KOORUI KR20Y Single Monitor Desk Mount User Manual

Introducere

Thank you for choosing the KOORUI KR20Y Single Monitor Desk Mount. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your monitor arm. Designed for 17-32 inch flat and curved screens, this mount offers VESA 75x75mm and 100x100mm compatibility and supports monitors weighing between 2-9 kg (4.4-19.8 lbs). Please read this manual thoroughly before assembly and retain it for future reference.

Informații de siguranță

Vă rugăm să respectați următoarele măsuri de siguranță pentru a preveni vătămările corporale sau deteriorarea:

• Nu depășiți capacitatea maximă de încărcare de 9 kg (19.8 lbs).
• Ensure the mounting surface (desk) is strong enough to support the combined weight of the mount and your monitor.
• Follow all assembly instructions carefully. If you have any doubts, consult a qualified professional.
• Țineți copiii și animalele de companie departe în timpul instalării.
• Check all connections and fasteners regularly to ensure they remain secure.
• Avoid pinching cables during adjustment to prevent damage.

Conținutul pachetului

Vă rugăm să verificați dacă toate componentele sunt prezente înainte de a începe instalarea:

• Ansamblu braț monitor
• C-Clamp Hardware de montare
• Grommet Mounting Hardware
• Placă VESA
• Monitor Mounting Screws (various sizes)
• Hex Keys / Adjustment Tools
• Cleme de gestionare a cablurilor
• Manual de utilizare (acest document)

Image: All components of the KOORUI KR20Y Monitor Arm, including the arm, C-clamp, and grommet mount options.

Specificații

Image: Visual representation of the monitor arm's universal compatibility, showing supported screen sizes (17-32 inch), load capacity (2-9kg), and VESA standards (75x75mm, 100x100mm).

Configurare și instalare

The KOORUI KR20Y monitor arm offers two installation options: C-Clamp Mount and Grommet Mount. Choose the method best suited for your desk.

Image: Diagram illustrating the two available installation methods: C-Clamp Mount and Grommet Mount.

1. C-Clamp Munte

This method is suitable for desks with a thickness between 20-80mm (0.78-3.14 inches).

1. Atașați C-clamp base to the edge of your desk.
2. Strângeți clamp screw until the base is securely fastened to the desk. Ensure it is stable and does not wobble.
3. Insert the main pole of the monitor arm into the C-clamp baza.
4. Secure the pole with the provided screw or knob.

2. Grommet Mount

This method requires a pre-drilled hole in your desk with a diameter of 10-50mm (0.39-1.96 inches) and is suitable for desks with a thickness between 20-90mm (0.78-3.54 inches).

1. Dezasamblați C-cl-ulamp components from the base if they are pre-attached.
2. Insert the grommet bolt through the pre-drilled hole in your desk.
3. Secure the grommet base from underneath the desk using the provided washer and nut. Tighten firmly.
4. Insert the main pole of the monitor arm into the grommet base.
5. Secure the pole with the provided screw or knob.

3. Atașarea monitorului

1. Attach the VESA plate to the back of your monitor using the appropriate screws. Ensure the screws are not overtightened.
2. Slide the monitor (with the attached VESA plate) onto the arm's VESA head.
3. Secure the monitor to the arm using the locking mechanism (if present) or by tightening the designated screws.

4. Gestionarea cablurilor

Traseați cablurile monitorului prin canalele integrate de gestionare a cablurilor de pe braț pentru a menține un spațiu de lucru ordonat.

Image: The monitor arm with cables neatly routed through its integrated cable management system, contributing to a clean desk setup.

Instrucțiuni de operare

The KOORUI KR20Y monitor arm features a gas spring system for smooth and effortless adjustments. Adjustments can be made to achieve an ergonomic viewexperiență.

Image: Detailed diagram showing the full range of motion of the monitor arm, including tilt, swivel, rotation, and maximum extension/height.

1. Reglarea înălțimii

Gently push or pull the monitor up or down to adjust its height. The gas spring will hold the monitor in your desired position. If the arm is too stiff or too loose, adjust the gas spring tension (see Întreţinere secțiune).

2. Reglarea înclinării

Grasp the top and bottom edges of your monitor and tilt it forward or backward to achieve an optimal viewing angle. The tilt range is +85° to -30°.

3. Reglarea pivotării

Rotate the monitor left or right at the VESA plate connection point. The swivel range is ±90°.

4. Rotation (Portrait/Landscape)

Rotate the monitor 360° to switch between landscape and portrait orientations as needed.

Imagine: O radiografie view highlighting the premium gas spring mechanism within the monitor arm, indicating its durability and smooth adjustment capabilities.

Întreţinere

• Gas Spring Tension Adjustment: If the monitor arm does not hold its position or is difficult to move, use the provided hex key to adjust the gas spring tension. Turn clockwise to increase tension (for heavier monitors) and counter-clockwise to decrease tension (for lighter monitors). Adjust gradually until the arm moves smoothly and holds the monitor securely.
• curatenie: Ștergeți brațul monitorului cu o lavetă moale șiamp Evitați utilizarea de produse de curățare abrazive sau solvenți.
• Inspectie periodica: Verificați periodic toate șuruburile și conexiunile pentru a vă asigura că sunt strânse și fixate.

Depanare

Garanție și suport

For warranty information or technical support, please refer to the warranty card included with your product or visit the official KOORUI website. If you encounter any issues not covered in this manual, please contact KOORUI customer service for assistance.