Rotel

ROTEL P5 Series 2 Stereo Control Amplifier

ROTEL-P5-Series-2-Stereo-Control-Amplifier

Specifications

  • Model: P5 Series 2
  • Power Output: Not specified
  • Inputs: Line-Out, MONO SUB-Ausgang, Preamp-Ausgang, Erdungsanschluss, 12-V-Triggersignal, USB POWER-Port, RS232, aptXTM HD Bluetooth, Netzeingang
  • Outputs: Not specified
  • Supported Connections: Plattenspieler, Subwoofer, Automatisierungssystem
Parameter Specification
Harmonic Distortion (20-20,000 Hz) < 0,002 %
Intermodulation Distortion (60 Hz: 7 kHz, 4:1) < 0,002 %
Phono Input Sensitivity/Impedance MM: 2,5 mV/47k Ohm, MC: 250 uV/100 Ohm
High Level Input Sensitivity/Impedance (Cinch) 160 mV/47k Ohm, (XLR) 250 mV/100k Ohm
Output Level High Level (Cinch) 1 V / 470 Ohm, Balanced (XLR) 2 V / 100 Ohm
Frequency Response Phono-Eingang 20 – 20,000 Hz, ±0,3dB, High Level Eingange 10 – 100,000 Hz, ±0,3dB
Channel Separation Bass: >80 dB, Treble: >116 dB
Signal to Noise Ratio (IHF A) Phono-Eingang >55 dB, High Level Eingange >85 dB
Power Requirements Europe: 230 V, 50 Hz, USA: 120 V, 60 Hz
Power Consumption Normal: 40 Watt, Standby: < 0,5 Watt, Network Standby: < 2 watts
Dimensions (W x H x D) 485 x 150 x 452 mm, Height Front Panel: 132 mm
Net Weight 22,9 kg

Product Usage Instructions

Safety Instructions:

Only authorized personnel should use the RS232 connection.

When making connections:

  • Turn off all components before hooking up or changing connections.
  • Turn the volume control down before turning the amplifier on or off.

Controls and Connections:
The product features several controls and connections:

  1. SOURCE-Regler: Source control
  2. Display: Display function
  3. VOLUME Drehregler: Volume control
  4. Fernbedienungssensor: Remote control sensor
  5. Power-Taste: Power button

To connect with a turntable:

  • Line-Out: Connect to a turntable
  • MONO SUB-Ausgang: Connect to a subwoofer
  • Preamp-Ausgang: Preamp output
  • Erdungsanschluss: Grounding connection

Integration with Automation System:
The product supports integration with an automation system via the RS232 connection and aptXTM HD Bluetooth.

Playable Audio Formats

  • aptX™ HD Bluetooth: Supports wireless streaming from compatible devices.
  • PC-USB: Supports PCM up to 32bit/384kHz, DSD (DoP), MQA and MQA Studio, and is Roon Tested.
  • Coaxial/Optical: Supports SPDIF LPCM up to 192 kHz/24 Bit.

Troubleshooting

  • If the POWER LED does not light up, check the power supply and connections.
  • In case of no sound, ensure signal sources are properly connected and the amplifier is not muted.
  • If Bluetooth pairing is not possible, ensure the device is compatible and within range.

Contact Information

For further assistance, contact the Michi support team through the relevant regional office:

  • Rotel Global Office (Hong Kong)
  • Rotel USA (Maple Grove, MN)
  • Rotel Canada (Pickering, ON)

Additional details can be found at www.michi-hifi.com.

Rotel Global Office Room 1903, 19/F., Dominion Center 43-59 Queen’s Road East Wanchai Hong Kong Tel: 852 2793 9378 Fax: 852 3583 5035 Rotel USA 11763 95th Avenue North Maple Grove, MN 55369 USA Phone: +1 510-843-4500 Rotel Canada Kevro International 902 McKay Rd. Suite 4 Pickering, ON L1W 3X8 Canada Phone: +1 905-428-2800 www.michi-hifi.com
Michi P5 Series 2 Owner’s Manual Ver P 081523 Deutsch

FAQ

Can the P5 Series 2 be connected to a computer?

Yes, the P5 Series 2 supports connection to a computer via the USB POWER-Port.

How to dim the front display?

Use the DISPLAY-Taste button to dim the front display.

How do I update the software of the Michi P5 Series 2?

Updates can be performed via the USB port on the rear panel using a USB flash drive.

What is the function of the RS232 port?

The RS232 port is designed for integration into automation systems.

How do I configure network settings?

Network settings can be configured through the on-screen display (OSD) using the remote control.

What audio settings are available in the system configuration?

Options include Bluetooth LED, Power On Max Volume, PC-USB Option, PC-USB Decoding, and Phono Stage.

What should I do if I encounter a malfunction?

Consult the troubleshooting section in the owner's manual, and if necessary, contact Michi support or an authorized dealer.

Documents / Resources

ROTEL P5 Series 2 Stereo Control Amplifier [pdf] Owner's Manual
P5 Series 2 Stereo Control Amplifier, P5 Series 2, Stereo Control Amplifier, Control Amplifier, Amplifier

References

Leave a comment

Your email address will not be published. Required fields are marked *