Roth Compact Highly Flexible Primer Installation Guide
Description
Roth Compact® Primer is cement based, fiber reinforced and very flexible primer. It guarantees good adhesion to Roth Compact® to an aluminum sheet when you want to cover the system with e.g. clinkers/ with tiles. It can also be used with other tile adhesives and self-leveling floor screeds. Roth Compact® primer hardens quickly and the next work steps can be started already after 3 hours.
Applications
The Roth Compact® primer was developed for the Roth Compact® system special product. It adheres well to aluminum and ensures a good adhesion surface between Roth Compact® sheets and the products connected to them. The lowest operating temperature and substrate temperature is +6°C
Preparation of the platform
The surface must be completely clean of loose particles, dust, grease, etc. Compact discs should be cleaned with a diluted ammonium chloride solution, mixing ratio 3 – 4 caps to 10 liters of water. The plates must dry completely before applying the primer.
Confusion
Take the primer bag from the bucket and pour clean water into the bucket. to 10 kilos Roth Compact® primer is added to 2.5 liters of water. Stir the mixture with a high-speed mixer (400 - 1,700 rpm) for about 2 minutes, until it is completely flat. The finished mixture must be used within 20 minutes. In cold weather, the Roth Compact® primer must be allowed to reach room temperature before mixing the water.
Diffusion
The Roth Compact® primer is poured directly onto the cleaned substrate. The mixture is applied precisely with a large and wide thin-pile paint roller An even and thin layer over the entire area of Roth Compact® boards. Using 1.0 - 1.5 kg/m2 a suitable leveling layer is obtained from the primer, which the thickness must not exceed 1 mm. The Roth Compact® primer must not be used to straighten the base or for forming pours!
Sufficiency
1 – 1.5 kg/m² (ie approx. 7 – 10 m² with one bucket).
Drying time (+18°C and 50% humidity)
The Roth Compact® primer must be allowed to dry for 3 hours before the following ones work steps.
NOTE! Drying must happen naturally (do not use a heat fan or similar), and good ventilation must be ensured.
Preservation Store in a dry place. Use within one year from date of manufacture. The date stamp is printed on the cover.
LVI number 2070664
More information:
Precautions and safety measures
The product contains cement, which can irritate the skin when mixed with water
and eyes, as well as the mucous membranes of the nose and throat. Read what is given on the package
warnings before starting work. More information can be found at
www.roth-fnland.f or by scanning the QR code.
Installations
Documents / Resources
 |
Roth Compact Highly Flexible Primer [pdf] Installation Guide Compact Highly Flexible Primer, Highly Flexible Primer, Primer |
