Rotary Switch BS002 PWM Mini LED Dimmer Knob Switch
Functions
| Model | BS002 |
| Operation | ON / OFF + dimming function and 0V memory. |
| Input Voltage | 12V–24V DC |
| Output Voltage | 12V–24V DC |
| Input Current | 4A |
| Input and output cable length | 30cm (length can be ordered) |
| Load Around | 48W for 12V, and 96W for 24V |
| Waterproof | IP65 |
Connection Diagram
Operations
The Knob Controller functions as follow:
- The initial state is off when turn on the power.
- Press the knob to switch the light ON / OFF status.
- The brightness of the led lamp can be adjusted by rotating the knob under the on state of opening (the clockwise brightness increases and the counterclock brightness decreases).
- This sensor will memorize the status of the dimming in DC0V(④ power off) or DC12V-24V.
Installation Steps
Note: Please read the tag on the wire when connecting cables; The function/program can be customized, made upon different needs.
Documents / Resources
 |
Rotary Switch BS002 PWM Mini LED Dimmer Knob Switch [pdf] Owner's Manual BS002 PWM Mini LED Dimmer Knob Switch, BS002, PWM Mini LED Dimmer Knob Switch, Mini LED Dimmer Knob Switch, LED Dimmer Knob Switch, Dimmer Knob Switch, Knob Switch, Switch |