ROGA-Instruments DAQ2 NVH Data Acquisition and Analysis
Important Information
RogaDAQ 2 is a portable NVH data acquisition device. It has two high-quality, simultaneous switchable IEPE sensor inputs.
ROGA offers a wide range of data acquisition systems specifically designed for the monitoring and measurement of sound and vibration.
RogaDAQ2 Set is a strong package with dual-channel USB based data acquisition hardware and extensive soft ware that enables precise and efficient data analysis.
In combination with a standard notebook and an IEPE sensor, the RogaDAQ2 set becomes a portable vibration analysis laboratory with integrated tools for signal processing and visualization of the vibration data.
Specifications
| Analog Inputs | 2 BNC inputs |
| Simultaneous sampling | 2 ADC |
| ADC Resolution | 24 Bit |
| Sampling rate | 48 kHz |
| Measuring range | 10 Volt |
| Pairing selectable | AC-DC-IEPE |
| IEPE Sensor Power | 21 Volt @ 4 mA |
| Self-adjusting | Anti-aliasing filter |
| Accuracy better | ± 0.1 dB |
| Dynamic range | > 124 dB (FFT-based) |
| Frequency response | DC up to 24 kHz |
| Frequency response with IEPE | 0.3 Hz to 24 |
| Dimensions | 85(W) x 132(D) x 35(H) mm |
| Weight | 200 grams |
Customer Support
ROGA-Instruments, Im Hasenacker 56, D-56412Nentershausen
Phone: +49 6485 8815803E-Mail info@roga-instruments.com
INTELLIGENT TESTING EQUIPMENT
www.roga-instruments.com
Documents / Resources
 |
ROGA-Instruments DAQ2 NVH Data Acquisition and Analysis [pdf] Owner's Manual RogaDAQ2, DAQ2 NVH Data Acquisition and Analysis, NVH Data Acquisition and Analysis, Acquisition and Analysis, Analysis |
