1. Introducere
The PGST Wireless Motion Detector Sensor (Model PA-92) is an integral component of the PGST Home Security System, designed to enhance the security of your premises by detecting unauthorized movement. This sensor provides reliable motion detection within its specified range and field of view, contributing to a comprehensive and effective security solution. It is essential to note that this motion sensor requires a compatible PGST alarm host for full functionality.
Imaginea 1: Față view of the PGST Wireless Motion Detector Sensor.
2. Caracteristicile produsului
- All-Day Protection: Designed to detect motion within a range of up to 25 feet.
- Câmp larg de View: Oferă un câmp de 110 de grade view to cover a significant area.
- Instalare ușoară: Can be installed conveniently using the supplied bracket.
- Compatibilitate: Exclusively compatible with the PGST home security system and requires a PGST alarm host for operation.
3. Conținutul pachetului
Vă rugăm să verificați dacă toate articolele sunt prezente și în stare bună la deschiderea coletului.
- 1 x PGST Wireless Motion Detector Sensor (Model PA-92)
- 1 x suport de montare
- 1 x Lithium Ion Battery (pre-installed or included separately)
- Șuruburi de montare și dibluri de perete
- Manual de utilizare (acest document)
4. Configurare și instalare
Proper installation is crucial for optimal performance of the motion sensor.
4.1. Selectarea locației
- Install the motion sensor in a corner of the room for maximum coverage.
- Position the sensor at least 1.5 meters (approximately 5 feet) off the ground. This height helps ensure effective detection and minimizes false alarms from pets or small objects.
- Avoid placing the sensor directly facing windows, heat sources (e.g., radiators, vents), or areas with direct sunlight, as these can interfere with detection.
4.2. Montarea senzorului
- Identify the desired mounting location based on the guidelines above.
- Use the supplied mounting bracket as a template to mark the screw holes on the wall.
- Drill pilot holes if necessary, and insert wall plugs if mounting into drywall or masonry.
- Fixați suportul de montare pe perete folosind șuruburile furnizate.
- Attach the motion sensor to the mounted bracket, ensuring it clicks securely into place.
4.3. Instalarea bateriei (dacă nu este preinstalată)
The sensor requires one Lithium Ion battery (included).
- Open the battery compartment cover, usually located on the back or side of the sensor.
- Insert the Lithium Ion battery, observing the correct polarity (+ and -).
- Închideți bine capacul compartimentului bateriei.
4.4. Pairing with PGST Alarm Host
This motion sensor must be paired with a compatible PGST alarm host. Refer to your PGST alarm host's user manual for specific instructions on how to add new wireless sensors. Generally, this involves putting the alarm host into pairing mode and then triggering the motion sensor to register it with the system.
5. Instrucțiuni de utilizare
Once installed and paired, the motion sensor operates automatically as part of your PGST alarm system.
- Detectare: When the alarm system is armed, the motion sensor will detect movement within its 25-foot range and 110-degree field of view.
- Declanșare alarmă: Upon detecting motion, the sensor will transmit a signal to the PGST alarm host, which will then trigger the alarm according to your system's settings (e.g., sounding a siren, sending notifications).
- Indicator luminos: The sensor may have an indicator light that flashes briefly upon detection or during pairing mode. Refer to your alarm host manual for specific sensor indicator behaviors.
6. Întreținere
Regular maintenance ensures the longevity and reliable operation of your motion sensor.
- curatenie: Periodically wipe the sensor's lens and casing with a soft, dry cloth to remove dust and debris. Do not use abrasive cleaners or solvents.
- Înlocuire baterie: The sensor is powered by a Lithium Ion battery. When the battery level is low, your PGST alarm host may indicate a low battery warning for the sensor. Replace the battery promptly to ensure continuous protection. Use only the specified battery type.
- Testare: Regularly test the motion sensor by arming your system and walking into the sensor's detection area to confirm it triggers the alarm.
7. Depanare
If you encounter issues with your motion sensor, refer to the following common problems and solutions.
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Senzorul nu detectează mișcare. |
|
|
| Alarme false. |
|
|
| Sensor not communicating with alarm host. |
|
|
8. Specificații
| Atribut | Detaliu |
|---|---|
| Marca | PGST |
| Numărul de model | PA-92 |
| Culoare | Alb |
| Sursa de alimentare | Alimentat cu baterie |
| Tip baterie | 1 baterie litiu-ion (inclusă) |
| Interval maxim de detectare | 25 de picioare (aproximativ 7.6 metri) |
| Câmpul de View | 110 de grade |
| Tip de montare | Protruding (Screw-In) |
| Material | Plastic |
| Greutatea articolului | 2.39 uncii (aproximativ 67.7 grame) |
| Dimensiuni produs (L x l x H) | 1.4 x 1.2 x 1.22 inci (aprox. 3.56 x 3.05 x 3.1 cm) |
| Utilizări recomandate | De interior |
| Dispozitive compatibile | PGST alarm system (requires PGST alarm host) |
9. Informații de siguranță
- Do not attempt to disassemble or modify the sensor. This may void the warranty and cause damage.
- Țineți dispozitivul departe de apă și umiditate excesivă.
- Ensure proper battery disposal according to local regulations.
- Acest dispozitiv este destinat exclusiv utilizării în interior.
10. Garanție și asistență
For warranty information and technical support, please refer to the documentation provided with your PGST alarm host or visit the official PGST website. PGST is committed to providing reliable security solutions and customer satisfaction.
Image 2: PGST Brand Logo.
