1. Introducere
The Einhell CE-JS 18 Power Station Jump Starter is a compact and portable device designed to provide emergency jump-starting assistance for vehicles and serve as a portable power bank for various electronic devices. Equipped with a powerful lithium-polymer battery, it offers reliable performance for both automotive and personal charging needs. This manual provides essential information for safe and effective use, maintenance, and troubleshooting of your device.
2. Instrucțiuni de siguranță
WARNING: Read all safety warnings and instructions before using this product. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.
- Purtați întotdeauna ochelari de protecție și mănuși de protecție atunci când lucrați cu baterii.
- Ensure adequate ventilation when jump-starting.
- Do not smoke or allow sparks or flames near the battery or jump starter.
- Connect the jumper cables with correct polarity: ROȘU (+) to positive, NEGRU (-) to negative. Incorrect connection can cause damage or injury.
- Nu încercați să porniți o baterie înghețată.
- Țineți aparatul departe de copii.
- Nu expuneți dispozitivul la ploaie sau în condiții umede.
- Do not disassemble the unit. Contact qualified service personnel for repairs.
3. Conținutul pachetului
Carefully unpack the device and check for completeness. The package should contain the following items:
- Einhell CE-JS 18 Power Station Jump Starter Unit
- Jumper cables with insulated clamps și protecție la suprasarcină
- 230V power supply cable for charging the unit
- Protective and storage bag
- Various adapter cables for charging mobile devices (USB, 12V, 19V outputs)
Image: Einhell CE-JS 18 Jump Starter unit with all included accessories, including jumper cables, various charging adapters, and a power supply cable.
4. Produs terminatview
The Einhell CE-JS 18 is a versatile device featuring multiple functionalities:
- Port de pornire rapidă: For connecting the jumper cables to start a vehicle.
- Lumină de lucru cu LED: Integrated LED for illumination, strobe, and SOS signal functions.
- Ieșiri USB: Two USB ports (5V/2A and 5V/9V fast charge) for charging smartphones, tablets, and other USB-powered devices.
- Ieșire 12V/10A: Pentru alimentarea dispozitivelor de 12V.
- Ieșire 19V/3.5A: For charging laptops and other compatible devices.
- Indicator de stare a bateriei: LEDs to show the remaining charge level of the internal battery.
Imagine: Un prim-plan view of the Einhell CE-JS 18 unit, highlighting the integrated LED flashlight and the two USB output ports.
5. Configurare
5.1 Charging the Jump Starter Unit
Before first use, fully charge the Einhell CE-JS 18 unit. It is recommended to fully charge the unit after each use and at least every three months to maintain battery health.
- Connect the provided 230V power supply cable to the charging input port on the jump starter.
- Conectați sursa de alimentare la o priză standard de perete.
- The battery status indicator LEDs will illuminate to show the charging progress.
- Charging typically takes approximately 6 hours for a full charge from empty. All indicator LEDs will be solid when fully charged.
- Once fully charged, disconnect the power supply cable from the unit and the wall outlet.
6. Instrucțiuni de utilizare
6.1 Pornirea cu sarcină a unui vehicul
The CE-JS 18 is suitable for jump-starting petrol engines up to 8000 ccm and diesel engines up to 5000 ccm.
- Ensure the jump starter unit is sufficiently charged (at least 75% indicated by LEDs).
- Opriți contactul vehiculului și toate accesoriile (lumini, radio etc.).
- Conectați ROȘU (+) clamp of the jumper cable to the positive terminal of the vehicle's battery.
- Conectați NEGRU (-) clamp of the jumper cable to a solid, unpainted metal part of the vehicle's engine block or chassis, away from the battery and fuel lines.
- Plug the jumper cable connector into the jump start port on the Einhell CE-JS 18 unit.
- Start the vehicle's engine. If it doesn't start immediately, wait 30 seconds and try again. Do not crank for more than 3 seconds per attempt.
- Once the vehicle starts, immediately disconnect the jumper cable connector from the Einhell unit.
- Apoi, deconectați NEGRU (-) clamp from the vehicle chassis, followed by the ROȘU (+) clamp de la borna bateriei.
Image: A person connecting the red positive jumper cable clamp to a car battery, with the Einhell CE-JS 18 unit placed nearby on the engine bay.
Image: A five-step diagram showing the correct sequence for connecting and disconnecting the jump starter to a vehicle battery.
6.2 Încărcarea dispozitivelor mobile
The Einhell CE-JS 18 can charge various electronic devices using its USB, 12V, and 19V outputs.
- Încărcare USB: Use the appropriate USB cable (not always included) to connect your smartphone, tablet, or other USB device to either the 5V/2A or 5V/9V (fast charge) USB output port.
- Ieșire 12V/10A: Connect compatible 12V devices using the provided adapter cable.
- Ieșire 19V/3.5A: Connect compatible laptops or other devices using the provided adapter cable and appropriate tip.
Image: The Einhell CE-JS 18 unit connected to and charging a smartphone, tablet, and laptop, demonstrating its versatility as a power bank.
7. Întreținere
Proper maintenance ensures the longevity and optimal performance of your Einhell CE-JS 18.
- curatenie: Ștergeți unitatea cu o cârpă uscată și moale. Nu utilizați substanțe de curățare abrazive sau solvenți.
- Depozitare: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the unit is fully charged before storing for extended periods.
- Îngrijirea bateriei: Recharge the unit every three months, even if not in use, to prevent deep discharge and prolong battery life.
8. Depanare
If you encounter issues with your Einhell CE-JS 18, refer to the following common problems and solutions:
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Vehiculul nu pornește | Low charge on jump starter; Incorrect cable connection; Vehicle battery completely dead; Engine size exceeds capacity. | Recharge the jump starter; Check polarity and connection points; Allow more time for charging or seek professional assistance; Verify engine size compatibility. |
| Mobile device not charging | Low charge on jump starter; Incorrect cable/adapter; Device not compatible. | Recharge the jump starter; Ensure correct cable and adapter are used; Check device compatibility with output voltages. |
| Lumina LED nu funcționează | Low charge on jump starter; Malfunction. | Recharge the jump starter; If problem persists, contact customer support. |
If the problem persists after attempting these solutions, please contact Einhell customer support.
9. Specificații
Detailed technical specifications for the Einhell CE-JS 18 Power Station Jump Starter:
- Model: CE-JS 18
- Producător: Einhell
- Tip baterie: Litiu-polimer
- Capacitate baterie: 3 x 6000 mAh (Total 18000 mAh)
- Jump Start Voltage: 12 V
- Curentul de vârf: 600 A
- Start curent: 300 A (for 5 seconds)
- Timp de încărcare: Aproximativ. 6 ore
- Ieșire USB 1: 5 V / 2 A
- Ieșire USB 2: 5 V / 9 V (Fast Charge)
- Ieșire DC 1: 12 V / 10 A
- Ieșire DC 2: 19 V / 3.5 A
- Greutate: 1.34 kg
- Dimensiuni (L x l x H): 24.3 x 9.2 x 3 cm
- Suitable for Petrol Engines: Up to 8000 ccm
- Suitable for Diesel Engines: Up to 5000 ccm
- Număr piesa: 1091531
10. Garanție și asistență
Einhell products are manufactured to high-quality standards and undergo strict quality controls. This product is covered by the manufacturer's warranty, typically 1 year for parts availability, as per local regulations and purchase terms.
For warranty claims, technical support, or spare parts, please contact your authorized Einhell dealer or visit the official Einhell website for customer service contact information. Please have your proof of purchase and the product model number (CE-JS 18) ready when contacting support.
You can find more information and support at the official Einhell store: Magazinul Einhell
