Manual de utilizare pentru stația meteo wireless BRESSER Beaufort 5 în 1 Centru meteorologic

1. Produs terminatview

The BRESSER Beaufort 5-in-1 Wireless Weather Station Meteorological Center provides comprehensive weather data directly to your home. It includes an indoor display unit and a multi-sensor outdoor unit that measures temperature, humidity, wind speed, wind direction, and rainfall.

Image: The main display unit of the BRESSER Beaufort 5-in-1 Wireless Weather Station, showing indoor and outdoor temperature, humidity, wind data, forecast, barometric pressure, and time.

2. Configurare

2.1 Despachetarea și verificarea componentelor

Despachetați cu grijă toate componentele și asigurați-vă că următoarele articole sunt prezente:

• Unitate de afișare principală
• 5-in-1 Outdoor Multi-Sensor Unit
• Mounting accessories (pole, base, screws)
• Power adapter for main unit
• Manual de instructiuni

2.2 Instalarea bateriei

Unitatea principală de afișare: Insert 1x CR2032 battery (not included) into the battery compartment for backup power. Connect the main unit to a power outlet using the provided adapter.

Unitate multi-senzor externă: Insert 3x AA batteries (not included) into the battery compartment of the outdoor sensor. Ensure correct polarity.

2.3 Outdoor Sensor Placement and Mounting

Plasarea corectă a senzorului exterior este crucială pentru citiri precise.

• Mount the sensor in an open area, away from obstructions like buildings or trees, to ensure accurate wind and rain measurements.
• Ensure the sensor is mounted level to guarantee accurate rainfall collection and wind direction.
• Orient the wind vane (the arrow) to point North during installation.
• Use the provided mounting pole and base to secure the sensor to a stable surface or pole.

Imagine: Laterală view of the BRESSER 5-in-1 outdoor multi-sensor unit, showing the wind cups, wind vane, and rain collector.

2.4 Sincronizare inițială

After installing batteries in both units, place them within close proximity. The main display unit will automatically search for and connect to the outdoor sensor. This process may take a few minutes. Once connected, outdoor data will appear on the display.

2.5 Setarea orei și datei

The weather station may attempt to synchronize time via RCC (Radio Controlled Clock) signal. If an RCC signal is not available in your region, or if you prefer, you can manually set the time and date using the buttons on the main display unit. Refer to the specific button functions in the Operating section for detailed instructions.

3. Funcționarea stației meteo

3.1 Afișare pesteview

The main display unit presents various weather parameters:

• OUT: Temperatura și umiditatea exterioară.
• ÎN: Temperatura și umiditatea interioară.
• VÂNT: Current wind speed and direction, including gust speed.
• PROGNOZA: Weather forecast icons (sunny, cloudy, rainy, etc.).
• BARO: Citiri ale presiunii barometrice.
• RAINFALL: Acumularea de precipitații zilnice, săptămânale sau lunare.
• TIMP / DATA: Current time, date, and day of the week.
• BEAUFORT: Beaufort scale indicator for wind force.
• REFRIGERARE EOLIANĂ: Calculated wind chill temperature.

Imagine: față view of the BRESSER Beaufort 5-in-1 Wireless Weather Station display, highlighting the various data fields and their arrangement.

3.2 Funcțiile butoanelor

The display unit features several buttons for navigation and settings:

• ISTORIE: View historical data for various parameters.
• MAX / MIN: Display maximum and minimum recorded values for temperature, humidity, etc. Press again to clear.
• APRINDE: Adjust backlight brightness or activate temporary backlight.
• MOD/SET: Enter settings mode or confirm selections.
• Săgeți SUS/JOS: Navigate through menus or adjust values.

3.3 Setarea alarmelor

You can set alarms for specific weather conditions, such as high/low temperature, high wind speed, or heavy rainfall. Enter the alarm setting mode using the MODE/SET button and follow the on-screen prompts to configure your desired alarm thresholds.

3.4 Selectarea unității

To change units (e.g., Celsius to Fahrenheit, mph to km/h, inHg to hPa), access the settings menu. Navigate to the unit selection option and choose your preferred measurement units.

4. Întreținere

4.1 Înlocuirea bateriei

Replace batteries in the outdoor sensor when the low battery indicator appears on the main display. Due to the outdoor placement, ensure safe access for battery replacement. The main unit's backup battery should be replaced periodically, typically every 1-2 years.

4.2 Curățare

Periodically clean the outdoor sensor unit to ensure accurate readings. Remove any debris from the rain collector, wind cups, and wind vane. Use a soft, damp cloth for cleaning; avoid abrasive cleaners or solvents. Clean the display unit with a soft, dry cloth.

4.3 Îngrijire generală

Ensure the outdoor sensor is securely mounted and free from physical damage. Protect the main display unit from extreme temperatures, direct sunlight, and moisture.

5. Depanare

• Niciun afișaj pe unitatea principală: Check power adapter connection and backup battery.
• Fără date în aer liber: Ensure outdoor sensor batteries are fresh and correctly installed. Verify both units are within range and attempt re-synchronization (refer to setup instructions). Check for obstructions between units.
• Citiri inexacte: Ensure the outdoor sensor is mounted correctly (level, clear of obstructions, wind vane pointing North). Clean sensors if necessary.
• Ora/data incorectă: If RCC synchronization fails, manually set the time and date.

6. Specificații

7. Garanție și asistență

For warranty information, please refer to the documentation included with your product packaging or visit the official BRESSER website. For technical support or assistance, please contact BRESSER customer service directly through their official channels.