SABRENT HB-BUP7 USB 3.0 Hub With Power Switches
You can now attach your collection of USB devices to one SuperSpeed hub with the Sabrent USB 3.0 7-PORT HUB WITH Power Switches. Easily expand an available USB 3.0 port on your computer to 7 USB 3.0 ports with a sleek design. Plug & Play installation makes for an easy setup.
Package contents
- USB 3.0 7-PORT HUB with Power Switches
- 12V 3A Power adapter
- USB 3.0 Cable
Features
- Plug & Play: No driver installation is required
- Windows, Mac OS & Linux Supported
- Fashionable mirrored surface with a compact design
- Blue LED to indicate the power status for each port
- 7 USB 3.0 ports allow data transfer speeds up to 5Gbps
- Backward compatible with USB 2.0 and 1.1
- Sync Card Readers, Phones, Hard Drives, and other USB peripherals
OVERVIEW
- Hub Power Indicator
- USB 3.0 Ports
- Port Power Indicator
- Port Power Switches
- USB 3.0 Port ( to Computer) 6 – Power Port (to Power Adapter)
INSTRUCTIONS
- CONNECT THE POWER ADAPTER TO THE HUB
- THEN TO A POWER OUTLET
- CONNECT THE use CABLE TO THE HUB
- THEN TO YOUR COMPUTER
- ACTIVATE A PORT BY PRESSING ANY OF THE PORT POWER SWITCHES
- CONNECT YOUR use ounces TO ANY OF THE 3.0 use PORTS
TROUBLESHOOTING/SUPPORT
Power LED does not come on?
- Make sure that you have a tight connection between the power adapter and Hub.
- Try it on a different power outlet.
Computer does not recognize the Hub?
- Make sure that you have a tight connection between the Hub and 3.0 cable.
- Try the USB cable on a different USB port on your computer.
Please contact our Technical Support with any questions.
Documents / Resources
 |
SABRENT HB-BUP7 USB 3.0 Hub With Power Switches [pdf] User Manual HB-BUP7, USB 3.0 Hub With Power Switches, HB-BUP7 USB 3.0 Hub, 3.0 Hub, Hub, HB-BUP7 USB 3.0 Hub With Power Switches, Hub With Power Switches, Power Switches, Switches |
