Roborock F25 LT Wet Dry Vacuum Cleaner and Mop Instruction Manual

1. Introducere

The Roborock F25 LT is an advanced wet and dry vacuum cleaner and mop designed for comprehensive hard floor cleaning. This all-in-one device combines powerful vacuuming with efficient mopping, featuring a 20,000 Pa suction power to tackle various messes. Key functionalities include a 194°F (90°C) high-temperature self-cleaning system for the roller brush, hot air flash drying, and a 180° lie-flat design for reaching under furniture. It also offers edge-to-edge cleaning within 1 mm of baseboards and a dual-scraper system to prevent hair tangles and streaks. The F25 LT is equipped with a long-lasting battery for extended cleaning sessions, ensuring your home remains spotless with minimal effort.

2. Configurare

2.1 Despachetare și asamblare

Carefully remove all components from the packaging. The main unit, handle, charging dock, and accessories are securely packed. Insert the handle into the top of the main vacuum cleaner unit until it clicks into place. Position the charging dock against a wall near a power outlet.

Image: All components of the Roborock F25 LT, including the main vacuum unit, handle, charging dock, roller brush, filter, detergent, and user manual, are laid out on a wooden floor after unboxing.

2.2 Power Connection and Charging Dock

Connect the power cable to the charging dock and plug it into a standard wall outlet. Ensure the cable is neatly stored in the designated slot on the back of the charging dock to prevent tripping hazards. Place the vacuum cleaner onto the charging dock to begin charging. The display on the vacuum will indicate charging status.

2.3 Umplerea rezervorului de apă curată

Before first use, remove the clean water tank from the main unit. Fill the tank with tap water up to the indicated line. For enhanced cleaning, add approximately 1/4 of a bottle cap of Roborock detergent into the designated detergent compartment. For F25 ACE and F25 ALT models, detergent can be added to the detergent cartridge for automatic dispensing.

Video: This official Roborock video demonstrates the assembly of the F25 series vacuum, including handle insertion, charging dock setup, and how to fill the clean water tank with water and detergent before use.

3. Utilizarea aspiratorului

3.1 Pornirea și oprirea

To start the vacuum, tilt the unit back and press the Power button on the handle. Press the Power button again to pause or turn off the vacuum.

3.2 moduri de curățare

The Roborock F25 LT offers four distinct cleaning modes to suit various cleaning needs:

• Mod Eco: Pentru curățare ușoară și durată extinsă de viață a bateriei.
• Mod burete: Pentru damp ştergerea.
• Mod auto: Automatically adjusts suction and water flow based on detected dirt levels.
• Mod maxim: Provides maximum suction power for heavy-duty cleaning.

Press and hold the Change Mode button on the handle to switch between these modes.

Image: A visual representation of the four cleaning modes available on the Roborock F25 LT, showing different levels of dirt and corresponding mode icons.

3.3 Funcții avansate de curățare

• Design FlatReach la 180°: The vacuum can lie completely flat, allowing it to effortlessly clean under low furniture such as beds, couches, and cabinets without sacrificing suction power.
• Curățare de la margine la margine: Designed to clean within 1 mm of baseboards, staircases, and furniture, ensuring no spots are missed.
• Effortless Maneuverability: A 70-degree flexible head and strategically positioned water tank provide optimal balance and powerful forward traction, making it easy to glide across all hard floor types.
• Dual-Scrapers Zero Tangle Design: Innovative dual-scrapers and shark-tooth blades prevent hair tangles on the roller brush and ensure streak-free cleaning.

Image: The Roborock F25 LT is shown lying flat at a 180-degree angle, illustrating its ability to reach under low furniture with its 4.92-inch thickness while maintaining 20,000Pa suction.

Image: The Roborock F25 LT is shown cleaning along a wall, highlighting its triple-edge full-coverage cleaning capability, reaching within 0.03 inches of edges.

3.4 Battery Life and Voice Alerts

The high-quality soft-pack battery provides up to 60 minutes of runtime, allowing you to clean up to 4413 sq ft on a single charge in Eco mode. The device provides timely voice alerts for updates and notifications, such as when to empty the dirty water tank or when the cleaning rollers are active.

Image: An illustration highlights the upgraded soft-pack battery of the Roborock F25 LT, emphasizing its long-lasting power for up to 60 minutes of runtime and coverage of up to 4413 sq ft.

4. Întreținere

4.1 Autocurățare și uscare

After each use, place the vacuum cleaner back on its charging dock. Press the Self-Clean button on the handle to initiate the self-cleaning cycle. The 194°F (90°C) high-temperature self-washing feature effectively dissolves stubborn dirt and grease from the roller brush. Following the wash, the hot air flash drying system dries the roller brush, preventing odors and ensuring it's ready for the next use. You can choose between a rapid 5-minute drying mode or a quiet 30-minute option.

Image: A visual breakdown of the Roborock F25 LT's self-cleaning process, showing the 194°F high-temperature self-washing and the subsequent hot air flash drying of the roller brush.

4.2 Golirea rezervorului de apă murdară

The dirty water tank should be emptied after each cleaning session. Follow the voice prompts from the device to remove and empty the tank. The tank is designed for easy removal and cleaning.

4.3 Întreținerea filtrului

The F25 LT features a washable filter. Regularly remove and clean the filter according to the user manual to maintain optimal suction performance. Ensure the filter is completely dry before reinserting it into the dirty water tank.

5. Depanare

If you encounter any issues with your Roborock F25 LT, please refer to the following common troubleshooting steps:

• Fără putere: Ensure the device is properly charged and the power button is pressed firmly. Check the charging dock connection.
• Sucțiune slabă: Check if the dirty water tank is full or if the clean water tank is empty. Clean the roller brush and filter for any blockages.
• Dungi pe podea: Ensure the roller brush is clean and properly installed. Verify that the correct amount of detergent is used.
• Zgomot neobișnuit: Inspect the roller brush area for any foreign objects or debris that might be causing obstruction.

For more detailed troubleshooting, consult the full user manual or contact customer support.

6. Specificații

7. Garanție și asistență

Your Roborock F25 LT Wet Dry Vacuum Cleaner and Mop comes with a standard manufacturer's warranty. For detailed information regarding warranty coverage, terms, and conditions, please refer to the warranty card included in your product packaging or visit the official Roborock website-ul.

For technical support, troubleshooting assistance, or to order replacement parts, please contact Roborock customer service. Contact information can be found in your user manual or on the official Roborock support page.