XIXIMENG R36S Retro Handheld Game Console User Manual

1. Introducere

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your XIXIMENG R36S Retro Handheld Game Console. Please read this manual thoroughly to ensure proper use and to maximize your gaming experience.

2. Produs terminatview

2.1 Caracteristici cheie

• Afişa: 3.5-inch IPS screen with wide viewunghiuri de ing.
• Procesor: Quad-core 64-bit Cortex-A35, up to 1.8GHz.
• Memorie: 1GB DDR3L RAM.
• Depozitare: 64GB capacity, supporting dual TF card design for independent system and game storage.
• Sistem de operare: Open-source Linux system.
• Emulare: Supports 21 emulators for over 15,000 pre-installed games.
• Baterie: 3500mAh high-capacity battery for extended playtime.
• comenzi: Dual 3D joysticks, D-pad, action buttons, and upgraded L/R shoulder keys.
• Conectivitate: OTG port for external display or gamepad connection.

2.2 Console Components

Familiarize yourself with the various parts of your R36S console:

Imagine: față view of the R36S console, showing the screen, D-pad, dual joysticks, action buttons (A, B, X, Y), Start, Select, and function buttons.

Imagine: Spate view of the R36S console, highlighting the L1, L2, R1, R2 shoulder buttons.

• Ecran IPS de 3.5 inci: Afișaj de înaltă rezoluție pentru imagini clare.
• D-pad: Directional pad for movement and menu navigation.
• Dual 3D Joysticks: For precise analog control in games.
• Butoane de acțiune (A, B, X, Y): Butoane principale de introducere a datelor în joc.
• Start/Select Buttons: For game functions and menu selections.
• L1/L2/R1/R2 Shoulder Buttons: Additional input buttons, located on the top rear of the console.
• Buton de alimentare: To turn the console on or off.
• Butoane de volum: To adjust audio output.
• Port USB-C: For charging and OTG connectivity.
• Jack pentru căști: Pentru ieșirea audio către căști.
• TF Card Slots: Two slots for system and game storage cards.

3. Configurare inițială

3.1 Charging the Console

Before first use, fully charge the console. Connect the provided USB-C cable to the console's USB-C port and the other end to a compatible USB power adapter (not included) or a computer USB port. The charging indicator will illuminate and turn off once fully charged.

3.2 Inserting Storage Cards

The R36S uses a dual TF card system. One card is for the operating system, and the other is for game ROMs. Ensure both cards are properly inserted into their respective slots before powering on the device.

• Locate the TF card slots on the side of the console.
• Gently insert the system TF card into the designated slot until it clicks into place.
• Insert the game ROMs TF card into the second slot until it clicks.
• Pentru a scoate cardul, apăsați ușor spre interior până când acesta iese.

4. Instrucțiuni de utilizare

4.1 Pornire/Oprire

• Pentru a porni: Apăsați și mențineți apăsat butonul de pornire/oprire până când ecranul se aprinde.
• Pentru a opri: Press and hold the Power button, then select the 'Shutdown' option from the menu. Alternatively, a quick press of the Power button may put the device into sleep mode.

4.2 Navigarea prin interfață

Use the D-pad or the left analog joystick to navigate through menus and select options. The 'A' button typically confirms a selection, while the 'B' button usually cancels or goes back.

4.3 Jocuri

• From the main menu, select the desired emulator or game system.
• Browse the list of available games using the D-pad or joystick.
• Press the 'A' button to launch a game.
• During gameplay, use the D-pad, joysticks, and action buttons as per the game's controls.

4.4 Saving and Loading Game Progress

Most emulators support in-game saving and loading (savestates). Refer to the specific emulator's menu (often accessed by pressing a combination of buttons like 'Select' + 'X' or 'Start' + 'Select') for options to save, load, or exit a game.

4.5 Setări de sistem

Access the system settings menu to customize various aspects of your console, including display brightness, audio volume, Wi-Fi connectivity (if available), and controller mapping. Navigation within the settings menu follows the same principles as the main interface.

4.6 Connecting External Devices (OTG)

The R36S features an OTG (On-The-Go) port, allowing connection to external devices.

Image: The R36S console highlighting the OTG port and illustrating connections to a large screen display and an external gamepad via an OTG adapter.

• Afișaj extern: Connect an OTG adapter (not included) to the USB-C port, then connect an HDMI cable (via an appropriate adapter) to an external monitor or TV for a larger screen experience.
• External Gamepad: Connect a USB gamepad via an OTG adapter to play games with an alternative controller.

5. Întreținere

5.1 Curățare

To clean the console, use a soft, dry cloth. For stubborn smudges, slightly dampen the cloth with water. Avoid using harsh chemicals or abrasive materials, as these can damage the screen or casing.

5.2 Actualizări de software

Periodically check for software updates to improve performance, add features, or fix bugs. Instructions for updating the open-source Linux system can typically be found on community forums or the manufacturer's support page. Ensure the console is fully charged before attempting any updates.

6. Depanare

If you encounter issues with your R36S console, refer to the following common problems and solutions:

• Consola nu pornește:
  Ensure the console is fully charged. Connect it to a power source and wait a few minutes before attempting to power on again. Check that the system TF card is properly inserted.
• Games are not loading or appear corrupted:
  Verify that the game ROMs TF card is correctly inserted. Ensure the game files are in compatible formats for the respective emulators. Try re-inserting the game TF card.
• Ecranul nu răspunde sau este blocat:
  Perform a hard reset by pressing and holding the Power button for approximately 10-15 seconds until the device powers off. Then, power it back on normally.
• Fara sunet:
  Check the volume settings using the volume buttons. Ensure headphones are properly connected if in use.
• External display not working via OTG:
  Ensure the OTG adapter and HDMI cable are securely connected. Verify that the external display is set to the correct input source.

For persistent issues not covered here, please consult online communities or the manufacturer's support resources.

7. Specificatii tehnice

8. Garanție și asistență

Pentru informații despre garanție și asistență pentru clienți, vă rugăm să consultați documentația furnizată odată cu achiziția sau să contactați direct distribuitorul/producătorul. Păstrați dovada achiziției pentru orice reclamații în garanție.