Продукт болееview
The Simplex SJ156 Mechanical Screw Jack is a robust and reliable tool designed for various heavy-duty applications. Its sturdy and simple design makes it suitable for supporting machinery, construction tasks, structural moving, and general maintenance. Key features include a four-way head assembly for precise leveling and a serrated steel cap that floats 9 degrees on a chrome-moly ball, reducing friction and assisting in centering the load. This jack is engineered to support loads without creep-down and incorporates a welded stop to prevent accidental over-extension of the screw.
Рисунок 1: Simplex SJ156 Steel and Iron Screw Jack. This image shows the jack's green base, silver collar, and black serrated top, designed for stable load support.
Информация по безопасности
Always prioritize safety when operating the Simplex SJ156 Screw Jack. Failure to follow safety guidelines can result in serious injury or property damage.
- Ensure the jack is placed on a stable, level, and firm surface capable of supporting the load.
- Never exceed the jack's rated load capacity of 12 tons (24,000 pounds).
- Always center the load on the jack's cap to prevent slippage.
- Use appropriate cribbing or safety stands to support the load once it is lifted. Do not rely solely on the jack for prolonged support.
- Во время работы держите руки и ноги на расстоянии от движущихся частей.
- Перед каждым использованием осматривайте домкрат на наличие повреждений или износа. Не используйте домкрат, если он поврежден.
- Wear appropriate personal protective equipment (PPE), such as safety gloves and eye protection.
Настраивать
- Распаковка: Carefully remove the SJ156 screw jack from its packaging. Inspect for any visible shipping damage.
- Размещение: Position the jack on a flat, stable, and solid surface directly beneath the object to be lifted or supported. Ensure the ground can withstand the concentrated load.
- Load Centering: Place the object's lifting point directly onto the center of the jack's serrated steel cap. The floating cap is designed to assist in centering the load.
- Lever Bar Insertion: Insert a suitable lever bar (not included) into one of the four holes in the jack's head assembly. Choose the position that provides the best leverage and clearance for your application.
Инструкция по эксплуатации
Follow these steps for safe and effective operation of your Simplex SJ156 Screw Jack:
- Снятие бремени: With the lever bar inserted, rotate the head assembly clockwise to raise the screw and lift the load. Apply steady, controlled force.
- Снижение нагрузки: To lower the load, rotate the head assembly counter-clockwise. Lower the load slowly and in a controlled manner.
- Поддержка нагрузки: For prolonged support, always use additional safety stands or cribbing once the desired height is achieved. The jack is designed to hold the load without creep-down, but secondary support is crucial for safety.
- Over-extension Prevention: The jack includes a welded stop to prevent accidental over-extension of the screw. Do not attempt to force the screw beyond this stop.
Обслуживание
Regular maintenance ensures the longevity and safe operation of your SJ156 Screw Jack:
- Уборка: After each use, clean the jack to remove dirt, debris, and moisture.
- Смазка: Periodically apply a light coat of grease or oil to the screw threads and the floating cap mechanism to ensure smooth operation and prevent corrosion.
- Инспекция: Regularly inspect the jack for signs of wear, damage, or deformation, especially on the screw threads, head assembly, and base. Check for any cracks, bends, or excessive play.
- Хранилище: Store the jack in a clean, dry environment when not in use to prevent rust and damage.
- Ремонт: Do not attempt to repair damaged components yourself. Contact qualified service personnel or Simplex for repairs.
Поиск неисправностей
| Проблема | Возможная причина | Решение |
|---|---|---|
| Jack is difficult to operate or turn. | Lack of lubrication on screw threads; dirt or debris in mechanism. | Clean the screw threads and apply lubricant. Remove any visible debris. |
| Jack does not hold load or creeps down. | Exceeding load capacity; internal damage; worn components. | Ensure load is within 12-ton capacity. Discontinue use and have the jack inspected by a professional. |
| Unstable lifting. | Uneven surface; load not centered; damaged jack base. | Relocate jack to a firm, level surface. Re-center the load. Inspect jack for damage. |
Технические характеристики
| Атрибут | Ценить |
|---|---|
| Номер модели | SJ156 |
| Бренд | Симплекс |
| Грузоподъемность | 12 Tons (24,000 Pounds) |
| Минимальная высота | 3.75 дюйма |
| Размеры (Д x Ш x В) | 11 x 5 x 4 дюйма |
| Вес товара | 10 фунта |
| Цвет | Зеленый |
| СКП | 812761021541 |
| Производитель | Симплекс |
Гарантия и поддержка
For information regarding warranty coverage, technical support, or service for your Simplex SJ156 Screw Jack, please contact Simplex directly. Refer to the manufacturer's official website or product documentation for the most current contact information and warranty terms.
Примечание: This manual provides general guidelines. Always refer to the specific instructions provided by the manufacturer for detailed safety and operational procedures.
