Manual de utilizare pentru senzorul de ușă și fereastră PGST PB-68

Introducere

The PGST PB-68 Door and Window Sensor is a crucial component of your PGST Home Security System, designed to detect unauthorized entry through doors and windows. This sensor operates by detecting the separation of its two main parts, triggering an alarm signal to your connected PGST alarm host and sending notifications to your smartphone. It provides real-time monitoring and enhances the security of your home or property.

Important: This sensor requires a PGST alarm host to function correctly and is compatible only with the PGST home security system.

Conținutul pachetului

1 x PGST PB-68 Door and Window Sensor (main unit and magnetic contact)
1 x Lithium Ion Battery (pre-installed)
1 x Double-sided Adhesive Tape for installation

Înființat

Cerințe de instalare

A functional PGST alarm host (required for operation).
A clean, dry surface for mounting the sensor.

Etape de instalare

Pregătiți suprafața: Clean the desired mounting area on your door or window frame and the corresponding moving part (door/window) to ensure proper adhesion.
Atașați bandă adezivă: Apply the provided double-sided adhesive tape to the back of both the main sensor unit and the magnetic contact.
Montați unitatea principală: Mount the larger sensor unit onto the fixed frame of the door or window.
Montați contactul magnetic: Mount the smaller magnetic contact onto the moving part of the door or window (the door itself or the window sash).
Aliniați componentele: Ensure that the main sensor unit and the magnetic contact are aligned horizontally and are less than 10 mm (approximately 0.4 inches) apart when the door or window is closed. Proper alignment is critical for correct operation.
Instalare de testare: Open and close the door or window several times to verify that the sensor triggers and resets correctly. Confirm that your PGST alarm host registers the sensor's status changes.

PGST PB-68 Door and Window Sensor components, showing the main sensor unit and the magnetic contact. — This image displays the two main components of the PGST PB-68 Door and Window Sensor: the larger sensor unit and the smaller magnetic contact. These two parts are designed to be mounted adjacent to each other on a door or window frame, with a small gap between them when the door/window is closed.

Instrucțiuni de operare

Funcționalitate

Detectare: When the door or window to which the sensor is attached is opened, the main sensor unit and the magnetic contact separate. This separation triggers the sensor.
Declanșare alarmă: Upon being triggered, the sensor sends a signal to your connected PGST alarm host. The alarm host will then activate its siren (if armed) and initiate any programmed actions, such as sending notifications.
Monitorizare în timp real: Through the PGST application on your smartphone, you can monitor the real-time status of your doors and windows (open or closed) 24 hours a day, 7 days a week. You will receive alarm signals on your mobile phone within seconds of a trigger event.

Pairing with PGST Alarm System

Refer to your PGST alarm host's user manual for specific instructions on how to add new sensors to the system. Generally, this involves putting the alarm host into pairing mode and then triggering the sensor (e.g., by separating its two parts) to register it with the system. The process is typically managed through the PGST mobile application.

Întreţinere

Înlocuirea bateriei

The PGST PB-68 sensor comes with a pre-installed Lithium Ion battery. When the battery level is low, your PGST alarm host or mobile application will typically notify you. To replace the battery:

Carefully detach the main sensor unit from its mounting surface.
Open the battery compartment (refer to the sensor's casing for specific opening mechanism, usually a small latch or screw).
Remove the old Lithium Ion battery.
Insert a new 3.7V Lithium Ion battery, ensuring correct polarity.
Închideți compartimentul bateriei și montați la loc senzorul.
Test the sensor to ensure it is functioning correctly with the alarm system.

Curatenie

Wipe the sensor's exterior with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these can damage the device.

Depanare

Problemă	Cauza posibila	Soluţie
Sensor not triggering alarm.	Incorrect alignment of sensor and magnet. Sensor not paired with alarm host. Baterie descărcată sau descărcată. Alarm system not armed.	Ensure the gap between the sensor and magnet is less than 10 mm when closed. Refer to your alarm host manual to pair the sensor. Înlocuiți bateria. Arm your PGST alarm system.
Fără notificări pe smartphone.	Senzorul nu se declanșează. Smartphone app not configured for notifications. Internet connection issues with alarm host or smartphone.	Troubleshoot sensor triggering (see above). Check app settings for notification permissions and preferences. Verify internet connectivity for both your alarm host and smartphone.
Sensor frequently triggers falsely.	Sensor and magnet too far apart or loose. Vibrations or movement causing slight separation.	Re-align and re-secure the sensor and magnet, ensuring a firm attachment. Consider a more stable mounting location if possible.

Specificații

Numărul de model	PB-68
Tehnologia senzorilor	Senzor de contact
Sursa de alimentare	Alimentat cu baterie
Tip baterie	1 x Litiu-ion (inclusă)
Voltage	3.7 volți (DC)
Material	Plastic
Metoda de instalare	Autoadeziv
Tip de montare	Ieșind
Dimensiunile produsului	2.95 x 1.96 x 2.16 inci
Greutatea articolului	1.44 uncii
Dispozitive compatibile	PGST Home Security System, Smartphone (via app)

Garanție și suport

For warranty information, technical support, or further assistance with your PGST PB-68 Door and Window Sensor, please refer to the documentation provided with your PGST alarm host or visit the official PGST website. PGST is committed to customer experience and continuously improving its products and services.

You can also find more information and contact support through the Magazin PGST pe Amazon.

	Manual de utilizare senzor ușă/fereastră PGST WIFI Manual de utilizare pentru senzorul de ușă și fereastră PGST WIFI, care detaliază funcțiile, funcționarea, instalarea și specificațiile acestuia. Include informații de conformitate cu FCC.
	Sistem de alarmă inteligent PGST - Instrucțiuni de utilizare și asistență Începeți să utilizați sistemul dumneavoastră de alarmă inteligent PGST (PG-103, PG107). Acest ghid oferă instrucțiuni de utilizare, date de contact pentru asistență și informații despre resurse multilingve pentru securitatea locuinței.
	Manual de utilizare sistem de alarmă GSM și WiFi Manual de utilizare pentru sistemul de alarmă GSM și WiFi, care detaliază caracteristicile, configurarea, funcționarea și integrarea aplicației mobile pentru gazda de alarmă PG103.
	Manual de utilizare pentru sistemul de alarmă PGST PG-500 GSM 2G/4G/WiFi Manual de utilizare detaliat pentru sistemul de alarmă PGST PG-500 GSM 2G/4G/WiFi. Acoperă instalarea, configurarea și operarea aplicației mobile, setările sistemului, utilizarea zilnică, întreținerea, specificațiile tehnice și depanarea.
	PGST PG-109 Alarm Host Manual de utilizare Manual de utilizare complet pentru sistemul de securitate PGST PG-109 Alarm Host, care acoperă instalarea, operarea, funcții precum telecomanda, detectoare wireless, integrarea aplicațiilor și specificațiile tehnice.
	Manual de utilizare pentru alarma de fum PG-S01 \| PGST Manual de utilizare complet pentru alarma de fum PGST PG-S01, care acoperă instalarea, operarea, depanarea și specificațiile tehnice. Asigurați siguranța locuinței cu acest detector fotoelectric de fum fiabil.

PGST PB-68