1. Introducere
This manual provides detailed instructions for the installation, setup, and operation of your MOES WiFi Smart Wall Touch Light Switch. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Figure 1: MOES WiFi Smart Wall Touch Light Switch (1 Gang, Black)
2. Informații de siguranță
- Instalatie electrica: Installation should only be performed by a qualified electrician or a person with a thorough understanding of electrical wiring.
- Deconectare de la curent: Always disconnect power at the circuit breaker before installing, removing, or servicing the switch. Failure to do so may result in serious injury or death.
- Cablu neutru necesar: This smart switch requires a neutral wire in your switch box to operate correctly. If you do not have a neutral wire, this switch is not compatible.
- Rețea Wi-Fi: Requires a 2.4GHz Wi-Fi network connection. It is not compatible with 5GHz Wi-Fi networks.
- Compatibilitate: Only compatible with 1 gang switch boxes. Not compatible with standard US 2/3/4 gang switch plates. This switch is not designed for 3-way switch configurations or as a dimmer switch.
- Numai pentru utilizare în interior: Acest dispozitiv este destinat utilizării în interior, în locuri uscate.
- Vol. De operaretage: Asigurați-vă că sistemul electric funcționează în limitele specificatetagintervalul e (240 volți).
Figure 2: Key compatibility and wiring considerations.
3. Conținutul pachetului
- MOES WiFi Smart Wall Touch Light Switch (1 Gang)
- Manual de utilizare
- Șuruburi de montare
4. Caracteristicile produsului
- Control tactil: Features a toughened glass surface for touch operation.
- Control vocal: Compatible with Amazon Alexa (Amazon Echo/Dot/Tap) and Google Assistant for hands-free operation.
- Telecomanda Wi-Fi: Control the wall switch wirelessly from anywhere using the 'Smart Life' app on your smartphone via Wi-Fi or 4G network. No separate hub is required.
- Funcția de sincronizare: Schedule lights and appliances to turn on/off automatically at specific times.
Figure 3: Smart Switch in a home environment.
5. Specificații
| Caietul de sarcini | Valoare |
|---|---|
| Modul de operare | Automat, oprit, comutator inteligent |
| Evaluare curentă | 10 Amps |
| Vol. De operaretage | 240 volți |
| Tip de contact | Deschis normal |
| Tip conector | Fără fir |
| Terminal | Şurub |
| Dimensiuni articol (L x l x H) | 4.7 x 2.9 x 1.5 inci |
| Tipul circuitului | 1 sensuri |
| Tip actuator | Atingere |
| Material de contact | Alamă |
| Evaluarea internațională de protecție | IPX4 |
| Numărul de poziții | 3 |
| Tip controler | Amazon Alexa, Asistent Google |
| Metoda de control | Telecomanda |
| Protocol de conectivitate | Wi-Fi (doar 2.4 GHz) |
| Wattage | 1000 wați |
| Greutatea articolului | 7.4 uncii |
Figure 4: Product dimensions and wiring terminals.
6. Ghid de instalare
Înainte de a începe:
- Asigurați-vă că alimentarea este OPRITĂ la întrerupătorul de circuit.
- Confirm your switch box has a neutral wire. This is essential for the smart switch to function.
- Verificați dacă rețeaua Wi-Fi este de 2.4 GHz.
- This switch is for 1-gang setups only and is not a dimmer or 3-way switch.
Pași de cablare:
- Turn off power at the circuit breaker for the light switch you are replacing.
- Scoateți placa de perete existentă și comutator.
- Identify the wires: Live (usually black), Neutral (usually white), and Load (to the light fixture). A Ground wire (usually green or bare copper) may also be present.
- Connect the wires from your wall box to the corresponding terminals on the MOES Smart Switch:
- N: Connect the Neutral wire (usually white).
- L: Connect the Live wire (incoming power, usually black).
- L1: Connect the Load wire (to the light fixture). For 1-gang switches, only L1 is typically used.
- Sol: If present, connect the ground wire to the switch's ground terminal (if available) or safely cap it.
- Fixați întrerupătorul în cutia de perete folosind șuruburile furnizate.
- Attach the glass panel.
- Restabiliți alimentarea la întrerupătorul de circuit.
After installation, the indicator lights on the switch should blink quickly, indicating it is ready for Wi-Fi connection in Default Normal Mode.
Figure 5: Replacing a traditional switch with the smart touch switch.
7. Configurarea și asocierea aplicației
To control your smart switch via smartphone, download the 'Smart Life' app from the App Store (iOS) or Google Play (Android).
- Descărcați și înregistrați: Install the 'Smart Life' app and register an account.
- Adăugați dispozitiv: Open the app, tap '+' or 'Add Device', and select 'Light Switch' or 'Electrical Switch'.
- Confirm Indicator Status: Ensure the indicator light on your switch is blinking quickly. If not, you may need to reset the device.
- Conectați-vă la Wi-Fi: Follow the in-app instructions to connect the switch to your 2.4GHz Wi-Fi network. Enter your Wi-Fi password when prompted.
- Redenumirea dispozitivului: Once connected, you can rename the switch for easier identification (e.g., "Living Room Light").
Resetarea dispozitivului:
If the indicator lights are not blinking quickly, or if you need to reset the switch for any reason:
- Press and hold any button on the switch for approximately 20 seconds until the indicator light blinks quickly. This puts the device into Default Normal Mode for Wi-Fi connection.
- If the indicator light blinks very slowly after holding for 20 seconds, it is in AP (Access Point) mode. This is an alternative pairing mode if Default Normal Mode fails.
Video 1: Demonstrates how to reset or unlock the device by pressing and holding a button for 20 seconds, showing the indicator light changes for different pairing modes.
Figure 6: Remote control via mobile application.
8. Funcționare
Once installed and paired with the 'Smart Life' app, you can operate your switch in several ways:
- Manual Touch: Simply touch the glass panel to turn the connected light or appliance on or off.
- Controlul aplicației: Use the 'Smart Life' app on your smartphone to remotely turn the switch on or off from anywhere with an internet connection.
9. Integrarea controlului vocal
The MOES Smart Switch is compatible with Amazon Alexa and Google Assistant for convenient voice control.
- Link 'Smart Life' Account: In your Amazon Alexa or Google Home app, search for the 'Smart Life' skill/action and enable it.
- Log in: Log in with your 'Smart Life' account credentials.
- Descoperiți dispozitive: După conectare, roagă Alexa sau Asistentul Google să „Descopere dispozitive” sau inițiază manual descoperirea dispozitivelor în aplicațiile respective.
- Comenzi vocale: You can now use voice commands such as "Alexa, turn on [device name]" or "Hey Google, turn off [device name]". Use the names you assigned in the 'Smart Life' app.
Figura 7: Control vocal cu Alexa și Google Home.
10. Funcția de sincronizare
The 'Smart Life' app allows you to set schedules and timers for your smart switch, automating your lighting or appliances.
- Creați programe: In the 'Smart Life' app, navigate to the device settings and select 'Schedule' or 'Timer'.
- Set On/Off Times: Configure specific times for the switch to turn on or off. You can set daily, weekly, or custom schedules.
- Automatizare răsărit/apus: Some app versions allow for automation based on local sunrise and sunset times.
Figure 8: Setting schedules via the Smart Life app.
11. Depanare
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Comutatorul nu răspunde la atingere. | No power, incorrect wiring, or device locked. | Check circuit breaker. Verify wiring (Live, Neutral, Load). Perform a device reset (hold button for 20 seconds). |
| Nu se poate conecta la Wi-Fi. | Incorrect Wi-Fi band (5GHz), weak signal, incorrect password, or device not in pairing mode. | Ensure your router is broadcasting a 2.4GHz signal. Move closer to the router. Double-check Wi-Fi password. Reset the switch to enter pairing mode (blinking indicator). Try AP mode if normal mode fails. |
| Comanda vocală nu funcționează. | 'Smart Life' skill not enabled, incorrect device name, or no internet connection. | Ensure the 'Smart Life' skill is enabled and linked in your Alexa/Google Home app. Verify device names match. Check internet connectivity. |
| Switch goes offline frequently. | Weak Wi-Fi signal, network congestion, or router issues. | Improve Wi-Fi signal strength (e.g., Wi-Fi extender). Reduce network congestion. Restart your router. |
12. Întreținere
- curatenie: Gently wipe the glass panel with a soft, dry cloth. Avoid abrasive cleaners or solvents.
- Actualizări firmware: Periodically check the 'Smart Life' app for available firmware updates to ensure optimal performance and security.
13. Garanție și asistență
For warranty information or technical support, please refer to the documentation provided with your purchase or contact MOES customer service directly. Contact details can typically be found on the MOES official website or within the 'Smart Life' app's support section.
Videoclipul 2: Terminatview of MOES smart home products and their integration, demonstrating various smart life features like color temperature control, music sync lighting, and smart automation based on environmental sensors.
