RYET High-Performance Saddle Owner’s Manual

RYET High-Performance Saddle

Specifications

PRODUCT & SAFETY

High-performance saddle with full-carbon shell/rails and 3D-printed lattice surf ace for lightweight comfort and ventilation.

CRITICAL WARNINGS

• Inspect after any impact. Do not use if damaged.
• Use only a 7x9mm oval carbon rail-compatible clamp.
• Always use a torque wrench. Do not overtighten .
• Max system weight: 120 kg.

INSTALLATION

• Apply carbon paste to rails.
• Insert into clamp, set horizontal.
• Torque clamp bolts to 5-6 N· m max using a cross pattern. Re-check alignment.
• Max system weight: 120 kg.

CARE

• Clean with water, mild soap, and a soft brush. Air dry.
• Do not use solvents, abrasives, or high-pressure water.
• Store away from direct sunlight and heat.
• Periodically inspect rails and shell for wear.

FOR SAFETY,  CONSULT A BIKE MECHANIC IF UNSURE.  ENJOY YOUR RIDING TIME!

FAQ

What should I do if the saddle is damaged?

Do not use the saddle if it is damaged. Inspect it after any impact.