RZB LIGHTING LINEDO Continuous Line Luminaire
Product Information
Specifications
- Model: LINEDO 952390.850.776.702
- Power Supply: 220 – 240 V, 50/60 Hz
- IP Rating: IP 54
- IK Rating: IK03
- Dimensions (mm): L 2291, B 58, H 76
- Weight: 4.54 kg
- Light Source: LED
- CCT: 3400K
- CRI: 23
- Power Consumption: 1 x 19.7 W
- Luminous Flux: 5000 lm
- Operating Temperature: T50
- Frequency Range: fmin- fmax 80 MHz – 20 MHz
- Wireless Communication: RG 1 B16 (St.)
- Effective Radiated Power: pEIRP 0 mW
- Maximum Coverage Area: C16 52 (St.)
- Cosine Value: 0.95
Product Usage Instructions
General Safety Information:
- Electric connection must adhere to all safety standards.
- Use genuine parts for repair.
- Ensure ceiling stability during installation.
Operation of the Luminaire:
- Avoid exceeding the permissible ambient temperature to prolong the luminaire’s lifespan.
- Do not route wiring along the luminaire’s power supply to prevent ESD problems.
Product Modification:
- Manipulation of the product is not allowed as it may damage the product and void warranty.
- Modifications may negatively affect the technical properties of the product.
FAQ
Q: Can I install the luminaire outdoors?
A: The luminaire has an IP rating of IP54, suitable for outdoor use, but ensure proper installation to prevent damage.
Q: What is the recommended power supply voltage for this product?
A: The product is designed for a power supply of 220-240V at a frequency of 50/60 Hz.
PARAMETER
INFO
TOOLS
General Safety Information
- Electric connection must be appropriate according to all applicable standards and other national and international safety and accident prevention regulations.
- Damaged luminaires must not be operated.
- No liability is accepted for damages resulting from improper use.
- Use genuine parts only for repair.
- Ensure stability of the ceiling and fastening elements.
Operation of the luminaire
- Exceeding the permissible ambient temperature will reduce the luminaire’s lifecycle, resulting in premature failure in extreme cases.
- Avoid ESD problems by not routing feed- through wiring directly along the wiring of the luminaire.
- Connect control inputs of dimmable luminaires with standard cables suitable for power supply voltage.
Manipulation of our products is not permitted
Modifications, reworking, re-labelling of products as well as their package is not permitted and infringes, amongst others, our registered trademark rights. Such modifications may affect technical properties of our products, damage them and possibly cause consequential damage to other objects.
The manufacturer shall not be responsible under any circumstances for damage caused by such modifications.
PRODUCT INFORMATION
https://www.rzb.de/fileadmin/assets/downloads/PDF/RZB_Symbolklaerung.pdf
Reference for application
Reference for application of lumiaires with D – marking according to EN 60598-2-24
WARNING
DIMENSIONS
EC-Declaration of Conformity
Manufacturer, address:
Rheinstrasse 16
96052 Bambera
Product designation:
LINED
952390.850.776.702
complies with the following EC Directives and standards:
Document No.
Issuer
Place, Date
Legally binding signature:
24011661
RZB Rudolf Zimmermann, Bamberg GmbH
Bamberg, 02.02.2024
UNPACKING
ASSEMBLY INSTRUCTION
CAUTION
CONTACT
RZB – Rudolf Zimmermann, Bamberg GmbH
A Rheinstraße 16, 96052 Bamberg
С 0951/7909-0
0951/7909-198
@info@rzb-leuchten.de
Documents / Resources
 |
RZB LIGHTING LINEDO Continuous Line Luminaire [pdf] Instruction Manual 952390.850, 776, 702, LINEDO Continuous Line Luminaire, LINEDO, Continuous Line Luminaire, Line Luminaire, Luminaire |
 |
RZB LIGHTING LINEDO Continuous Line Luminaire [pdf] Instructions LINEDO Continuous Line Luminaire, LINEDO, Continuous Line Luminaire, Line Luminaire, Luminaire |