DELTA D75624SS

DELTA D75624SS 24-Inch Towel Bar Instruction Manual

Model: D75624SS

Продукт болееview

The DELTA D75624SS is a 24-inch towel bar designed for bathroom use. It features a durable zinc construction with a stainless finish, providing both functionality and a modern aesthetic. This manual provides detailed instructions for safe installation, operation, and maintenance.

DELTA D75624SS 24-inch Towel Bar in Stainless Steel finish

Image: DELTA D75624SS 24-inch Towel Bar. This image displays the complete towel bar assembly, including the bar and mounting posts, in a stainless steel finish.

Информация по безопасности

Внимательно прочтите все инструкции перед установкой и использованием. Несоблюдение этих инструкций может привести к повреждению имущества или травмам.

Содержимое упаковки

Перед началом установки убедитесь в наличии всех компонентов. Если какие-либо детали отсутствуют или повреждены, не продолжайте установку и обратитесь в службу поддержки клиентов.

Необходимые инструменты

Для установки обычно требуются следующие инструменты:

Инструкция по установке

Follow these steps to properly install your DELTA D75624SS 24-inch towel bar.

Шаг 1: Определите место установки

Choose a suitable location on your wall. Use a measuring tape and level to mark the desired height and ensure the towel bar will be level. The distance between the centers of the two mounting posts should be approximately 24 inches.

Step 2: Prepare Mounting Brackets

Separate the mounting brackets from the towel bar posts by loosening the set screws located on the underside of each post using the provided hex wrench. Keep the set screws and hex wrench in a safe place.

Шаг 3: Разметьте отверстия для сверления

Hold one mounting bracket against the wall at your marked location. Use a pencil to mark the positions for the two screw holes. Repeat this process for the second mounting bracket, ensuring it is level with the first and at the correct distance.

Шаг 4: Просверлите пилотные отверстия

Using a drill, create pilot holes at the marked locations. If drilling into a wall stud, use a smaller drill bit appropriate for the mounting screws. If drilling into drywall without a stud, use a drill bit sized for the wall anchors (typically 1/4 inch). Insert the wall anchors flush with the wall surface if required.

Step 5: Secure Mounting Brackets

Align each mounting bracket with its respective pilot holes (and anchors, if used). Secure the brackets to the wall using the provided mounting screws and a Phillips head screwdriver. Ensure the brackets are firmly attached and level.

Step 6: Attach Towel Bar Posts

Slide the towel bar posts over the secured mounting brackets. Ensure the set screw holes on the underside of the posts align with the brackets. The towel bar should be centered between the posts.

Step 7: Tighten Set Screws

Using the hex wrench, tighten the set screws on the underside of each post. Tighten until the posts are securely fastened to the mounting brackets and the towel bar does not wobble. Do not overtighten.

Инструкция по эксплуатации

The DELTA D75624SS towel bar is designed for holding towels and other lightweight bathroom textiles. Ensure items placed on the bar do not exceed its structural capacity. Avoid hanging heavy objects or using the bar as a grab handle.

Техническое обслуживание и уход

To maintain the finish and appearance of your towel bar, follow these cleaning guidelines:

Поиск неисправностей

If you encounter issues with your towel bar, refer to the following common solutions:

ПроблемаВозможная причинаРешение
Towel bar feels loose or wobbly.Set screws are not fully tightened, or mounting brackets are loose.Ensure the set screws on the underside of the posts are securely tightened with the hex wrench. Check if the mounting screws securing the brackets to the wall are tight. If wall anchors were used, ensure they are properly seated.
Царапины или повреждения покрытия.Использование абразивных чистящих средств или острых предметов.Avoid using abrasive materials for cleaning. Minor scratches may be polished with a non-abrasive metal polish suitable for stainless steel, if desired.

Технические характеристики

ОсобенностьДеталь
Номер моделиD75624SS
БрендДЕЛЬТА
МатериалЦинк
Тип отделкиНержавеющая сталь
ЦветНержавеющая сталь
Размеры продукта3.63 x 27.13 x 1.88 дюйма (глубина x ширина x высота)
Вес товара1.33 фунта
СКП034449896597

Гарантия и поддержка

This DELTA product is covered by the manufacturer's limited warranty. For specific warranty details, claims, or technical support, please refer to the official DELTA website or contact their customer service department directly. Keep your proof of purchase for warranty purposes.

DELTA Customer Support: