Ruijie-RC-RAP2200E-Dual-Band-Ceiling-Mount-WiFi-Access-Point (9)

Ruijie RC-RAP2200E Dual Band Ceiling Mount WiFi Access Point

Ruijie-RC-RAP2200E-Dual-Band-Ceiling-Mount-WiFi-Access-Point (8)

To better use the Ruijie device, read this manual before Installation and usage, and save the manual for future reference.

Packing List

Item Name Quantity Unit
1 RG-RAP2200(E)Host 1 Set
2 Mounting Bracket 1 Piece
3 Phillips Pan Head Screw 2 Piece
4 Expansion Anchor 2 Piece
5 This Quick Installation Guide 1 Copy
6 Warranty Card 1 Copy

Appearance and Interface

Top View

Ruijie-RC-RAP2200E-Dual-Band-Ceiling-Mount-WiFi-Access-Point (1)

Bottom View  Ruijie-RC-RAP2200E-Dual-Band-Ceiling-Mount-WiFi-Access-Point (2)

  1. When powering the AP through PoE, connect one end of the Ethernet cable to LAN1/PoE port and the other end to a PoE-capable device.
  2. When powering the AP via local power supply, connect the DC-12V/1.5A power adapter to the power port.

LED Indicator and Button

LED Indicator and Button Frequency Description
 

 

 

 

 

 

 

LED Indicator

Solid green Normal operation
Off The AP not receiving power.
 

Blinking(0.5Hz)

Normal operation, but the AP is not connected to Ruijie Cloud.
 

 

 

Fast blinking(10Hz)

Possible cases:

1.  Restoring the factory default settings

2.  Upgrading the firmware 3.Restoring the image file

4. Initializing the device

 

 

Reset Button

Press for less than 2 seconds Restart the device
Press for more than 5 seconds Restore the factory default settings

Product Installation

Attach the mounting bracket on the ceiling.

 

Ruijie-RC-RAP2200E-Dual-Band-Ceiling-Mount-WiFi-Access-Point (3)Ruijie-RC-RAP2200E-Dual-Band-Ceiling-Mount-WiFi-Access-Point (4)

Connect the Ethernet cable to the LAN portRuijie-RC-RAP2200E-Dual-Band-Ceiling-Mount-WiFi-Access-Point (5)

Align the square feet on the rear of the AP over the mounting holes on the bracket. Slide the AP into the holes until it clicks into place.

Network Configuration

Method 1 (Recommended)
Scan the QR-code on the manual or device to download the Ruijie Cloud App, and configure the network according to guide on App.Ruijie-RC-RAP2200E-Dual-Band-Ceiling-Mount-WiFi-Access-Point (6)

Method 2
Connect to the SSID (@Ruijie-mxxxx when there are multiple devices and @Ruijie-sxxxx when there is only one device), or connect the cable with LAN port, and visit http:/110.44.77.253 (default password: admin). It is recommended to configure the IP address as 10.44.77.250.
Note: This equipment is restricted to indoor operation in 5.15-5.25GHz for Hong Kong.

Documents / Resources

Ruijie RC-RAP2200E Dual Band Ceiling Mount WiFi Access Point [pdf] Installation Guide
2AX5J-RAP2200E, 2AX5JRAP2200E, rap2200e, RC-RAP2200E Dual Band Ceiling Mount WiFi Access Point, Dual Band Ceiling Mount WiFi Access Point, Ceiling Mount WiFi Access Point, Mount WiFi Access Point, WiFi Access Point, Access Point

References

Leave a comment

Your email address will not be published. Required fields are marked *