ASRock Steel Legend SL-850G 850W Power Supply Instruction Manual

1. Introducere

This manual provides detailed instructions for the installation, operation, and maintenance of your ASRock Steel Legend SL-850G 850W Full Modular Power Supply. Please read this manual thoroughly before installation to ensure proper setup and safe operation. This power supply unit (PSU) is designed to deliver stable and efficient power to your personal computer system.

2. Caracteristici cheie

• Certificat 80 PLUS Gold: Ensures high power efficiency, reducing heat generation and operating costs.
• Cybenetics Platinum and LAMBDA A+ Certified: Guarantees superior efficiency and quiet operation.
• ATX3.1 & PCIe5.1 Ready: Fully compliant with the latest ATX 3.1 and PCIe 5.1 standards, including native 12V-2x6 cable support for modern graphics cards.
• Fully Modular Cable Design: Allows for cleaner cable management and improved airflow by connecting only the necessary cables.
• 100% Highly Reliable Japanese Capacitors: Utilizes high-quality Japanese capacitors rated for 105°C, ensuring long-term stability and durability.
• iCool Intelligent Fan Control Mode: Optimizes fan speed based on load and temperature, providing quiet operation at low to medium loads.
• Built-in 5V BOOST Function: Provides stable 5V power delivery.
• 135mm Striped Axial FDB Fan: Features a Fluid Dynamic Bearing (FDB) fan for quiet operation and extended lifespan.

3. Conținutul pachetului

Verificați dacă toate articolele sunt prezente în pachet înainte de a continua instalarea.

Image: Contents of the ASRock Steel Legend SL-850G Power Supply package.

• ASRock Steel Legend SL-850G Power Supply Unit
• Cablu de alimentare CA.
• Modular Cable Set (MB 24-Pin, CPU 4+4 Pin, PCIe 12V-2x6, PCIe 6+2 Pin, SATA, PATA)
• Ghid de instalare / Manual de utilizare
• ATX 24-Pin PSU Tester
• Geanta pentru cablu
• Legături pentru cabluri cu velcro
• Legături pentru cabluri
• Șuruburi de montare

Image: Detailed diagram of included modular cables and their lengths.

4. Configurare și instalare

Proper installation is crucial for the performance and longevity of your power supply. Always ensure your system is powered off and unplugged from the wall outlet before installation.

4.1 Măsuri de siguranță

• Disconnect the AC power cord from the wall outlet before handling the PSU or any internal components.
• Asigurați o împământare corespunzătoare pentru a preveni descărcarea electrostatică (ESD).
• Nu deschideți sursa de alimentare.asing. Volum ridicattagsunt prezente în interior, chiar și atunci când este deconectat de la priză.

4.2 Instalare fizică

1. Mount the PSU into the designated power supply bay in your computer case. Ensure the fan is facing the correct direction for optimal airflow (usually facing down if there's a bottom vent, or up if it's a top-mounted PSU).
2. Fixați sursa de alimentare pe carcasă folosind șuruburile de montare furnizate.

4.3 Conexiuni prin cablu

Connect only the necessary modular cables to your components. This improves cable management and airflow within your case.

Imagine: Laterală view of the power supply with modular cable connections clearly labeled.

• Alimentare placă de bază: Connect the 24-pin ATX cable to your motherboard.
• Putere CPU: Connect the 4+4-pin EPS/ATX12V cable(s) to your motherboard's CPU power connector(s).
• PCIe Power (Graphics Cards): For modern graphics cards requiring a 12V-2x6 connector, use the dedicated cable. Ensure the connector is fully seated. For other graphics cards, use the 6+2-pin PCIe cables.

Image: Proper connection of the PCIe 12V-2x6 cable, highlighting the importance of full insertion.

• Putere SATA: Connect SATA power cables to your storage drives (SSDs, HDDs) and other SATA-powered devices.
• PATA Power (Molex): Connect PATA power cables to older peripherals or case fans if needed.

After connecting all necessary internal cables, connect the AC power cord to the PSU and then to a wall outlet.

5. Instrucțiuni de utilizare

5.1 Pornire/Oprire

1. Asigurați-vă că toate cablurile sunt bine conectate.
2. Flip the main power switch on the back of the PSU to the 'I' (On) position.
3. Power on your computer system via the case power button.
4. To power off, shut down your operating system normally, then flip the main power switch on the PSU to the 'O' (Off) position.

Image: Rear panel of the power supply, indicating the main power switch and iCool fan control switch.

5.2 iCool Intelligent Fan Control

The ASRock Steel Legend SL-850G features an iCool switch on the rear panel. This switch controls the fan's operation mode:

• iCool ON: The fan will remain off at low to medium loads for silent operation. It will activate automatically when the load or temperature increases.
• iCool OFF: The fan will operate continuously, regardless of the load or temperature. This provides maximum cooling but may result in higher noise levels.

Choose the mode that best suits your preference for noise and cooling performance.

Image: iCool Mode Curve Diagram, showing fan noise levels versus load percentage.

6. Întreținere

Întreținerea regulată ajută la asigurarea longevității și a performanței optime a sursei de alimentare.

• curatenie: Periodically clean the exterior of the PSU and its fan grille to prevent dust buildup. Use compressed air to gently clear dust from the fan blades and heatsinks. Ensure the system is powered off and unplugged before cleaning.
• Organizare de cabluri: Ensure cables are neatly routed and do not obstruct airflow within the case.
• Mediu: Operate the PSU in a well-ventilated area, away from excessive heat, humidity, and direct sunlight.

7. Depanare

If you encounter issues with your power supply, try the following troubleshooting steps:

• Fără putere:
  • Verificați dacă cablul de alimentare CA este conectat corect atât la sursa de alimentare, cât și la priza de perete.
  • Ensure the main power switch on the PSU is in the 'I' (On) position.
  • Verificați dacă priza de perete funcționează conectând un alt dispozitiv.
  • Use the included 24-pin PSU tester to check if the PSU powers on independently.
• Instabilitate a sistemului/Opriri aleatorii:
  • Ensure all modular cables, especially the 12V-2x6 PCIe cable, are fully seated and properly connected.
  • Check for any loose connections to the motherboard, CPU, or graphics card.
  • Verify that your system's power requirements do not exceed the PSU's 850W capacity.
• Fan Not Spinning (iCool ON):
  • If iCool mode is ON, the fan may not spin at low loads. This is normal operation.
  • If the fan does not spin even under load, try switching iCool mode OFF to force continuous fan operation. If it still doesn't spin, contact support.
• Zgomote neobișnuite:
  • Ensure no cables are obstructing the fan.
  • If the noise persists and is not related to fan operation, contact support.

Dacă acești pași nu rezolvă problema, vă rugăm să consultați secțiunea Garanție și asistență pentru asistență suplimentară.

8. Specificații

9. Garanție și asistență

The ASRock Steel Legend SL-850G Power Supply comes with a remarkable 10 ani garanție, covering defects in materials and workmanship under normal use. For warranty claims or technical support, please contact ASRock customer service through their official website-ul sau informațiile de contact furnizate pe ambalajul produsului.

For the latest drivers, FAQs, and support resources, visit the official ASRock website: www.asrock.com

10. Videoclipuri cu produse