SaitaKE STK-I5 Wireless Controller for NS
Instruction
Operation
- Switch console settings
Turn on the N-S console, press the Setting on the menu, click successively System Setting – Airplane Mode – Controller Connection – to turn on the Bluetooth function. - Connection on Bluetooth
- Power on the controller by pressing the button of
on the left controller and the button of 
on the right controller, the 4 led will flash circularly. - Turn on the home screen of the console, click the Controller on the menu, then click the Change grip/order, the console will be searching and paring the controllers automatically. Press L1+R1 button after connecting the console, Press the A button quit the menu, choose the Close to quit then you can start the game.
- Power on the controller by pressing the button of
- Reconnection on Bluetooth
Power on the console, press Button and on left and right controller, the Controller will automatically to connect to console with vibration shortly.
Note:
The controller had been Paired & Connected with the console and the console’s Bluetooth should be turned on. - Connection on wired
- Plugin both left & right controllers into the console, and confirm the controller touched the console well.
- Power on console, then press A button on the right controller. Both left & right controllers will connect to the console.
- You can start your gaming by pressing buttons.
T (Turbo) Function
- T (TURBO) button function:
TURBO buttons have 3 gears: TURBO/AUTO/CLEAR
TURBO → AUTO → Cancel (3 functional cycles) - The speed of the Turbo is 20 rounds per second;
- Turbo Function Set:
First hold T, then hold one of the function keys to set turbo function. Release both buttons, the set is completed. - Auto Function Set:
Press T first, then press the button that had been set
Turbo function to set the AUTO function. - Quit Auto Set:
First, press the T key, press the button that has been set Auto function to quit set. - Unset:
Long press T for 5 seconds, TURBO indicator lights off, release the button to complete
Turbo Indication
- The TURBO indicator will always turn on after the TURBO function has been set with the buttons.
- During execution, the indicator light flashes in the flicker mode twice a second (as indicated by the AUTO function).
- No TURBO key setting function, the indicator light is not on.
Charge & Update
Charge For Controllers
The controller is not connected: When charging, the indicator light of the four channels flashes slowly at the speed of once a second.The indicator light will goes out with full power charged. The controller is connect by wireless: When charging, the indicator light of the corresponding channel will flash slowly at the speed of 1 second once. When the battery is full, the indicator will return to the normal indicating state.
Factory Motion Calibration
Left controller calibration method:
make sure the controller is power off, long-press the combination key “UP+L1+ Screenshot” to power on the controller. The four LED lights are divided into two groups of alternating flashing instructions. Place the controller on flat, stable surface and press the “-” key to complete the calibration.
Right controller calibration method
make sure the controller is power off, long-press the combination key “X+R1+HOME” to power on the controller.The four LED lights are divided into two groups of alternating flashing instructions. Place the controller on flat, stable surface and press the “+” key to complete the calibration
Product Specification
- Product Name: Wireless Controller For N-S Console
- Item No.: STK-I5
- BT Solutions: BT2.1+EDR
- Single Product Size: 65*125*62mm
- Product Weight: 145g around
- Battery: 3.7V 300mAh
- Contious Using Time: 8-10H
- Charging Time: 1-1.5H
Documents / Resources
 |
SaitaKE STK-I5 Wireless Controller for NS [pdf] User Manual STK-I5, STKI5, 2ATI7STK-I5, 2ATI7STKI5, STK-I5, Wireless Controller for NS |
