SENTRO Knitting Machine 22 Needles Instruction Manual

Введение

Thank you for choosing the SENTRO 22 Needles Smart Circle Knit Loom Machine. This versatile knitting machine is designed to make knitting projects effortless and enjoyable for both beginners and experienced crafters. With its two knitting modes, you can easily create a variety of items such as hats, scarves, and more. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure you get the most out of your knitting machine.

The SENTRO 22 Needles Knitting Machine, capable of producing various knitted items.

Информация по безопасности

• Keep the machine away from small children when not in use, as it contains small parts.
• Always supervise children during use. Recommended for ages 6 and up.
• Do not force the crank if it becomes stiff; check for tangled yarn or obstructions.
• Use only appropriate yarn sizes (1-3mm) to prevent damage to the needles.
• Clean the machine regularly to ensure smooth operation.

Содержимое упаковки

Upon opening your SENTRO Knitting Machine package, please ensure all the following items are present:

• SENTRO 22 Needles Knitting Machine
• Руководство по эксплуатации

Продукт болееview

Компоненты

Familiarize yourself with the main components of your knitting machine:

Key components of the SENTRO Knitting Machine.

• Yarn Elastic Adjuster: Controls yarn tension for consistent stitches.
• Manual Handle (Crank): Used to manually rotate the needles and create stitches.
• Flat Weave / Ring Weaving Conversion Key: Switch to select between flat panel and circular knitting modes.
• Hanging Needles: The individual needles that form the stitches.
• Натяжитель: Guides the yarn and helps maintain proper tension.

Numbered illustration of the main parts of the knitting machine.

Размеры

The SENTRO 22 Needles Knitting Machine has the following approximate dimensions:

Dimensions of the SENTRO 22 Needles Knitting Machine.

• Габаритные размеры (Д x Ш x В): Approximately 6 x 5 x 6 inches (Product Dimensions from specifications)
• Высота машины: Примерно 7.87 дюймов
• Machine Width (base): Примерно 9.84 дюймов
• Machine Depth (top view): Примерно 9.05 дюймов

Настраивать

Before you begin knitting, follow these steps to set up your machine:

1. Place the knitting machine on a stable, flat surface.
2. Ensure the suction cups (if included with your model) are securely attached to the surface for stability.
3. Select your desired knitting mode (circular or plain) using the conversion key.
4. Prepare your yarn. The machine works best with yarn sizes 1-3mm.

Инструкция по эксплуатации

The SENTRO knitting machine offers two primary knitting modes:

Switch between flat (P) and circular (T) knitting modes.

Getting Started (First Round of Yarn)

1. Thread the yarn through the tensioner.
2. Turn the crank slowly. As the first needle comes up, place the yarn behind it.
3. For the second needle, place the yarn in front of it. Continue alternating placing the yarn behind and in front of each needle as you turn the crank for the first full round.
4. After the first round, ensure the yarn is consistently fed through the tensioner and all needles are catching the yarn correctly.

Circular Knitting Mode (T-Gear)

This mode is ideal for creating tubular items such as hats, scarves, and socks.

1. Set the conversion key to the 'T' position.
2. Follow the 'Getting Started' instructions for the first round.
3. Once the first round is complete, continue turning the crank clockwise at a steady pace. The machine will automatically knit the stitches.
4. Monitor the yarn tension and ensure no stitches are dropped.
5. To finish, cut the yarn, leaving a long tail. Turn the crank slowly and use a crochet hook or needle to carefully remove each stitch from the needles.

Plain Knitting Mode (P-Gear)

This mode is suitable for flat panels, such as blankets, scarves, or pieces that will be sewn together.

1. Set the conversion key to the 'P' position.
2. Follow the 'Getting Started' instructions for the first round.
3. Turn the crank clockwise until the machine reaches the end of the row and reverses direction automatically.
4. Continue turning the crank, allowing the machine to knit back and forth.
5. To finish, cut the yarn, leaving a long tail. Turn the crank slowly and use a crochet hook or needle to carefully remove each stitch from the needles.

The SENTRO knitting machine is user-friendly for all ages.

Обслуживание

• Уборка: Regularly remove any lint or yarn fibers that accumulate around the needles and gears using a soft brush or cloth.
• Хранилище: Храните устройство в чистом, сухом месте, вдали от прямых солнечных лучей и экстремальных температур.
• Смазка: If the crank becomes stiff, apply a small amount of silicone-based lubricant to the moving parts, avoiding contact with the yarn path.

Поиск неисправностей

Технические характеристики

Гарантия и поддержка

For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official SENTRO website. We are committed to providing high-quality products and excellent customer service.