DLAB is a leading global manufacturer of reliable, high-quality laboratory instruments, specializing in clinical centrifuges and precision pipettes.
DLAB (DLAB Scientific) is a premier provider of high-quality laboratory instruments and equipment, recognized globally for its reliability and precision. Their extensive product lineup includes essential lab tools such as clinical and micro-centrifuges, single-channel and multi-channel mechanical pipettes, digital electronic titrators, and thermal control instruments.
Built to withstand rigorous laboratory environments, DLAB products cater to medical, research, and educational facilities. Certified according to international standards, their devices ensure accurate liquid handling, sample separation, and dependable analysis for everyday scientific tasks.
Последние руководства от manuals+ специально для этого бренда.
Распространенные вопросы о руководствах, регистрации и поддержке этого бренда.
To calibrate your DLAB pipette, insert the calibration tool into the ejector button hole, press down, and turn the adjusting knob. Turning clockwise decreases the volume, while turning counterclockwise increases it. Always test and weigh the dispensed liquid (preferably with distilled water at 20-25°C) to ensure it falls within the systematic error range.
Yes, DLAB HiPette pipettes are fully autoclavable at 121°C and 1 atm for 20 minutes. Wrap the pipette in gauze before autoclaving, allow 12 hours to dry before use, and grease the sealing ring and piston after every 10 sterilization cycles.
Stop the centrifuge operation immediately. Consult the troubleshooting section of your DLAB operational manual for specific failure codes. If the issue persists, contact the DLAB service center and provide the specific failure code for further assistance.
User manuals, operation guides, and specification sheets for DLAB centrifuges, pipettes, and other laboratory equipment can be found right here on Manuals.plus or through the DLAB official support portal.