Introducere
This manual provides essential information for the safe and effective installation, operation, and maintenance of the Allanson Ignition Transformer, Model 2721-628G. This transformer is specifically designed for use with Becket A, AF, and AFG series oil burners. Please read this manual thoroughly before attempting any installation or service.
Informații de siguranță
AVERTIZARE: Electrical shock hazard. Installation and servicing of this product must be performed by a qualified technician. Disconnect all power to the burner and heating system before installing, servicing, or removing the ignition transformer.
- Always ensure power is disconnected at the main circuit breaker before beginning any work.
- Verificați voltage and current ratings match the burner's requirements.
- Do not operate the transformer if it is damaged or has exposed wiring.
- Asigurați o împământare adecvată pentru a preveni pericolele electrice.
- Respectați toate codurile și reglementările electrice locale.
Produs terminatview
The Allanson Ignition Transformer (Model 2721-628G) is a critical component in oil burner systems, responsible for generating the high voltage required to ignite the fuel. It converts standard line voltage to a high-voltage spark, ensuring reliable ignition.
This image shows the Allanson Ignition Transformer, Model 2721-628G, from a front-top perspective. The primary label is visible, indicating "PRIMARY 120 V 60 HZ 250 VA" and "SECONDARY 10,000 V 23 MA". Two high-voltage terminals with springs are visible at the top, along with input wires extending from the sides. The unit is black with a green circular sticker on the side.
Această imagine prezintă o latură view of the Allanson Ignition Transformer. One of the high-voltage terminals with its spring is clearly visible, along with the input wiring. The mounting bracket is also visible on the side, and the green circular sticker is prominent on the main body of the transformer.
Configurare și instalare
Installation of the ignition transformer should only be performed by a qualified HVAC technician or electrician. Incorrect installation can lead to equipment damage, fire, or serious injury.
- Deconectare de la curent: Before starting, ensure all electrical power to the oil burner and heating system is completely disconnected at the main service panel. Verify with a voltage tester.
- Access Old Transformer: Locate the existing ignition transformer on your Becket A, AF, or AFG burner. Note its mounting position and wiring connections.
- Deconectați cablarea: Carefully disconnect the primary (low voltage) and secondary (high voltage) wiring from the old transformer. Label wires if necessary to ensure correct reconnection.
- Remove Old Transformer: Unmount the old transformer from its bracket or housing.
- Mount New Transformer: Mount the new Allanson 2721-628G transformer in the same location and orientation as the old one. Ensure it is securely fastened.
- Conectare cablare:
- Connect the primary (120V) input wires to the designated terminals on the new transformer. Refer to the burner's wiring diagram for specific connections.
- Connect the secondary (high voltage) output wires to the electrodes of the oil burner. Ensure a secure and proper connection to the spark gap.
- Verificați conexiunile: Double-check all wiring connections for tightness and correctness according to the burner's specifications. Ensure no wires are pinched or exposed.
- Restabiliți alimentarea și testați: Once all connections are secure and verified, restore power to the burner. Initiate a call for heat and observe the ignition sequence. The transformer should produce a strong, consistent spark.
Principiul de funcționare
The Allanson Ignition Transformer operates by stepping up the incoming 120V AC line voltage to a high voltage (10,000V) at a low current (23mA). This high voltage is then applied across the burner electrodes, creating an electrical arc (spark) that ignites the atomized fuel oil. The transformer is designed for intermittent duty, meaning it only operates during the ignition cycle of the burner, typically for a few seconds until stable combustion is established.
Întreţinere
Regular maintenance helps ensure the longevity and reliable operation of your ignition transformer. All maintenance should be performed by a qualified technician with power disconnected.
- Inspecție anuală: During routine burner servicing, inspect the transformer for any signs of physical damage, corrosion, or overheating (discoloration).
- Verificarea cablajului: Verify that all primary and secondary wiring connections are secure and free from fraying or insulation damage.
- Curăţenie: Keep the transformer and its surroundings free from dust, dirt, and oil residue, which can impede heat dissipation and lead to premature failure.
- Stare electrod: While not directly part of the transformer, ensure the burner electrodes are clean, properly gapped, and free from cracks or carbon buildup, as their condition directly impacts the transformer's performance.
Depanare
If your oil burner is experiencing ignition issues, the ignition transformer may be a contributing factor. Always ensure power is disconnected before inspecting components.
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| No Spark at Electrodes |
|
|
| Weak or Intermittent Spark |
|
|
| Transformer Overheating/Humming |
|
|
Dacă pașii de depanare nu rezolvă problema, se recomandă contactarea unui tehnician HVAC calificat pentru o diagnosticare și o reparație suplimentare.
Specificații
| Atribut | Detaliu |
|---|---|
| Marca | Allanson |
| Numărul de model | 2721-628G |
| Primar Voltage | 120 V |
| Frecvenţă | 60 Hz |
| Primary VA | 250 VA |
| Secundar Voltage | 10,000 V |
| Curent secundar | 23 mA |
| Dimensiuni pachet | 7.2 x 5.55 x 5.43 inci |
| Greutatea articolului | 7.69 lire sterline |
| Producător | Allanson |
| Specificație Met | ETL |
Informații despre garanție
Specific warranty terms for the Allanson Ignition Transformer (Model 2721-628G) are provided by the manufacturer, Allanson. Please refer to the warranty documentation included with your purchase or visit the official Allanson webpentru informații detaliate privind acoperirea garanției, durata și procedurile de reclamații. Păstrați dovada achiziției în scopul garanției.
Asistență pentru clienți
For technical assistance, installation questions, or troubleshooting beyond the scope of this manual, please contact a qualified HVAC professional or refer to the official Allanson support channels. Contact information for Allanson can typically be found on their official website-ul sau pe ambalajul produsului.
