SIMPLEX 4903 9149

SIMPLEX 4903-9149 Динамик Стробоскоп 110CD Руководство по эксплуатации

1. Введение

This manual provides essential information for the proper installation, operation, and maintenance of the SIMPLEX 4903-9149 Speaker Strobe. This device is designed for fire alarm and emergency signaling applications, combining an audible speaker with a visible 110 candela strobe light. Please read this manual thoroughly before proceeding with installation or use to ensure safety and optimal performance.

2 Важная информация по безопасности

Adherence to the following safety guidelines is crucial for preventing injury, property damage, and ensuring the correct function of the device. Installation and servicing must be performed by qualified personnel only.

3. Продукт закончилсяview

The SIMPLEX 4903-9149 is a red, horizontal mount speaker strobe unit designed for clear audible and visible notification during emergency events. It features a speaker for voice messages or alarm tones and a high-intensity 110 candela strobe light for visual alerts.

SIMPLEX 4903-9149 Speaker Strobe, red rectangular unit with speaker grille and clear strobe lens on the right.

Figure 1: SIMPLEX 4903-9149 Speaker Strobe unit.

Основные характеристики:

4. Установка и настройка

This section outlines the general steps for installing the SIMPLEX 4903-9149 Speaker Strobe. Refer to the detailed installation sheets provided with the product for specific wiring diagrams and mounting templates.

4.1 Монтаж

  1. Выберите местоположение: Choose a suitable wall-mount location that meets local code requirements for visibility and audibility.
  2. Подготовьте монтажную поверхность: Ensure the mounting surface is clean, flat, and structurally sound to support the device.
  3. Install Back Box: Install the appropriate electrical back box (not included) according to manufacturer instructions and local codes.
  4. Монтировать устройство: Secure the speaker strobe unit to the back box using the provided hardware, ensuring a snug and stable fit. The device is designed for horizontal mounting.

4.2 Подключение

  1. Отключить питание: Before making any electrical connections, ensure that all power to the fire alarm control panel and associated circuits is disconnected.
  2. Маршрут проводки: Route the necessary 24VDC power and audio signal wiring to the back box.
  3. Подключите провода: Connect the field wiring to the terminal block on the speaker strobe unit according to the wiring diagram provided in the product's specific installation instructions. Pay close attention to polarity.
  4. Проверьте соединения: Double-check all wiring connections for correctness and secure termination.
  5. Восстановить мощность: Once all connections are verified and the device is securely mounted, restore power to the system.

5. Операция

The SIMPLEX 4903-9149 Speaker Strobe operates in conjunction with a compatible fire alarm control panel (FACP). Upon receiving an alarm signal from the FACP, the device will activate its audible speaker and visible strobe light simultaneously.

The device will continue to operate until the alarm condition is cleared and the FACP is reset.

6. Техническое обслуживание

Regular maintenance ensures the continued reliability and performance of your SIMPLEX 4903-9149 Speaker Strobe. All maintenance should be performed by qualified personnel.

7. Поиск Неисправностей

If the SIMPLEX 4903-9149 Speaker Strobe is not functioning as expected, refer to the following troubleshooting guide. For complex issues, contact a qualified fire alarm technician.

ПроблемаВозможная причинаРешение
Нет звука из динамика
  • Нет питания на устройстве
  • Неправильная проводка
  • Ошибка динамика
  • FACP programming issue
  • Verify 24VDC power supply
  • Check wiring connections and polarity
  • Test speaker with known good signal (by technician)
  • Consult FACP manual or technician
Strobe not flashing
  • Нет питания на устройстве
  • Неправильная проводка
  • Строб лamp вина
  • FACP programming issue
  • Verify 24VDC power supply
  • Check wiring connections and polarity
  • Replace device (by technician)
  • Consult FACP manual or technician
Прерывистый режим работы
  • Ослабленные соединения проводов
  • Колебания мощности
  • Неисправность устройства
  • Проверьте и закрепите все соединения проводки.
  • Проверьте стабильность электропитания
  • Replace device (by technician)

8. Технические характеристики

The following table provides key technical specifications for the SIMPLEX 4903-9149 Speaker Strobe.

СпецификацияДеталь
Номер модели4903 9149
БрендСИМПЛЕКС
ЦветКрасный
ФормаПрямоугольный
МатериалМеталл
Тип отделкиОкрашенный
Источник питанияBattery Powered (via FACP, not internal batteries)
Томtage24 Вольт (постоянный ток)
Тип крепленияНастенное крепление (горизонтальное)
Количество источников света1 (Strobe)
Вес товара2 фунта
СКП647358696716

9. Гарантия и поддержка

SIMPLEX products are manufactured to high-quality standards. For specific warranty information, please refer to the documentation provided with your purchase or contact your authorized SIMPLEX distributor. Any repairs or servicing must be performed by authorized personnel to maintain warranty validity.

For technical support, product inquiries, or to locate an authorized service provider, please contact your SIMPLEX supplier or visit the official SIMPLEX website. When contacting support, please have your product model number (4903-9149) and purchase details readily available.

Связанные документы - 4903 9149

Предварительноview Simplex 4090-9007 IDNet Signal IAM: адресный модуль для систем пожарной сигнализации
Подробные технические характеристики и функции индивидуально-адресного модуля сигнализации Simplex 4090-9007 IDNet (IAM), предназначенного для расширенной избирательной сигнализации и управления звуком в панелях управления пожарной сигнализацией Simplex серий 4100ES, 4010ES, 4100U и 4008. Включает информацию о подключении, эксплуатации и монтаже.
Предварительноview Панель управления пожарной сигнализацией Simplex 4004: Инструкция по установке и эксплуатации.
Подробное руководство по установке, эксплуатации и программированию панели управления пожарной сигнализацией Simplex 4004 (FACP), включая настройку системы.viewтребования, схема подключения, описание модулей и устранение неполадок.
Предварительноview Руководство по эксплуатации и принципу работы системы пожарной сигнализации Simplex 2001-8001
Подробное техническое руководство, объясняющее концепции, модули и конфигурации системы пожарной сигнализации Simplex 2001-8001, включая режимы работы без звукового сигнала, со звуковым сигналом, выборочной тревоги, кодированного и основного кодового режимов.
Предварительноview Пожарная сигнализация Simplex 4010: руководство по установке, эксплуатации и программированию
Полное руководство по системе пожарной сигнализации Simplex 4010, включающее инструкции по установке, эксплуатации и программированию. Включает в себя информацию по всей системе.view, подключение, настройка, диагностика и устранение неисправностей.
Предварительноview Руководство по установке и эксплуатации системы пожарной сигнализации Simplex 4004
Данное руководство содержит подробные инструкции по установке и эксплуатации панели управления пожарной сигнализацией Simplex 4004 (FACP). Оно охватывает все аспекты работы системы.viewВ комплект входят: требования, порядок установки, инструкция по эксплуатации, глоссарий терминов и информация о выборе батареи. Система пожарной сигнализации 4004 FACP представляет собой систему общего назначения с резервным питанием от батареи и электрическим контролем, предназначенную для обнаружения и оповещения о пожаре.
Предварительноview Пожарная сигнализация Simplex 4010: руководство по установке, эксплуатации и программированию
Полное руководство по установке, эксплуатации и программированию системы пожарной сигнализации Simplex 4010. Охватывает болееview, подключение, настройка, диагностика и устранение неисправностей.