Инструкция по эксплуатации коммерческого льдогенератора Silonn SLIM12T

Введение

This manual provides detailed instructions for the safe and efficient operation, installation, and maintenance of your Silonn Commercial Ice Maker, model SLIM12T. Please read this manual thoroughly before using the appliance and retain it for future reference.

The Silonn SLIM12T is designed to produce up to 150 lbs of ice per day with a 33 lbs storage capacity, suitable for various commercial and home settings.

Image: Silonn Commercial Ice Maker SLIM12T, showcasing its stainless steel exterior and the included accessories: an ice scoop, drain hose, water quick connector, and water hose.

Image: A visual representation of the Silonn ice maker's versatility, showing its application in diverse environments such as coffee shops, food trucks, bars, and outdoor entertaining areas.

Основные характеристики

The Silonn SLIM12T Commercial Ice Maker incorporates advanced design and technology for efficient and reliable ice production:

• Высокая емкость: Produces up to 150 lbs of ice in 24 hours with a 33 lbs storage bin.
• Добыча быстрого льда: Ice ready in 8-15 minutes per cycle.
• Регулируемая толщина льда: Customize ice cubes to thin, medium, or thick.
• Автоматическая самоочистка: Упрощает техническое обслуживание и обеспечивает гигиену.
• Dual Water Supply Options: Manual fill or direct connection to a water source.
• Интуитивно понятная ЖК-панель управления: Easy operation with timer and light functions.
• Прочная конструкция: Made with stainless steel for longevity.

Image: An illustration detailing the four key system upgrades that contribute to the ice maker's efficient ice production and fast cooling, including air cooling, a high-efficiency compressor, multi-fan cooling, and a thickened insulation layer.

Важная информация по безопасности

Чтобы снизить риск возгорания, поражения электрическим током или травм при использовании льдогенератора, соблюдайте следующие основные меры предосторожности:

• Перед использованием прочтите все инструкции.
• Подключайте только к заземленной розетке.
• Do not immerse the power cord, plug, or the appliance in water or other liquids.
• Присматривайте за детьми во время использования прибора.
• Не работайте с поврежденным шнуром или вилкой.
• Не использовать на открытом воздухе.
• Обеспечьте надлежащую вентиляцию вокруг устройства.
• Используйте только питьевую воду.
• Перед чисткой или обслуживанием отключайте его от сети.

Содержимое упаковки

Проверьте наличие всех предметов в упаковке:

• Silonn Commercial Ice Maker (SLIM12T)
• Лед Совок
• Сливной шланг (6.6 футов)
• Water Quick Connector
• Water Hose (9.1 ft)
• Руководство по эксплуатации (данный документ)

Настройка и установка

1. Размещение

• Установите льдогенератор на ровную, устойчивую поверхность.
• Ensure adequate clearance (at least 5 inches) around the unit for proper ventilation.
• Избегайте воздействия прямых солнечных лучей и источников тепла.
• The ambient temperature should be between 10°C (50°F) and 32°C (90°F).

2. Подключение к водопроводу

The SLIM12T offers two water supply options:

1. Manual Water Addition: Open the top lid and pour potable water directly into the water reservoir. The unit will alert you when water runs low.
2. Прямое подключение к воде: For continuous operation, connect the ice maker to a potable water source.
   • Найдите патрубок для подачи воды на задней панели устройства.
   • Attach the provided water hose to the water quick connector, then connect it to your water supply.
   • Убедитесь, что все соединения надежны и не допускайте утечек.

3. Подключение сливного шланга

Connect the provided drain hose to the drain outlet at the back of the unit. Route the drain hose to a suitable drain point, ensuring it has a continuous downward slope for proper water drainage.

Изображение: подробное view of the rear panel connections, illustrating the tap water inlet hose, power cord, and water drain hose. An installation guide for hose connections is also shown.

4. Первоначальная очистка

Before first use, it is recommended to clean the ice maker. Refer to the "Maintenance" section for detailed cleaning instructions, including how to use the self-cleaning function.

Инструкция по эксплуатации

Панель управления надview

Image: Close-up of the Silonn ice maker's advanced LCD control panel, detailing the functions of the LIGHT, TIMER, ON/OFF (with CLEAN function), and +/- buttons for adjusting settings.

• СВЕТ: Press to turn the internal blue light on or off.
• ТАЙМЕР: Quickly press to enter the reservation time setting mode.
• ВКЛ/ВЫКЛ: Нажмите, чтобы включить или выключить устройство.
• ЧИСТЫЙ: Hold the ON/OFF button for 5 seconds to activate the self-cleaning function.
• +/-: Use these buttons to adjust the ice making process duration and time settings (e.g., ice thickness, timer).

Процесс производства льда

1. Ensure the water supply is connected or the reservoir is filled.
2. Нажмите ВКЛ/ВЫКЛ button to start the ice making cycle.
3. Adjust ice thickness (thin, medium, or thick) using the +/- buttons if desired. The ice making cycle typically takes 8-15 minutes.
4. The unit will automatically produce ice until the ice bin is full or the water level is low.
5. An alarm will sound if the water runs out, prompting a refill.

Image: Illustration demonstrating the adjustable ice thickness settings (Thin, Medium, Thick) and their corresponding production times, allowing customization for various beverage types.

Image: Infographic highlighting the Silonn ice maker's daily production capacity, indicating it can produce over 7000 ice cubes, sufficient for more than 800 drinks per day.

Функция таймера

The timer function allows you to set a reservation time for the ice maker to start or stop.

1. Нажмите ТАЙМЕР кнопка.
2. Используйте +/- buttons to set the desired delay time (e.g., 8 hours, 10 hours).
3. The unit will automatically begin or end operation after the set time.

Image: Visual representation of the 24-hour time reservation feature, demonstrating how users can schedule ice production for specific times during the day or night.

Обслуживание

Функция самоочистки

The ice maker is equipped with an automatic self-cleaning function to simplify maintenance.

1. Ensure the unit is connected to a water supply or the reservoir is filled.
2. Держите ВКЛ/ВЫКЛ button for 5 seconds. The unit will enter self-cleaning mode.
3. The cleaning cycle will run automatically. Once complete, drain any remaining water.

Регулярная уборка

• Экстерьер: Протрите внешнюю поверхность мягкой тряпкой.amp Ткань. Не используйте абразивные чистящие средства или растворители.
• Контейнер для льда: Periodically remove the ice bin and wash it with mild soap and water. Rinse thoroughly and dry before replacing.
• Резервуар для воды: If using manual fill, regularly clean the water reservoir to prevent mineral buildup.
• Дренаж: Ensure the drain hose is clear and free of obstructions.

For optimal performance and hygiene, perform regular cleaning and utilize the self-cleaning function as needed.

Поиск неисправностей

Прежде чем обращаться в службу поддержки клиентов, ознакомьтесь со следующими распространенными проблемами и решениями:

Технические характеристики

Image: Diagram illustrating the physical dimensions (Width, Depth, Height) and weight of the Silonn ice maker, along with a visual list of included accessories.

Гарантия и поддержка клиентов

Silonn provides excellent customer care. For warranty information, product support, or assistance with setup and operation, please contact our U.S.-based customer care team. Refer to your purchase documentation or the Silonn webсайт для получения конкретных контактных данных.

Please have your model number (SLIM12T) and purchase date available when contacting support.