1. Introducere
This manual provides essential information for the safe and efficient use of your FSP 250-50GUB Flex ATX Power Supply. This power supply delivers a true 250 watts of continuous power and is designed for compact systems, such as mini-ITX applications. It features an 80 PLUS® Bronze certification for energy efficiency and includes comprehensive protection mechanisms to safeguard your system components.
2. Informații de siguranță
Always observe the following safety precautions to prevent injury or damage to the power supply and connected components:
- Do not open the power supply unit. Vol. Maretages are present inside, even when disconnected from power.
- Asigurați-vă că sursa de alimentare este deconectată de la priza de curent alternativ înainte de instalare sau întreținere.
- Instalați sursa de alimentare într-o zonă bine ventilată pentru a preveni supraîncălzirea.
- Use only the cables provided with the power supply or compatible replacements.
- Evitați expunerea sursei de alimentare la umiditate sau temperaturi extreme.
- This power supply complies with newer IEC 62368 Standards and includes OVP (Over Voltage Protection), UVP (sub voltage Protection), OPP (Over Power Protection), SCP (Short Circuit Protection), and OTP (Over Temperature Protection) for hardware safety.
3. Produs terminatview
The FSP 250-50GUB is a Flex ATX power supply designed for reliability and efficiency in small form factor systems. Key features include:
- 250W True Power: Provides stable and continuous power output.
- Certificare 80 PLUS Bronze: Ensures high energy efficiency, meeting Energy Star Version 6.1 requirements.
- Ventilator silentios: Equipped with a 4x4 cm double ball bearing fan for extended life and reduced noise levels.
- Full Range PFC Active: Active Power Factor Correction for stable power delivery.
- Protecție cuprinzătoare: Includes OVP, UVP, OCP, OPP, and SCP for system safety.
Figura 1: Faţă view of the FSP 250-50GUB Flex ATX Power Supply, showing the power input and ventilation grille.
Figura 2: Spate view of the FSP 250-50GUB Flex ATX Power Supply, illustrating the fan and cable bundle exit point.
4. Specificații
| Caietul de sarcini | Valoare |
|---|---|
| Dimensiuni produs (L x l x H) | 5.91 x 3.15 x 1.57 inchi (150 x 80 x 40 mm) |
| Greutatea articolului | 1.61 lire sterline |
| Factor de formă | Flex ATX |
| Putere de ieșiretage | 250 wați |
| Certificare de eficiență | 80 Plus Bronze (115V) |
| Metoda de răcire | Air (1 fan) |
| Tip conector | ATX |
| Dispozitive compatibile | Computer personal |
| Caracteristici de protecție | OVP, UVP, OCP, OPP, SCP |
Figura 3: Detailed output table and physical dimensions of the FSP Flex ATX Power Supply.
5. Instalare și configurare
Follow these general steps for installing your Flex ATX power supply:
- Pregătiți-vă sistemul: Asigurați-vă că ați oprit computerul și deconectat de la priza de perete. Deschideți carcasa computerului.
- Scoateți sursa veche (dacă este cazul): Disconnect all cables from the old power supply and remove its mounting screws. Carefully take out the old unit.
- Instalați o sursă nouă: Insert the FSP 250-50GUB into the Flex ATX power supply bay of your chassis. Secure it with the appropriate screws. This unit is designed to fit into most Flex ATX chassis available.
- Cabluri de conectare: Connect the power supply cables to your motherboard and other components. Refer to your motherboard and component manuals for specific connection points.
- Placa de baza: Connect the 24-pin ATX connector and the 4-pin or 4+4-pin CPU connector.
- Periferice: Connect SATA power connectors to storage drives and Molex connectors to other compatible devices.
- Graphics Cards: If your system requires it, connect the appropriate PCI-E power connectors.
- Cabluri sigure: Route and secure cables to ensure proper airflow and prevent interference with other components.
- Închideți cazul: Once all connections are made and secured, close your computer case.
- Pornire: Plug the AC power cord into the power supply and then into a wall outlet. Turn on your computer.
Figura 4: Illustration of various connector types provided by the FSP Flex ATX Power Supply, including 24-pin ATX, 8-pin CPU, 4+4-pin CPU, PCI-E 2+6, SATA, Molex, and Floppy connectors.
Video 1: This video demonstrates general features and installation concepts for FSP Flex ATX power supplies, including 1U bracket installation, Flex ATX chassis compatibility, efficiency, safety protections, and cable types. While the video specifically references a 'FlexGURU PRO 500W' model, the principles shown are broadly applicable to the FSP 250-50GUB Flex ATX Power Supply.
6. Instrucțiuni de utilizare
The FSP 250-50GUB power supply operates automatically once correctly installed and connected. Ensure the power switch on the back of the unit (if present) is in the 'ON' position before powering on your computer. The power supply will deliver stable power to your components as needed.
7. Întreținere
Întreținerea regulată ajută la asigurarea longevității și a performanței optime a sursei de alimentare:
- Îndepărtarea prafului: Curățați periodic praful de pe ventilatorul și grilele de ventilație ale sursei de alimentare folosind aer comprimat. Asigurați-vă că sistemul este oprit și deconectat de la priză înainte de curățare.
- Organizare de cabluri: Ensure cables are neatly routed and do not obstruct airflow within the chassis.
- Conditii de mediu: Folosiți sursa de alimentare în intervalele de temperatură și umiditate recomandate.
8. Depanare
Dacă întâmpinați probleme cu sursa de alimentare, luați în considerare următorii pași comuni de depanare:
- Fără putere:
- Verificați dacă cablul de alimentare CA este conectat corect atât la sursa de alimentare, cât și la priza de perete.
- Verify that the power switch on the power supply is in the 'ON' position.
- Testați priza de perete cu un alt dispozitiv pentru a vă asigura că are curent.
- Instabilitate a sistemului/Opriri aleatorii:
- Ensure all power connectors (24-pin ATX, CPU, PCI-E, SATA) are firmly seated.
- Check for proper ventilation and ensure the power supply fan is spinning. Overheating can cause instability.
- If possible, test the power supply with a different set of components or in another system to rule out other hardware issues.
- Zgomot puternic al ventilatorului:
- Curățați orice acumulare de praf de pe ventilator și grile.
- Ensure the power supply is not overloaded, which can cause the fan to spin faster.
If problems persist after attempting these steps, contact FSP customer support or a qualified technician.
9. Garanție și asistență
FSP products are manufactured to high-quality standards. For warranty information and technical support, please refer to the official FSP website-ul web sau contactați distribuitorul local. Păstrați bonul fiscal ca dovadă a achiziției pentru reclamațiile în garanție.
