Hama 207-54 Glitter Mix Midi Beads Instruction Manual

1. Produs terminatview

The Hama 207-54 Glitter Mix Midi Beads set provides a creative outlet for individuals aged 5 and above. This package contains 3 bags, each with 1000 midi-sized beads, totaling 3000 pieces. These beads are designed to be placed on a pegboard and then fused together with heat, creating various designs and figures. The activity promotes fine motor skills and encourages imaginative play.

Caracteristicile cheie includ:

• 3000 glitter mix midi beads (3 x 1000 pieces).
• Encourages creativity and imaginative design.
• Dezvolta abilitatile motorii fine si coordonarea mana-ochi.
• Suitable for mess-free play when used correctly.
• Recommended for ages 5 years and older.

2. Informații de siguranță

Vă rugăm să citiți și să înțelegeți toate avertismentele de siguranță înainte de a utiliza acest produs.

• AVERTISMENT: PERICOL DE SUFOCARE - Piese mici. Nu este potrivit pentru copiii sub 3 ani.
• Acest produs este recomandat copiilor cu varsta de peste 5 ani.
• Adult supervision is required during the ironing process to prevent burns and ensure proper bead fusion.
• Keep beads away from infants and toddlers to avoid accidental ingestion.
• Nu înghițiți mărgelele.
• Ensure adequate ventilation when ironing beads.

3. Configurare și operare

To begin creating with Hama Midi Beads, you will need a Hama pegboard (sold separately) and ironing paper (included in most Hama sets or sold separately), in addition to the beads themselves. An iron is also required for the fusing process.

Instrucțiuni pas cu pas:

1. Așezați mărgelele pe placa perforată: Arrange the Hama Midi Beads on a Hama pegboard according to your desired design. Ensure each bead is firmly seated on a peg.
   

   Image showing a hand carefully placing individual Hama beads onto a pegboard to create a colorful pattern. This illustrates the initial design phase.

2. Iron the Design (Adult Supervision Required): Once your design is complete on the pegboard, place a sheet of Hama ironing paper over the beads. Using a household iron set to a medium-hot temperature (no steam), gently iron the beads in a circular motion for a few seconds. The heat will fuse the beads together. Continue ironing until the beads are visibly fused.
   

   Image depicting an iron being used over ironing paper placed on top of Hama beads on a pegboard. This shows the fusing process.

3. Remove from Pegboard: Carefully remove the ironing paper. Allow the fused design to cool completely before gently peeling it off the pegboard. If the design is still warm, it may warp or break. For best results, place a heavy object on the design while it cools to ensure it remains flat.
   

   Image illustrating a hand carefully lifting a completed and fused Hama bead design from the pegboard, revealing the finished craft.

Sfat: You can iron both sides of the design for extra durability, but ensure the first side is fully cooled before flipping.

4. Întreținere

• Depozitare: Store Hama beads in their original packaging or in sealed containers to prevent mixing and loss. Keep them in a cool, dry place away from direct sunlight.
• Curățarea plăcilor perforate: Pegboards can be cleaned with a damp cloth if they become dusty or dirty. Avoid harsh chemicals that may damage the plastic.
• Hârtie de călcat: Ironing paper can be reused multiple times until it becomes too worn or discolored. Replace it when necessary to ensure proper bead fusion and prevent sticking.

5. Depanare

• Beads not fusing: Ensure the iron is hot enough and you are applying even pressure. Iron for a slightly longer duration. Make sure the ironing paper is correctly placed.
• Design warping/breaking: Allow the design to cool completely before removing it from the pegboard. Placing a heavy book on top while cooling can help keep it flat. Ensure beads are sufficiently fused.
• Beads sticking to ironing paper: The iron might be too hot, or the ironing paper might be worn out. Reduce iron temperature or replace the paper.
• Pegboard melting: This indicates the iron is too hot or has been held in one spot for too long. Reduce iron temperature and keep the iron moving.

6. Specificații

7. Garanție și asistență

Hama products are manufactured to high-quality standards. For specific warranty information or customer support, please refer to the official Hama website-ul web sau contactați distribuitorul. Păstrați dovada achiziției pentru orice reclamații în garanție.

Pentru asistență suplimentară, puteți vizita Oficial Hama website-ul.