Introducere
This instruction manual provides detailed information on the safe and effective use of your Godox DP800III Strobe Flash. Please read this manual thoroughly before operating the unit to ensure optimal performance and to prevent damage. Keep this manual for future reference.
The Godox DP800III is a professional studio flash designed for various photography applications, including wedding, advertising, portrait, and fashion photography. It features an 800Ws flash tube, built-in 2.4G wireless X system, Bowens mount compatibility, and a fast recycling time.
Măsuri de siguranță
- Asigurați-vă întotdeauna voltajul alimentării cu energie electricătage matches the unit's requirements (110V for this model).
- Do not operate the flash unit in wet conditions or expose it to rain or moisture.
- Avoid touching the flash tube or modeling lamp immediately after use, as they can be extremely hot.
- Do not disassemble or modify the unit. Repairs should only be performed by authorized service personnel.
- Păstrați unitatea departe de materialele inflamabile.
- Asigurați o ventilație adecvată în jurul unității în timpul funcționării pentru a preveni supraîncălzirea.
- Unplug the unit from the power outlet before cleaning or when not in use for extended periods.
Produs terminatview
Caracteristici cheie
- 800Ws Strobe Light: Provides powerful and consistent illumination for professional photography.
- Built-in 2.4G Godox Wireless X System: Enables wireless triggering and control with compatible Godox X system transmitters (e.g., X2, XPro, XT32, FT-16).
- Timp rapid de reciclare: Achieves a 1-second recycling time at full power, improving shooting efficiency.
- Accurate Color Temperature: Maintains stable color temperature for consistent results.
- Wide Power Output Range: Offers 61 steps of power output from 1/64 to 1/1.
- Multiple Modeling Lamp Moduri: Features OFF, PROP (proportional), and Percentage modes for the modeling lamp.
- Memorie inteligentă: Automatically recovers the last adjusted settings upon restart.
- 99 Wireless ID Settings: Minimizes interference from other nearby wireless systems.
- Muntele Bowens: Compatible with a wide range of Bowens mount light modifiers.
Componente
Figura 1: Faţă view of the Godox DP800III Strobe Flash, showing the flash tube and Bowens mount.
Figura 2: Spate view of the Godox DP800III Strobe Flash, highlighting the control panel with LCD display and various buttons.
Figura 3: Pesteview of the Godox DP800III Studio Flash Light, illustrating its key features including 800W flash tube, 2.4G Wireless X System, and Bowens Mount.
Figura 4: Detaliat view of the control panel, showing the sync port, USB port, and S1/S2 optical slave trigger buttons.
Înființat
Despachetarea și inspecția inițială
Carefully remove all components from the packaging. Verify that all items listed in the "What's in the Box" section are present and undamaged. If any items are missing or damaged, contact your retailer immediately.
Figura 5: Contents of the Godox DP800III package, typically including the strobe unit, power cable, and protective cap.
Montarea blițului
- Attach the flash unit to a sturdy light stand using the mounting bracket. Ensure the locking knob is securely tightened.
- Remove the protective cap from the flash tube.
- If using a light modifier (e.g., softbox, reflector), align its Bowens mount with the flash unit's mount and rotate until it locks into place.
Conexiune de alimentare
- Connect the power cable to the AC input port on the rear of the flash unit.
- Plug the other end of the power cable into a suitable 110V AC power outlet.
Instrucțiuni de operare
Pornire/Oprire
To power on the unit, flip the power switch located on the rear control panel to the "ON" position. The LCD display will illuminate. To power off, flip the switch to the "OFF" position.
Reglarea puterii blițului
Rotiți SET dial on the control panel to adjust the flash power output. The power can be set from 1/64 to 1/1 in precise increments. The current power setting will be displayed on the LCD screen.
Figura 6: The LCD display showing flash power settings, adjustable via the SET dial.
Modelare Lamp Controla
Apăsați tasta MODEL buton pentru a parcurge meniul de modelareamp moduri:
- OPRIT: Modelare lamp este oprit.
- PROP (Proportional): Modelare lamp brightness adjusts proportionally to the flash power setting.
- Procenttage: Modelare lamp brightness can be set to a specific percentage.
Wireless X System Operation
The DP800III features a built-in 2.4G Godox Wireless X System for remote control.
- Setarea grupului și a canalului: Apăsați tasta GR/CH button to switch between group and channel settings. Rotate the SET dial to select the desired group (0-9, A-F) and channel (1-32). Ensure your Godox X system transmitter is set to the same group and channel.
- Setting Wireless ID: Apăsați tasta C.Fn button to access custom functions, then navigate to the wireless ID setting. Rotate the SET dial to select an ID from 01-99. This helps prevent interference when multiple Godox systems are in use nearby.
- Moduri slave optic (S1/S2): Apăsați tasta S1/S2 button to activate optical slave modes.
- Modul S1: The flash will fire in response to a single flash from another manual flash.
- Modul S2: The flash will ignore the pre-flash of a TTL flash and fire on the main flash.
Figura 7: Display showing the settings for Wireless ID (01-99), 32 Channels, and 16 Groups for the Godox Wireless X System.
Figura 8: The DP800III Strobe Flash shown with various compatible Godox X system triggers, including the X1, XT32, and V860II.
Test Flash and Recycle Time
Apăsați tasta TEST button to fire a test flash. The unit will then begin recycling. The recycle indicator will light up when the unit is ready to fire again. The DP800III boasts a fast recycle time of approximately 1 second at full power.
Figura 9: Illustration highlighting the rapid 0.3-1 second recycle time of the Godox DP800III, crucial for timely shooting.
Întreţinere
- curatenie: Folosiți o cârpă moale și uscată pentru a curăța exteriorul blițului. Pentru murdăria persistentă, ștergeți ușoramp Se poate folosi o lavetă, urmată de o lavetă uscată. Nu folosiți solvenți sau produse de curățare abrazive.
- Tub flash: The flash tube is a consumable part. If it becomes discolored or fails to fire, it may need replacement. Consult an authorized service center for flash tube replacement.
- Depozitare: When not in use, store the flash unit in a cool, dry place, away from direct sunlight and excessive humidity. Reattach the protective cap to the flash tube.
- Ventilare: Regularly check that the ventilation openings are clear of dust and debris to ensure proper heat dissipation.
Depanare
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Blițul nu pornește. | Power cable not connected; power outlet faulty; unit malfunction. | Check power cable connection; try a different outlet; contact service center. |
| Blițul nu se declanșează. | Unit not recycled; trigger not working; flash tube faulty. | Wait for recycle indicator; check trigger connection/settings; contact service center. |
| Declanșarea wireless eșuează. | Incorrect group/channel/ID; distance too far; interference. | Verify group, channel, and ID settings on both flash and transmitter; reduce distance; change wireless ID. |
| Modelare lamp nu funcționează. | Lamp mode set to OFF; lamp defect. | Check modeling lamp mode setting; contact service center for replacement. |
Specificații
| Caracteristică | Caietul de sarcini |
|---|---|
| Model | DP800III |
| Puterea blițului | 800Ws |
| Power Output Range | 1/64 - 1/1 (61 steps) |
| Timp de reciclare | Approx. 1 second (at full power) |
| Durata blițului | 1/2000 - 1/800s |
| Temperatura de culoare | Stabil |
| Sistem wireless | Sistem wireless Godox X 2.4G încorporat |
| Grupuri fără fir | 16 (0-9, A-F) |
| Canale fără fir | 32 (1-32) |
| ID wireless | 99 (01-99) |
| Modelare Lamp Moduri | OFF / PROP / Percentage |
| Tip de montare | Muntele Bowens |
| Intrare de putere | 110V AC (US version) |
| Greutatea articolului | 10.78 livre (aprox. 4.89 kg) |
| Dimensiuni pachet | 17.75 x 11 x 8.5 inci (aprox. 45.09 x 27.94 x 21.59 cm) |
Nota: Specificațiile pot fi modificate fără notificare.
Garanție și suport
Pentru informații despre garanție și asistență tehnică, vă rugăm să consultați cardul de garanție inclus împreună cu produsul sau să vizitați site-ul oficial Godox. website. You may also contact your local retailer for assistance.
Producător: GODOX
