1. Produs terminatview
The DURATECH Sun Spring 5 kW Swimming Pool Heat Pump is designed to efficiently heat your swimming pool, providing a comfortable swimming experience. This model is suitable for pools up to 12m³.
Caracteristici cheie:
- High energy efficiency with a COP of 5.6.
- Operates effectively in ambient temperatures as low as +10°C.
- Space-saving installation due to its vertical fan design.
- Intuitive and practical control panel with 3 buttons for easy operation.
- Corrosion-resistant titanium heat exchanger for extended durability.
Imagine produs:
This image displays the Sun Spring 5 kW Swimming Pool Heat Pump. It features a compact, vertical design with a control panel showing temperature readings and an air intake grille on the side. The power cord and plug are visible at the base.
2. Informații de siguranță
Please read all safety warnings and instructions carefully before installing, operating, or performing maintenance on the heat pump. Failure to follow these instructions may result in electric shock, fire, serious injury, or death.
- Asigurați-vă că pompa de căldură este instalată de un profesionist calificat, în conformitate cu normele locale de instalații electrice și sanitare.
- Deconectați întotdeauna alimentarea la unitate înainte de a efectua orice service sau întreținere.
- Do not operate the heat pump if any part is damaged or if the power cord is frayed.
- Țineți copiii și animalele de companie departe de unitate în timpul funcționării.
- Asigurați o ventilație adecvată în jurul unității pentru a preveni supraîncălzirea.
- Nu blocați orificiile de admisie sau de evacuare a aerului.
3. Configurare și instalare
Proper installation is crucial for the optimal performance and longevity of your heat pump. Refer to the detailed installation guide provided with your product for specific instructions.
Plasare:
The heat pump should be placed on a solid, level surface, ideally outdoors, with sufficient clearance around it for proper airflow. Avoid enclosed spaces or areas with poor ventilation. The unit dimensions are approximately 45.8 x 47.2 x 53 cm (L x W x H).
Conexiune electrică:
Connect the heat pump to a dedicated electrical circuit as specified in the electrical requirements section of the full manual. Ensure all connections are secure and waterproof.
Conexiune la instalații sanitare:
Connect the heat pump to your pool's filtration system. Water flows from the pool pump, through the heat pump, and back to the pool. Ensure all plumbing connections are tight to prevent leaks.
4. Instrucțiuni de utilizare
The Sun Spring heat pump features an intuitive control panel for easy operation. Follow these steps to begin heating your pool:
- Pornire: Ensure the heat pump is properly connected to power and the pool pump is running.
- Setați temperatura dorită: Use the three buttons on the control panel to navigate the menu and set your desired pool water temperature. The digital display will show the current and target temperatures.
- Monitorizare funcționare: The heat pump will automatically begin heating the water to the set temperature. Allow time for the water to reach the desired warmth, as this can vary based on pool size and ambient conditions.
- Oprire: To turn off the heat pump, use the control panel or disconnect power at the circuit breaker.
5. Întreținere
Regular maintenance ensures the efficiency and longevity of your heat pump. Always disconnect power before performing any maintenance.
- Orificii de aer curat: Periodically inspect and clean the air intake and exhaust vents to ensure they are free from debris, leaves, or other obstructions.
- Verificați debitul de apă: Ensure adequate water flow through the heat pump. Reduced flow can impact performance.
- Inspectați conexiunile: Regularly check electrical and plumbing connections for any signs of wear, corrosion, or leaks.
- winterization: If you live in an area with freezing temperatures, follow proper winterization procedures to protect the unit from ice damage. Consult the full manual for detailed winterization steps.
- Schimbător de căldură: The unit features a corrosion-resistant titanium heat exchanger, requiring minimal internal maintenance.
6. Depanare
Această secțiune oferă soluții pentru problemele comune pe care le puteți întâmpina. Pentru probleme mai complexe, contactați un tehnician calificat.
| Problemă | Cauza posibila | Soluţie |
|---|---|---|
| Pompa de căldură nu pornește. | No power, circuit breaker tripped, or faulty wiring. | Check power supply, reset circuit breaker, ensure proper electrical connections. |
| Apa nu se încălzește suficient. | Low ambient temperature, insufficient water flow, or dirty air vents. | Ensure ambient temperature is above +10°C, check pool pump operation, clean air vents. |
| Zgomot neobișnuit de la unitate. | Debris in fan, loose components, or compressor issue. | Inspect for debris, tighten any loose parts. If noise persists, contact service. |
7. Specificații
Detailed technical specifications for the DURATECH Sun Spring 5 kW Heat Pump:
| Numărul de model | SOARELE 05 |
| Producător | Duratech |
| Dimensiuni produs (L x l x H) | 45.8 x 47.2 x 53 cm |
| Greutatea produsului | 28 kilograme |
| Tip de energie | AC |
| ASIN | B07BHNTLRT |
| Data Primei Disponibilități pe Amazon.com.be | 24 noiembrie 2021 |
| Disponibilitatea pieselor de schimb | Informații indisponibile |
8. Garanție și asistență
For warranty information, please refer to the documentation included with your purchase or contact DURATECH customer service. Information regarding the availability of spare parts is currently unavailable.
For technical support or service inquiries, please visit the official DURATECH website or contact their authorized service centers. Always provide your model number (SUN 05) and purchase date when seeking support.
