TP-Link 4G LTE Router: Quick Installation Guide

Get Connected Quickly

This guide provides essential steps to set up your TP-Link 4G LTE Router. Learn how to connect the hardware, configure your device, and find answers to common questions.

Hardware Setup

Follow these simple steps to connect your router:

1. Install the 4G LTE antennas and position them upwards.
2. Insert the SIM card into the slot until you hear a click.
3. Turn on the router.

Once powered on, connect your device to the router via cable or Wi-Fi. The default SSID and password are printed on the product label at the bottom of the router.

Initial Configuration

To customize your 4G LTE Router:

1. Ensure your computer is connected to the router (wired or wireless).
2. Open a web browser and navigate to http://tplinkmodem.net or 192.168.1.1.
3. Log in using the default credentials (admin/admin) or your newly created password.
4. Follow the on-screen instructions in the Quick Setup to complete the initial configuration.

For more detailed information and advanced settings, refer to the User Guide available at www.tp-link.com.

Frequently Asked Questions

Encountering issues? Find solutions to common problems:

• Login Page Not Appearing: Verify your computer's IP settings, ensure the URL is correct, try a different browser, or reboot your router.
• No Internet Access: Check your SIM card's validity, ensure it's within your ISP's service area, and verify sufficient credit. Also, review LAN connection, ISP parameters, PIN settings, data limits, and data roaming settings.
• Resetting to Factory Defaults: Press and hold the WPS/RESET button on the router until the Power LED flashes.
• Forgotten Passwords: For web management password, refer to the reset procedure. For Wi-Fi password, check the product label or log in to the web management page.