salcom P3 Watch Paging System
Dear Clients,
Thank you for using our products. We are committed to giving you the best product available today and we take the safety using and palatable using very seriously. At safety concerns, we encourage you to read this manual thoroughly and follow the suggestions carefully below for prolonging the service life of the product.
Please keep this instructing manual in case you may need it at any time in the future. Thanks again for choosing our products and service.
Technical Specifications
- Input DC: 5V/1A
- Work Frequency: 420~470Mhz
- Code Format: POCSAG
- Chanel Spacing: 20Khz
- Frequency Deviation: + 4.5Khz
- Module: FSK
- Boud Rate: 512/1200/2400bps
- Capcode Number: 8
- Display: 1.54” TN Color Display
- Screen: Touch Screen
- Alert by: Flash/Buzz/Vibrate
- Weight: 0.14kg
Features
- 420-470Mhz wideband.
- An effective working range of 200 meters at open area.
- Rugged rubber wristband able to bear a 15kg pulling force
- Receiving Alphanumeric messages with 128 letters at max
- Pocsag messages auto-wrap.
- Selective PC or hand programmable
- Replacable watch band
Know the Device
Remove the wrist band
The wrist bands are equiped with spring bars thus to make them very easy to detach from the watch body. Just simply press the spring bar and then the bands can be removed. 
System Setting
Basic system settings are included as bellow
- Date/Time
“Date/Time”—“Time Calibration”
Enter a number which should be the total delayed/exceed seconds in past 30 days when we see an image as Pic 1. For example, the clock is 2 seconds behind one day, then we should input -60. On the contrary, if it is 2 seconds beyond, 60 is required.
- Backlight Time
Auto Clear
Time It refers to the seconds that POCSAG messages keep staying on the watch. One page can display 3 lines, and those info. will keep displaying on the screen until they are wiped out by users or the clear time is up.
- Alarm Clock
Buzzer Volume
Buzzer volume can be regulated from grade 1 to grade 10 , the higher the bigger.
- Prompt Mode
Low Power Level
Factory Reset All personal settings will be wiped out, so please be careful with this option.
Don’t Disturb careful with option “YES”. No messages will be received by the watch if we choose that.
- About Me 1
Upgrade Program System upgrade under supervision is highly recommended. To make upgrade successful, a burner with two cables, and a new .hex system document are required. Please ask our sales representatives or agency for more details.
POCSAG Settings
- Frequency
Frequency bandwidth is 420Mhz~470Mhz. - Baudrate
They are optional with 512/1200/2400bps. - Capcode 1 to Capcode 8
We can restore 8 capcodes at the same time at maxmium.
Message
A watch can restore 30 messages, with one new messeage coming in, an oldest messages will be replaced. One pocsag message can contain 128 letters and symbols. Messages will be auto-wrap. 
X: delete one messsage
delete all messages
Daily Care
To prolong the service life of the product, serval tips during daily using are highly recommanded.
- The watch is designed with IP51 waterproof, which the vertial liquid/water drops wonnot harm the system. Just wipe out the drops immeditately with soft cloth such as lens cloth. But immerge in water will cause permenant damage and invalidate the warranty.
- Regularly clearn the touch screen with lens cloth.
- Watch will stop charging the battery when it is full. Deplug it at this time is highly recommended for a prolonged battery life.
- Do not alter the system or modify the circuit without our guidance.
Documents / Resources
 |
salcom P3 Watch Paging System [pdf] User Manual P3, P3 Watch Paging System, Watch Paging System, Paging System |
