BEEPER XR5-TX1

Manual de utilizare al alarmei auto universale BEEPER XR5-TX1

Model: XR5-TX1

1. Introducere

The BEEPER XR5-TX1 is a universal car alarm system designed to provide enhanced security for your vehicle. This system utilizes RFID radio transmission for communication between its components, simplifying installation and ensuring reliable operation. It is 100% universal and compatible with multiplex systems, making it suitable for a wide range of vehicles.

2. Produs terminatview și Componente

The BEEPER XR5-TX1 system includes the following main components:

BEEPER XR5-TX1 Universal Car Alarm components: siren, two remote controls, and an infrasonic sensor.

Figure 2.1: Main components of the BEEPER XR5-TX1 Universal Car Alarm system.

Labeled components of the BEEPER XR5-TX1 system, showing the alarm siren, two remote controls, and the infrasonic sensor.

Figura 2.2: Detaliat view of the alarm siren, remote controls, and infrasonic sensor.

3. Caracteristici cheie

Diagram illustrating RFID wireless transmission between the alarm siren, remote controls, and infrasonic sensor.

Figure 3.1: RFID wireless communication between alarm components.

Image of a person covering their ears, indicating the loud 118dB alarm sound.

Figure 3.2: The alarm siren produces a powerful 118dB sound.

Diagram showing the central alarm unit surrounded by various compatible modules, indicating expandability up to 8 connected modules.

Figure 3.3: The system supports connection of up to 8 additional modules.

Illustrations of different vehicle types (car, convertible, camper van, utility vehicle) with the alarm system, showing its adaptability.

Figure 3.4: The alarm system is adaptable for various vehicle types.

4. Configurare și instalare

Installation of the BEEPER XR5-TX1 is designed to be straightforward and typically takes around 15 minutes. Follow these steps:

  1. Connect the Siren Unit: The siren unit requires only two connections: a red wire to the 12V permanent positive (+) terminal of the vehicle battery and a black wire to the negative (-) or ground terminal of the vehicle battery.
  2. Position the Infrasonic Sensor: Place the infrasonic sensor into the vehicle's cigarette lighter socket. This sensor connects wirelessly to the main siren unit.

Ensure all connections are secure and the siren unit is mounted in a safe, discreet location within the engine bay or vehicle interior.

Diagram showing the simple two-wire connection for the alarm siren to a car battery.

Figure 4.1: Simple two-wire connection for the siren unit.

5. Funcționare

The BEEPER XR5-TX1 offers both manual and automatic operation modes.

5.1 Funcții de control de la distanță

The two included remote controls allow for manual control of the alarm system.

Two BEEPER remote controls, each with power and alarm buttons.

Figure 5.1: The two-button remote controls for the alarm system.

5.2 Automatic Activation (Hands-Free Access)

The system can automatically arm and disarm based on the proximity of the remote control:

Illustration showing a person walking away from a car, with a clock indicating automatic activation after 30 seconds when 15-20 meters away.

Figure 5.2: Automatic activation of the alarm when moving away from the vehicle.

5.3 Infrasonic Sensor Operation

The infrasonic sensor detects changes in air pressure inside the vehicle, such as when a door is opened or a window is broken. This sensor is wirelessly connected to the main unit.

Close-up image of the infrasonic detector plugged into a car's cigarette lighter socket, with a red indicator light.

Figure 5.3: The infrasonic detector plugs into the cigarette lighter.

6. Întreținere

To ensure optimal performance of your BEEPER XR5-TX1 alarm system, consider the following maintenance points:

7. Depanare

If you encounter issues with your BEEPER XR5-TX1 alarm system, refer to the following common problems and solutions:

ProblemăCauza posibilaSoluţie
Alarm is oversensitive and triggers frequently.Infrasonic sensor sensitivity set too high. External vibrations (e.g., loud vehicles, strong winds).Adjust the sensitivity of the infrasonic sensor to a lower setting. Refer to the sensor's instructions for specific adjustment procedures.
Alarm triggers randomly without apparent cause.Faulty sensor, low battery in remote or sensor, interference.Check and replace remote control batteries. Ensure infrasonic sensor is charged. If problem persists, contact support.
Telecomanda nu răspunde.Low or dead remote control batteries. Out of range.Replace the two CR2032 batteries in the remote control. Ensure you are within the operational range (approx. 10m for disarming).
Alarm does not arm/disarm automatically.Remote control not carried with user. Interference.Ensure the remote control is with you when approaching or leaving the vehicle. Check for strong radio interference in the area.

8. Specificații

CaracteristicăCaietul de sarcini
ModelXR5-TX1
Numărul piesei producătoruluiXRA1025
Nivelul de zgomot al sirenei118 dB
Power Supply (Siren)12V DC (Vehicle Battery)
Baterii pentru telecomandă2 x CR2032 (per remote)
Infrasonic Sensor AutonomyApprox. 6 days (off-charger)
Dimensiunile produsului14 x 7 x 8 cm
Greutatea articolului390 g
GTIN (Număr global de identificare comercială)03661546102763

9. Garanție și asistență

The BEEPER XR5-TX1 Universal Car Alarm comes with a 3 an garanție from the date of purchase. This warranty covers manufacturing defects and ensures the product's proper functioning under normal use.

For technical assistance, troubleshooting not covered in this manual, or warranty claims, please contact BEEPER customer support. Support is typically available and responsive within 24 hours.

Manufacturer: Ixit Beeper

Documente conexe - XR5-TX1

Preview Beeper XRAY XR5 Alarme Auto Universale - Ghid de instalare și utilizare
Découvrez le système d'alarme universelle pour voiture Beeper XRAY XR5. Ce guide complet détaille la composition du kit, l'installation, le codage des modules, l'utilisation et le dépannnage pour une sécurité optimale de votre véhicule.
Preview Beeper XRAY Capteur Anti-Soulèvement: Ghid de instalare și utilizare
Manual de instalare și utilizare a senzorului anti-soulèvement Beeper XRAY. Descoperiți comentariul de instalare și reglați sistemul de securitate pentru vehicul, incluzând senzorii de șoc și de inclinare. Vizitați www.beeper.fr pentru mai multe informații.
Preview Sisteme de alarmă auto Beeper XRAY: Soluții complete de securitate
Descoperiți gama Beeper XRAY de sisteme de alarmă auto universale, care oferă funcții avansate de securitate, precum detectarea șocurilor, protecția perimetrală, accesul fără cheie și integrarea smartphone-ului. Găsiți alarma perfectă pentru vehiculul dumneavoastră.
Preview Beeper XR5-BR433 Quick Start Guide & Installation
Concise guide for installing and using the Beeper XR5-BR433 vehicle tracking and alarm system. Includes technical data, safety instructions, and warranty information.
Preview Sistem de alarmă universal Beeper XRAY XR2: Manual de instalare și utilizare
Manual de instalare și utilizare pentru sistemul de alarmă universal Beeper XRAY XR2. Acoperă configurarea, funcționarea, caracteristicile, datele tehnice și asistența pentru securitatea mașinilor și motocicletelor.
Preview Ghid de pornire rapidă pentru sistemul de alarmă auto Beeper XR5
Un ghid rapid de utilizare a sistemului de alarmă auto Beeper XR5, care acoperă instalarea, instrucțiunile de siguranță, datele tehnice și informațiile despre garanție. Disponibil în mai multe limbi, inclusiv engleză, franceză, spaniolă, germană, italiană, olandeză și portugheză.