VJOYCAR 2-Way LCD Pager Remote Control DIY Install System

Руководство пользователя беспроводной автомобильной сигнализации

Бренд: VJOYCAR

Модель: 2-Way LCD Pager Remote Control DIY Install System

Введение

This manual provides comprehensive instructions for the installation, operation, and maintenance of your VJOYCAR Wireless Car Alarm System. This universal vehicle anti-theft security system features a 2-way LCD pager remote control, a siren horn, and integrated shock, vibration, window, door, and trunk open alarm capabilities. Designed for DIY installation, it offers advanced security without complex wiring.

Содержимое упаковки

Убедитесь, что в упаковке присутствуют все компоненты:

Components of the VJOYCAR Wireless Car Alarm System, including the siren, two remote keys, air sensor, and antenna.

Figure 1: Included components of the VJOYCAR Wireless Car Alarm System.

Настройка и установка

The VJOYCAR Wireless Car Alarm System is designed for quick and easy DIY installation, typically taking about 5 minutes. No cutting of original car cables is required, preserving your vehicle's circuit integrity.

Siren Installation

  1. Connect the red cable of the siren to the car battery's positive (+) terminal.
  2. Connect the black cable of the siren to the car battery's negative (-) terminal.
  3. Connect the high frequency antenna to the designated connector on the siren.
  4. Securely fix the siren in a suitable location, such as near the wiper, ensuring it is stable and protected.
Diagram showing the easy DIY installation of the car alarm siren by connecting red and black cables to the car battery.

Figure 2: Simplified diagram of the siren's power connection to the car battery.

Air Pressure Sensor Setup

  1. Locate the on/off button on the car adaptor air sensor and turn it on. The LED light will flash, indicating it is active.
  2. Plug the car adaptor air sensor into your car's cigarette lighter port. The red light will flash, confirming it is working.
  3. The air sensor can be removed and hidden anywhere in the car after it is fully charged (lasts for approximately 5 days on a full charge).
Image showing the car adaptor air sensor and its battery indicator, emphasizing its portability and charging via cigarette lighter.

Figure 3: The car adaptor air sensor, designed for easy plug-and-play operation.

Видеоруководство по установке

Video 1: Official VJOYCAR installation guide demonstrating the connection of the siren and antenna to the car battery.

Инструкция по эксплуатации

Постановка и снятие системы с вооружения

Use the 2-way LCD pager remote control to arm or disarm the alarm system. When armed, the system monitors for unauthorized entry or significant vibrations.

Video 2: Demonstration of arming and disarming the alarm system using the remote control.

2-Way Pager and Long Distance Monitoring

The system features a 2-way LCD pager remote control that receives notifications from the alarm siren. The RF high-frequency antenna ensures a communication range of up to 1000 meters (in open air conditions).

Image illustrating the 1000-meter range of the 2-way pager alarm system, showing a car in a parking lot and the remote control.

Figure 4: The 2-way pager remote control provides real-time alerts over long distances.

Sensor Functionality

The system incorporates multiple sensors to detect various threats:

Two images: top shows a car door being opened with a red dot indicating air sensor detection; bottom shows a car being towed with a red dot indicating shock sensor detection.

Figure 5: Visual representation of air sensor detecting door/trunk opening and shock sensor detecting car movement.

Video 3: Demonstration of the alarm triggering when a car door is opened.

Video 4: Demonstration of the alarm triggering when the car trunk is opened.

Find Car Function

With just one click on your remote, you can activate a function to help you locate your car in a large parking area.

Image showing a car park with a red location pin indicating the 'Find Car' feature, alongside the two remote keys.

Figure 6: The 'Find Car' feature assists in locating your vehicle.

Adjusting Vibration Sensitivity

The system offers 8 levels of vibration sensitivity, from low to high. You can adjust this setting to suit your environment and prevent false alarms.

Image showing the siren and remote keys with text indicating '8 Level of vibration sensitivity' and '1-8' for adjustment.

Figure 7: Adjusting the vibration sensitivity of the alarm system.

Video 5: Guide on how to adjust the siren's sensitivity using the remote control.

Режимы запуска

The alarm system supports four different trigger modes:

Image showing the siren and remote keys with text describing the '4 Kinds of Trigger Mode' and their functions.

Рисунок 8: Болееview of the four available trigger modes for the alarm system.

Обслуживание

To ensure the longevity and optimal performance of your VJOYCAR Wireless Car Alarm System, follow these general maintenance guidelines:

Поиск неисправностей

If you encounter issues with your VJOYCAR Wireless Car Alarm System, please consult the following common troubleshooting steps:

Проблема Возможная причина/решение
Siren does not sound or stops working.
  • Проверьте источник питания: Ensure the siren is perfectly installed and both power cables (red and black) have a secure power supply from the car battery.
  • Remote Control Setting: Verify that the 2-way remote control is not set to "auto disarm" mode. In this mode, if the remote is close to the car, the siren may not sound even if the car is shaken, as it disarms automatically.
  • Беззвучный режим: Check if the remote control is in "mute" mode (often activated by pressing a specific button, e.g., '#'). In mute mode, the siren will not sound, but the alarm will still notify the 2-way remote control.
  • Режим активации: Confirm that the vibration working mode is activated and on for both 1-way and 2-way remote controls.
  • Связаться со службой поддержки: If the issue persists, contact VJOYCAR customer support for further assistance or a potential replacement siren.
False alarms or excessive sensitivity.
  • Отрегулируйте чувствительность: The system has 8 levels of vibration sensitivity. Adjust it to a lower level if you are experiencing too many false alarms. Refer to the "Adjusting Vibration Sensitivity" section.
  • Режим триггера: Consider changing the trigger mode to one that is less sensitive to minor disturbances, such as Mode 4 which forbids vibration triggers.
Пульт дистанционного управления не отвечает.
  • Проверьте аккумулятор: Ensure the remote control's battery is not depleted. Replace if necessary.
  • Диапазон: Verify you are within the 1000-meter operating range. Obstacles like buildings can reduce effective range.

For any complex issues or if troubleshooting steps do not resolve the problem, please do not hesitate to contact VJOYCAR customer support. They can provide the latest user manual or specific assistance.

Технические характеристики продукта

Особенность Деталь
Бренд VJOYCAR
Вес товара 1.63 фунта
Размеры упаковки 7.83 x 6.3 x 3.39 дюйма
Беспроводной пульт ДУ Да
Совместимые устройства Cars (12-15V power input)
Максимальный диапазон 1000 Meters (RF high frequency antenna)
Уровень шума 125 дБ
Датчики Built-in shock/vibration sensor, built-in air pressure sensor
Тип установки Сделай сам (DIY)

Гарантия и поддержка

For warranty information, technical support, or to obtain the latest version of this user manual, please contact VJOYCAR customer service through their official channels. Your satisfaction is important, and they are available to assist with any questions or concerns regarding your product.

Вы также можете обратиться к официальному Руководство пользователя (PDF) для получения дополнительной информации.

Связанные документы - 2-Way LCD Pager Remote Control DIY Install System

Предварительноview Беспроводная автомобильная сигнализация VJOYCAR X6: руководство по установке и эксплуатации
Подробное руководство по установке и эксплуатации беспроводной автомобильной сигнализации VJOYCAR X6. Содержит комплектацию, пошаговую инструкцию по установке сирены, антенны и датчика воздуха, а также подробные инструкции по использованию односторонних и двусторонних пультов дистанционного управления, включая настройки триггера и чувствительности.
Предварительноview Руководство пользователя T10: функции, характеристики и эксплуатация
Полное руководство пользователя GPS-трекера T10. Узнайте о его функциях, технических характеристиках, установке, SMS-командах для отслеживания, удаленном прослушивании, оповещениях и управлении питанием.
Предварительноview Руководство пользователя автомобильного бортового компьютера V70 OBD
Руководство пользователя для автомобильного бортового компьютера V70 OBD, содержащее подробное описание его производства, технические характеристики, рабочие настройки, обновления программного обеспечения, параметры потока данных и процедуры обслуживания.
Предварительноview Технические характеристики и руководство пользователя VJOYCAR GPS HUD
Подробные технические характеристики, инструкции по эксплуатации и информация о гарантии на проекционный GPS-дисплей VJOYCAR (HUD) для легковых и грузовых автомобилей. Узнайте о его характеристиках, требованиях к питанию, условиях эксплуатации и гарантийных обязательствах.
Предварительноview Руководство пользователя GPS-трекера для транспортных средств — VJOYCAR
Подробное руководство пользователя GPS-трекера для транспортного средства VJOYCAR (версия V2.1), охватывающее установку, настройку, эксплуатацию, управление сигнализацией и устранение неисправностей.
Предварительноview Руководство пользователя проекционного дисплея (HUD) VJOYCAR W02 5.5 дюйма — установка, настройки и эксплуатация
Полное руководство пользователя проекционного дисплея (HUD) VJOYCAR W02 5.5 дюйма с интерфейсом OBDII. В руководстве описываются установка, основные функции, подробные настройки, общие процедуры эксплуатации, устранение распространённых неисправностей и технические характеристики для безопасного и комфортного вождения.