OSDP Panel XS Reader
Specifications
- Operation Temperature: -30°C to 70°C
- Humidity: 35% to 85%
- RFID Frequency: 13.56 Mhz
- Bluetooth Smart Frequency: 2.445 Ghz to 2.4835 Ghz
- Cable Types and Max Distances:
- UTP Cat5e 2 pairs: 279ft (85m)
- UTP Cat5e 4 pairs: 853ft (260m)
- Twisted pairs: 1312ft (400m)
- Power Consumption: 150 mA
Product Usage Instructions
Installation Guide
Dampen a lint-free cloth with alcohol. Wipe the surfaces clean
on both sides before installing the device.
Electrical Characteristics
Ensure the device is within the specified operation temperature
and humidity ranges for optimal performance.
RF Characteristics
Make sure the RFID frequency and Bluetooth Smart frequency are
within the specified ranges for proper communication.
Cable Type and Max Distances
Use the recommended cable types and ensure the distances do not
exceed the maximum limits for reliable connectivity.
Power Consumption
Monitor the power consumption to ensure it stays within the
specified range to prevent any issues.
FAQ
Q: What should I do if the LED signal does not blink?
A: The LED signal will only blink when the unit is programmed
with a PPD. Make sure the unit is programmed correctly.
INSTALLATION GUIDE
Panel XS Reader – OSDP
The Panel XS Reader – OSDP is designed to be integrated with third-party devices using the OSDP protocol to send the agreed data
content, which can be read from a SALTO digital key. It can be installed inside other form-factor products that permit good Bluetooth
connectivity.
MODEL: ELECTRONIC INFO. WRDP0M Copyright © 2025 Salto Systems, S.L.
4 (3/16″) 4 1 (1-5/8″) 4 5 (1-3/4)
LIGHT AXIS
30 (1-3/16″)
INSTALLATION GUIDE | Panel XS Reader – OSDP
10 (25/64″)
30 (1-3/15)
Eng Length: 3m Zh : 3m
Eng COVER STICKER
Zh
86g
Eng PANEL READER FIXING STICKER
Zh
228275 -ED.1-04/04/2025
PAGE 2/6
saltosystems.com
INSTALLATION GUIDE | Panel XS Reader – OSDP
Eng Installation D Installation E Instalación F Installation Zh 1
Green / Grün
B Verde / Vert /
OSDP RS485 Reader
White / Weiß
A Blanco / Blanc / OSDP RS485 Reader
Black / Schwarz Negro / Noir /
+V
Red / Rot / Rojo Rouge /
GND VIN (12V)
O5
METAL
6
The LED signal will only blink when the unit is programmed with a PPD.
2
2a
2b
228275 -ED.1-04/04/2025
PAGE 3/6
saltosystems.com
INSTALLATION GUIDE | Panel XS Reader – OSDP
3
60 mm min.
228275 -ED.1-04/04/2025
4
ON
PAGE 4/6
50 mm min.
METAL
8 mm max.
Dampen a lint-free cloth with alcohol. Wipe the surfaces clean on both sides before installing the device.
Befuchten Sie ein fusselfreis Tuch mit Alkohol, Wischenn Sie die Oberfläche vor der installation des Geräts beidseitig sauber.
Humedezca con Alcohol un paño sin pelusa. Limpie la superficie por ambos lados antes de instalar sobre ella el dispositivo.
Imbibez ub chiffon non peluchex d’alcool. Nettoyez la surface des deux côtes avant d’installer l’appareil
saltosystems.com
INSTALLATION GUIDE | Panel XS Reader – OSDP
5
Eng ALIGNED LIGHT AXIS
Zh
6
228275 -ED.1-04/04/2025
The LED signal will only blink when the unit is programmed with a PPD.
PAGE 5/6
saltosystems.com
INSTALLATION GUIDE | Panel XS Reader – OSDP
Eng Electrical characteristics:
Operation conditions
Min. Max. Unit
Temperature WRDM0P401
-30
70
C
Humidity
35
85
%
RF characteristics
Min RFID frequency Bluetooth Smart 2.4 frequency
Cen. 13.56 2.445
Max. Unit Mhz
2.4835 Ghz
Cable type and max. distances
CCaabbllee ttyyppee
ReRaedaedrer
UTP Cat5e 2 pairs 279ft
AWG24
85m
UTP Cat5e 4 pairs 853ft
AWG24 +
260m
SP224861/SP224895 Note2
Twisted pairs
1312ft
AWG18
400m
Power Consumption
Reader
Min Max Unit 150 mA
D Elektronische Eigenschaften:
Umgebungsbedingungen
Min.
Temperatur WRDM0P401
-30
Feuchtigkeit
35
Max. 70 85
Einheit C %
RF Frequenzen
Min RFID frequenz Bluetooth Smart 2.4 frequenz
Cen. Max. EiUnhneitit
13.56
Mhz
2.445 2.4835 Ghz
Verkabelung und max. entfernungen
CKaabbeleltytyppe
ReLaedseerr
UTP Cat5e 2 pairs 279ft
AWG24
85m
UTP Cat5e 4 pairs 853ft
AWG24 +
260m
SP224861/SP224895 Note2
Twisted pairs
1312ft
AWG18
400m
E Características eléctricas:
Condiciones ambientales
Min.
Temperatura WRDM0P401
-30
Humedad
35
Max. 70 85
Unidad C %
RF characteristics
Min Frecuencia RFID
Frecuencia
2.4
Bluetooth Smart
Cen. 13.56
2.445
Max. UnUidnaitd Mhz
2.4835 Ghz
Tipo de cable y distancias max.
CCaabbllee ttyyppee
ReaLedcetror
UTP Cat5e 2 pairs 279ft
AWG24
85m
UTP Cat5e 4 pairs 853ft
AWG24 +
260m
SP224861/SP224895 Note2
Twisted pairs
1312ft
AWG18
400m
Stromaufnahme
Reader
Min Max Einheit 150 mA
Consumo
Lector
Min Max Unidad 150 mA
F Caractéristique électronique:
Condition de fonctionnement
Min. Max. Unit
Température WRDM0P401
-30
70
C
Humidité
35
85
%
RF characteristics
Min
Fréquence RFID
Fréquence
2.4
Bluetooth Smart
Cen. Max. Unit
13.56
Mhz
2.445 2.4835 Ghz
Type de câble
Type de câble UTP Cat5e 2 pairs AWG24 UTP Cat5e 4 pairs AWG24 + SP224861/SP224895 Twisted pairs AWG18
Lecteur 279ft 85m 853ft 260m
Note 2
1312ft 400m
Consommation
Reader
Min Max 150
Unité mA
Zh
WRDM0P401
-30 35
70 85
C %
RF
RFID
2.4
13.56 2.445
2,4835
Mhz Ghz
UTP Cat5e 2 Pairs AWG24 UTP Cat5e 4 Pairs AWG24 + SP224861/SP224895 Twisted Pairs AWG18
279ft 85m 853ft 260m
2
1312ft 400m
150
mA
228275 -ED.1-04/04/2025
PAGE 6/6
saltosystems.com
Documents / Resources
 |
salto OSDP Panel XS Reader [pdf] Installation Guide OSDP Panel XS Reader, OSDP, Panel XS Reader, XS Reader |