TP-Link 4G LTE Router: Quick Installation Guide

Getting Started

This guide provides essential steps for the quick installation and setup of your TP-Link 4G LTE Router. Learn how to connect the hardware and perform the initial configuration to enjoy internet access.

Hardware Connection

Follow these simple steps to connect your router:

1. Position the antennas vertically.
2. Insert the SIM card into the slot until you hear a click.
3. Turn on the router.

Once connected, you can enjoy the internet by connecting your device (wired or wireless). The default SSID and password are printed on the product label at the bottom of the router.

Initial Configuration

To customize your 4G LTE Router:

1. Ensure your computer is connected to the router (wired or wireless).
2. Open a web browser and enter http://tplinkmodem.net or 192.168.1.1. Use the default credentials (admin for both username and password) or your newly created password to log in.
3. Follow the on-screen instructions on the Quick Setup page to complete the initial configuration.

For additional support and detailed information, please visit the TP-Link support website at https://www.tp-link.com/support/.

Troubleshooting

Encountering issues? Refer to the FAQ section for common problems and solutions:

• Login Page Not Appearing: Verify computer's IP settings, check the URL, try a different browser, reboot the router, or re-enable the network adapter.
• No Internet Access: Check SIM card compatibility (LTE/WCDMA), ensure it's in the service area, verify sufficient credit, check LAN connection, confirm ISP parameters, check PIN settings, and review data limits and mobile data settings.

For more troubleshooting assistance, consult the comprehensive FAQ on the TP-Link website.