Roth QuickStop Pro1 User Guide

Roth QuickStop Pro1 QuickGuide

QuickStop Pro1

WHAT DO I DO WHEN…?
We are home – set operating mode to HOME We are traveling – set operating mode to AWAY We are using a lot of water – set operating mode to PAUSE
WHAT SHOULD I DO ABOUT …?
WARNING – clear the warning and then check the cause.
ALARM – First check the cause. Ensure there is no visible leakage. Take action if needed. Turn the water back on by clearing the alarm.
Find the leak detection guide on www.Roth.Support/QuickStop_Pro_UK
In case of repeated alarms the cause must be carefully investigated.

1. The TEST indicator light flashes if the system is running a tightness test and keeps the light on while the device is monitoring flow.
2. The current operating mode lights up
   continuously = HOME
   flashes quickly = AWAY
   flashes slowly = PAUSE
3. Press MODE for toggling between HOME/AWAY mode.
   Keep the button pressed to go to PAUSE mode, in order to consume water for a longer time period without getting an alarm.
4. While the VALVE indicator is on, the valve is closed, and water cannot flow through it.
5. The NETWORK indicator turns off when the device is offline; flashes when the device is in pairing mode; and stays on when the device is online and connected to the Roth Cloud service.
6. Flashes on WARNING before the water is shut off. The lights are up continuously on ALARM and the water is shut off.
7. Press CLEAR briefly to silence the alarm sound. Keep it pressed to clear the alarm.

ROTH UK Ltd.
Phone +44 (0) 1984 623982 ·
E-mail: enquiries@roth-uk.com ·roth-uk.com