runcom Scope cam 2 User Manual
a close up of a camera

Instruction Diagram

  1. WiFi Button
    diagram
  2. Powering on /off Switch
  3. LED1 Red Light(Recording Status)/ Blue Light(WiFi Status)
  4. LED2 Red Light( Recording Status)/ Green Light (Charging Status)
    diagram, schematic
  5. Type-C
  6. Micro-SD Card Slot
  7. MICROPHONE
Charging:

Type-C only supports DC 5V power supply, please use conventional phone charger or power bank.
Green light will turn on during charging, while it will tun off when it is fully charged.It takes about 2
hours to get fully charged.

Low Battey Reminder:

When the battery is lower than 8%, the camera vibrates 4 times continuously, 30s each vibration.

MicroSD Card

Capacity up to 128GB; High Speed SD card (Class 10/UHS-I/UHS-II/UHS-III )is highly recommended
Note: The camera only supports FAT32 or exFAT format, SD cards over 64GB must be formatted via the App.

Basic Camera Operation

  Start Recording  Push button up,
LED1, LED2(Red Light) have a slow flash at 1s interval simultaneously
  Stop Recording  Push button down,
LED1 and LED2(Red Light) turn off simultaneously
  Open WIFI  Operation1: Long Pressing WIFI button 3s in recording status
Waiting for a connection: LED1( Blue light flashes slowly at 1s interval),
Connected: LED1(Blue Light is on)
  Operation2: Long Pressing WIFI button 3s in shutdown status
Waiting for a connection: LED1( Blue light flashes slowly at 1s interval)
Connected: LED1(Blue Light is on)
  Close WIFI  Long pressing WIFI button 3s,
LED1 (Blue light) off, the camera turns off simultaneously
  Forced shutdown  Long pressing WIFI button 8s
  Abnormal Status  No SD card or SD card abnormality, LED1,
LED2 have a quick flash simultaneously

Connection to the Computer

diagram

U Disk Mode:

Connecting to PC via TYPE-C to USB, the camera will enter into U disk mode automatically, recording indicator(red light) is on

WEBCAM/PCCAM/UVC Mode

Short pressing WIFI button to switch to WEBCAM/PCCAM/UVC mode in U disk mode, then Short pressing WIFI button can switch back and forth to U Disk or WEBCAM mode.
NOTICE: If the camera cannot be recognized after connecting to the computer, please confirm whether there is microSD card in Scope cam 2.
If the information in the SD card cannot be read normally, please replace the USB cable or retry the computer USB port.

APP

  1. Long press WiFi button 3s, LED1(blue light) flashes, WiFi is started and waiting for connection.
  2. Find the SSID connection of the Scope Cam 2 in the wireless network of the mobile phone and enter the password, after successful connection, firmware update/WIFI indicator(blue light) is constantly on
  3. Default SSID: RCSC02_*****PW:1234567890
Android and iOS APP:

Search ‘RunCam App’ on Google Play/App Store, or download on our website: https://runcam.com/download/scopecam2

Firmware Upgrade

Firmware Upgrade Status (Blue light blinks)Ensure that the Scope Cam battery is more than 50% before the upgrade
Manually copy the firmware file (FWSCLITE.bin) onto the microSD card. Follow the instruction on
https://runcam.com/download/scopecam2
To get the latest features and best performance from your Scope Cam, make sure you are using the
most current camera software. You can update your firmware with the RunCam App or at
https://runcam.com/download/scopecam2

Parameter

  Image Sensor  1/2.9”CMOS 2MP
  Lens  40mm@FOV 8.2  25mm@FOV 12°  3.6mm@FOV 126
  ISO  100 / 200 / 400 / 800 / 1600
  Shutter  1~1/500s
  Resolution  1080P@60fps / 1080P@50fps / 720P@90fps
  Video format  MP4(H.264)
  Memory Card  Micro SD(Max 128g)
  File system  Fat32/exFat
  Battery  1400mAh
  Battery life  About 240 minutes (1080P@60fps)
  Charging time  About 120 minutes
  Wi-Fi  2.4g
  USB Interface  Type-C
  Work Current  1.25W (wi-fi off)
  Work Temp  -10°C ~ 45°C
  Housing Material  Aluminum alloy & PA
  Vibration motor  Built-in
  Waterproof  IP64
  Mount  Picatinny
  Net Weight  40mm@135g  25mm@130g  3.6mm@118g
  Dimensions  112mm*32mm*36mm  93mm*32mm*36mm  79mm*32mm*36mm
Technical Support

Please visit: https://support.runcam.com/hc/en-us

 

Read More About This Manual & Download PDF:

Documents / Resources

runcom Scope cam 2 [pdf] User Manual
Scope cam 2

References

Leave a comment

Your email address will not be published. Required fields are marked *