SMALLRIG Module Top Handle 5236 for DJI Focus Pro LiDAR

1. Produs terminatview

The SMALLRIG Module Top Handle 5236 is specifically designed to enhance the focusing experience with the DJI Focus Pro LiDAR system. It features an integrated telescoping rail for precise LiDAR module positioning, a built-in measuring scale for calibration, and multiple mounting options for accessories. This handle also functions as a standard top handle when the LiDAR system is not in use.

Imaginea 1.1: Pesteview of the SMALLRIG Module Top Handle 5236.

2. Conținutul pachetului

Verificați dacă toate componentele sunt prezente în pachet:

• Mâner superior x 1
• Locking Knob x 1
• Spălător x 1
• Cheie Allen x 1
• Mounting Bracket for DJI Focus Pro LiDAR x 1
• Instrucțiuni de utilizare x 1

Image 2.1: Visual representation of the package contents and product specifications.

3. Instrucțiuni de configurare

3.1 Attaching the Top Handle to Your Camera Rig

1. Identify the 3/8"-16 ARRI locating holes or 1/4"-20 threaded holes on your camera cage or rig.
2. Align the base of the SMALLRIG Top Handle with the desired mounting points.
3. Secure the handle using the provided locking knob and washer. Ensure it is tightened firmly with the Allen wrench to prevent any wobble.

3.2 Mounting the DJI Focus Pro LiDAR Module

1. Attach the dedicated mounting bracket for the DJI Focus Pro LiDAR to the telescoping rail system on the top handle.
2. Slide the DJI Focus Pro LiDAR module into the mounting bracket.
3. Use the telescoping rail to adjust the LiDAR module's vertical and horizontal position. The goal is to position the LiDAR as close to the front of the lens as possible to minimize parallax and optimize autofocus accuracy.

Image 3.1: The top handle customized for DJI Focus Pro LiDAR to enhance focusing.

Image 3.2: The telescoping module allows for quick installation and adjustment of the LiDAR module.

4. Instrucțiuni de utilizare

4.1 Using the Telescoping Module

The telescoping rail system allows for fine-tuning the position of the DJI Focus Pro LiDAR module. Loosen the locking knob on the rail, adjust the LiDAR module to the desired vertical and horizontal position, and then re-tighten the knob to secure it. This adjustment helps in achieving optimal focus accuracy by minimizing the distance between the LiDAR and the lens.

4.2 Utilizing the Integrated Measuring Scale

A 23cm / 9.05in measuring scale is integrated into the handle. This scale provides direct distance measurements between the LiDAR glass plane and the camera's focal plane. Use this scale during calibration to ensure precise distance readings for your focusing system.

Image 4.1: The integrated measuring scale provides instant distance data for calibration.

4.3 Opțiuni de montare a accesoriilor

The top handle features multiple mounting points for various accessories:

• Suporturi pentru patina rece: Two cold shoe mounts (front and rear) allow for attaching microphones, video lights, or monitors.
• Găuri de localizare ARRI: These holes enable the attachment of monitor mounts (e.g., SMALLRIG ID: 2903B) for expanding your monitoring setup.
• Găuri filetate de 1/4"-20: Multiple 1/4"-20 threaded holes and locating holes are available for attaching articulating arms (e.g., SMALLRIG ID 4194, 4900) or other compatible accessories.

Image 4.2: Various mounting options including cold shoes, 1/4"-20 threads, and ARRI locating holes.

Imaginea 4.3: Examples of expanded accessories like monitor mounts and magic arms.

4.4 Modular Functionality

When the DJI Focus Pro LiDAR system is not required, the handle can be used as a conventional top handle, providing a comfortable and secure grip for camera operation. The ergonomic design includes embedded silicone for anti-slip and cold-resistant performance.

Image 4.4: The handle can be used with the Focus Pro LiDAR or as a standard top handle.

Image 4.5: Dimensions and ergonomic features of the handle, highlighting the comfortable grip.

5. Întreținere

To ensure the longevity and optimal performance of your SMALLRIG Module Top Handle, follow these maintenance guidelines:

• curatenie: Wipe the handle and its components with a soft, dry cloth after each use to remove dust and debris. For stubborn dirt, use a slightly damp o lavetă și apoi uscați bine. Evitați substanțele chimice dure sau materialele abrazive.
• Depozitare: Store the handle in a clean, dry environment away from extreme temperatures and humidity.
• Inspecţie: Periodically check all screws and connections for tightness. Re-tighten as necessary using the provided Allen wrench.

6. Depanare

6.1 Handle Wobble After Installation

If the handle exhibits wobble even after finger-tightening:

• Ensure the locking knob is fully engaged and tightened with the Allen wrench.
• Verify that the mounting holes on your camera rig are compatible with the handle's 3/8"-16 ARRI locating pins or 1/4"-20 threads. Slight variations in manufacturing tolerances between different brands or even within the same brand's product lines can sometimes lead to a less-than-perfect fit.
• Consider using a NATO clamp adapter if your rig supports it, to provide a quick-release and potentially more secure mounting solution.

6.2 LiDAR Module Not Adjusting Smoothly

If the LiDAR module does not slide smoothly on the telescoping rail:

• Ensure the locking knob for the telescoping rail is fully loosened.
• Check for any debris or obstructions on the rail. Clean if necessary.

7. Specificații

8. Garanție și asistență

SMALLRIG products are manufactured to high-quality standards. For warranty information, please refer to the official SMALLRIG website or contact your local distributor. For technical support or inquiries, please reach out to SMALLRIG customer service through their official channels.

Oficial Website: www.smallrig.com