Fender Monterey Bluetooth Speaker Instruction Manual

1. Produs terminatview

The Fender Monterey Bluetooth Speaker delivers clear, powerful audio with a design inspired by classic Fender amplifiers. This speaker is engineered for high-fidelity sound reproduction, featuring 120 watts of power, two woofers, and two tweeters. It supports audio streaming via Bluetooth and direct connection through a 3.5mm auxiliary jack or RCA inputs.

Figura 1: Față view of the Fender Monterey Bluetooth Speaker, showcasing its classic amplifier-inspired grille and Fender logo.

2. Ce se află în cutie

Verificați dacă toate articolele enumerate mai jos sunt incluse în pachetul dumneavoastră:

• Fender Monterey Bluetooth Speaker
• Cablu auxiliar de 3.5 mm
• RCA prin cablu
• Cablu de alimentare

3. Ghid de instalare

3.1 Conexiune la alimentare

1. Ensure the speaker's volume control is set to minimum before connecting power.
2. Conectați cablul de alimentare furnizat la intrarea CA de pe panoul din spate al difuzorului.
3. Plug the other end of the power cable into a suitable wall outlet (100-240V, 50/60Hz).
4. Flip the power switch on the top panel to the "ON" position. The speaker will emit a chime indicating it is powered on.

Figure 2: Rear panel of the Fender Monterey speaker, showing the power input and auxiliary connections.

3.2 Asociere Bluetooth

1. Cu difuzorul pornit, apăsați butonul PERECHE button on the top panel. The Bluetooth indicator light will begin to flash, indicating it is in pairing mode.
2. Pe dispozitivul audio (smartphone, tabletă, computer), navigați la setările Bluetooth.
3. Select "Fender Monterey" from the list of available devices.
4. Once successfully paired, the Bluetooth indicator light on the speaker will turn solid blue, and a confirmation chime will sound.

3.3 Auxiliary Input Connection

For devices without Bluetooth, use the provided 3.5mm auxiliary cable or RCA cable.

• 3.5mm Aux: Connect one end of the 3.5mm cable to your audio device's headphone jack and the other end to the MINI input on the speaker's top panel.
• RCA: Connect the RCA cable to your audio device's RCA outputs and the other end to the RCA inputs on the speaker's rear panel.

Select the appropriate source (BLUETOOTH, MINI, sau RCA) folosind SURSĂ butonul de pe panoul superior.

Figure 3: Top panel controls of the Fender Monterey speaker, including Volume, Treble, Bass, Source, and Pair buttons.

4. Instrucțiuni de utilizare

4.1 Redare audio

1. Ensure your audio source is connected and selected (Bluetooth, Mini, or RCA).
2. Start playing audio from your connected device.
3. Reglați VOLUM knob on the speaker's top panel to your desired listening level.

4.2 Controale de ton

The Fender Monterey speaker features dedicated controls for customizing your sound:

• TRIPLA: Adjusts the high-frequency response of the audio. Turn clockwise for brighter sound, counter-clockwise for warmer sound.
• BAS: Adjusts the low-frequency response of the audio. Turn clockwise for more bass, counter-clockwise for less bass.
• FORMĂ: A toggle switch located on the rear panel. This control modifies the overall tonal character, offering different sound profiles. Experiment with both positions to find your preferred sound.

5. Întreținere

• curatenie: Use a soft, dry cloth to clean the speaker's exterior. Avoid abrasive cleaners, solvents, or sprays that may damage the finish.
• Depozitare: Când nu este utilizată pentru perioade lungi de timp, depozitați difuzorul într-un loc răcoros și uscat, ferit de lumina directă a soarelui și de temperaturi extreme.
• Ventilare: Ensure proper ventilation around the speaker to prevent overheating. Do not block any ventilation openings.
• Expunerea la lichid: Keep the speaker away from liquids. In case of accidental spills, immediately disconnect power and allow it to dry completely before re-use.

6. Depanare

Fără putere

• Ensure the power cable is securely connected to both the speaker and a working wall outlet.
• Verify the power switch on the top panel is in the "ON" position.
• Verificați dacă priza de perete funcționează conectând un alt dispozitiv.

Fără sunet

• Confirm the correct audio source (Bluetooth, Mini, or RCA) is selected using the SURSĂ buton.
• Creșteți VOLUM knob on the speaker and the volume on your connected audio device.
• If using Bluetooth, ensure the device is properly paired and connected. Try re-pairing if necessary.
• If using auxiliary inputs, ensure cables are fully inserted and not damaged.

Probleme de asociere Bluetooth

• Ensure the speaker is in pairing mode (flashing Bluetooth indicator). Press the PERECHE button if it's not flashing.
• Move your audio device closer to the speaker to ensure it's within range.
• Turn off and on the Bluetooth function on your audio device.
• If the speaker was previously paired with another device, disconnect it from that device first.

7. Specificatii tehnice

Figure 4: Dimensions of the Fender Monterey Bluetooth Speaker.

8. Garanție și asistență

For warranty information, product registration, or technical support, please refer to the official Fender website or contact Fender customer service. Keep your proof of purchase for warranty claims.

Resurse online: fender.com