1. Produs terminatview
The STANLEY 31250 Digital Daily Timer is designed to automate the power control of your electrical devices. It features a single polarized outlet and allows for daily programmable schedules. A built-in battery backup ensures that your settings are retained during power interruptions. This timer is suitable for various indoor applications where automated power cycling is desired.
2. Informații importante privind siguranța
- Numai pentru utilizare în interior: This timer is intended for indoor use in dry locations. Do not expose to water or moisture.
- Evaluare electrică: Do not exceed the electrical ratings of the timer or the connected appliance. Overloading can cause overheating and fire.
- Împământare: Ensure the timer is plugged into a properly grounded outlet.
- Copii: A nu se lăsa la îndemâna copiilor.
- curatenie: Deconectați de la priză înainte de curățare. Folosiți doar o cârpă uscată.
- Deteriora: Do not operate if the timer or its cord is damaged.
3. Configurarea inițială și setarea orei
Before programming, ensure the timer is plugged into a standard wall outlet to charge the internal battery backup and power the unit. The display will illuminate.
Figura 1: Față view of the STANLEY 31250 Digital Daily Timer, showing the digital display and control buttons (HOUR, MIN, TIME, ON, OFF, RESET).
3.1 Setarea orei curente
- Apăsați tasta TIMP button once. The display will show the current time setting.
- Apăsați tasta ORĂ button repeatedly to advance the hour. Note the AM/PM indicator.
- Apăsați tasta MIN button repeatedly to advance the minute.
- Once the correct time is set, press the TIMP Apăsați din nou butonul pentru a confirma și a ieși din modul de setare a orei.
Note: The internal battery backup will maintain the time settings for a period during power outages.
4. Instrucțiuni de utilizare
The STANLEY 31250 timer allows you to set one ON program and one OFF program that repeats daily.
Figure 2: The STANLEY 31250 Digital Daily Timer installed in a wall outlet, demonstrating its compact design and single output.
4.1 Setting ON/OFF Programs
- Apăsați tasta ON button once to enter the ON program setting mode. The display will show "ON" and the current ON time.
- Utilizați ORĂ şi MIN buttons to set the desired time for the device to turn ON.
- Apăsați tasta ON button again to confirm the ON time.
- Apoi, apăsați pe OFF button once to enter the OFF program setting mode. The display will show "OFF" and the current OFF time.
- Utilizați ORĂ şi MIN buttons to set the desired time for the device to turn OFF.
- Apăsați tasta OFF button again to confirm the OFF time and exit program setting mode.
The timer will now automatically cycle the connected device ON and OFF at the programmed times daily.
4.2 Anulare manuală
To manually turn the connected device ON or OFF outside of the programmed schedule:
- Apăsați tasta ON button to manually turn the device ON.
- Apăsați tasta OFF button to manually turn the device OFF.
The manual override will remain active until the next programmed ON or OFF event, at which point the timer will resume its schedule.
5. Întreținere
- curatenie: Deconectați cronometrul de la priză înainte de curățare. Ștergeți exteriorul cu o cârpă moale și uscată. Nu utilizați agenți de curățare lichizi sau materiale abrazive.
- Baterie: The internal battery backup is designed for long-term use and typically does not require user replacement. If settings are frequently lost during brief power outages, the internal battery may need servicing by a qualified technician.
6. Depanare
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Afișajul cronometrului este gol. | Not plugged in or no power to outlet. | Ensure the timer is securely plugged into a live outlet. Check the circuit breaker. |
| Dispozitivul nu se pornește/oprește la orele programate. | Incorrect program settings or manual override is active. | Review and re-enter ON/OFF program times. Ensure the current time is set correctly. Check if manual override was activated. |
| Setările se pierd după o întrerupere a alimentăriitage. | Internal battery backup is depleted or faulty. | Ensure the timer is plugged in for several hours to charge the backup battery. If the problem persists, contact customer support. |
| Butoanele nu răspund. | Eroare temporară de software. | Apăsați tasta RESET button (usually a small recessed button requiring a pen tip). This will clear all settings, requiring re-programming. |
7. Specificațiile produsului
- Număr de model: W31250
- Număr piesa: 31250
- Marca: STANLEY
- Sursa de alimentare: AC
- Ieșire: 1 Polarized Outlet
- Culoare: Alb
- Dimensiuni: 2.54 x 12.7 x 12.7 cm (1 x 5 x 5 țoli)
- Greutate: 106 g
- Caracteristici: Daily Repeat Program, Manual ON/OFF Override, Battery Backup
- Certificare de siguranță: Certificat ETL
- UPC: 686140312502
8. Garanție și asistență pentru clienți
For warranty information or technical assistance, please contact STANLEY customer support. Keep your purchase receipt as proof of purchase.
You can find more information about STANLEY products and support on their official website-ul sau prin magazinul lor de pe Amazon:
