2.4GHz 4-Zone LED Controller Instruction Manual

Introducere

This manual provides detailed instructions for the installation, operation, and maintenance of your 2.4GHz 4-Zone LED Controller. This versatile remote control is designed to manage single color, CCT (Correlated Color Temperature), and RGBCCT LED lighting systems, offering flexible control over brightness, color, and color temperature across up to four independent zones.

Produs terminatview

The 2.4GHz 4-Zone LED Controller comes in various models, each tailored for specific lighting control needs:

• RC01RF/RC01RFB: Single Color LED Control
• RC02RF/RC02RFB: CCT (Color Temperature Adjustable) LED Control
• RC03RF/RC03RFB: RGBCCT (RGB + Color Temperature Adjustable) LED Control

These remotes allow for individual or synchronized control of multiple LED controllers, enhancing your lighting experience.

Figure 1: Various 2.4GHz 4-Zone LED Remote Controller Models

Specificații

Figure 2: Remote Control and Holder Dimensions

Figura 3: Certificări de produs

Conținutul pachetului

Vă rugăm să verificați pachetul pentru următoarele articole:

• 2.4GHz 4-Zone LED Remote Controller (Specific model as ordered)
• Suport pentru montare pe perete
• Șuruburi de montare (de obicei 2)
• (LED controllers and light strips are sold separately)

Figure 4: Remote Control with Wall Mount Holder and Screws

Configurare și instalare

1. Instalarea bateriei

1. Deschideți capacul compartimentului bateriei din spatele telecomenzii.
2. Introduceți două baterii AAA, asigurându-vă că polaritatea este corectă (+/-).
3. Închideți capacul compartimentului bateriei.

2. Montarea suportului telecomenzii

1. Choose a suitable location for the wall mount holder.
2. Use the provided screws to securely attach the holder to the wall.
3. Place the remote control into the mounted holder for convenient access.

3. Wiring Diagram for LED Controllers

Ensure your LED strips are correctly connected to the appropriate LED controllers (e.g., RGBCCT controllers for RGBCCT strips). The remote communicates wirelessly with these controllers.

Figure 5: 4-Channel Dimming Remote Wiring Diagram

4. Pairing the Remote with LED Controllers

While specific pairing instructions may vary slightly depending on the LED controller model, a common method involves:

1. Power on the LED controller(s) you wish to pair.
2. Within a few seconds of powering on, press one of the 'Zone' buttons (1, 2, 3, or 4) on the remote control.
3. The connected LED strip should flash a few times to indicate successful pairing.
4. Repeat for other zones/controllers as needed.

5. Simultaneous Auto-Transmission

The remote control supports auto-transmission, meaning the signal can be relayed between controllers. If a controller is installed within 30 meters of another controller, the signal can be transmitted, extending the effective control distance beyond the remote's direct range.

Figure 6: Simultaneous Auto-Transmission Functionality

Instrucțiuni de operare

The remote control offers intuitive buttons for various lighting adjustments. The exact functions of some buttons may vary slightly depending on whether you have a Single Color, CCT, or RGBCCT remote.

Common Button Functions (All Models)

• PE: Press to turn ON all linked devices.
• OPRIT: Press to turn OFF all linked devices.
• Brightness Slider/Buttons: Touch the slider or use the 'S+' / 'S-' buttons to adjust brightness from 1% to 100%. Specific buttons may also set 30%, 60%, or 100% brightness.
• M (mod): Press to switch between dynamic modes repeatedly.
• S- / S+: Lower or accelerate the dynamic mode speed.
• Butoane de zonă (1, 2, 3, 4): Select a specific zone to control individually. Long press a zone button to link/unlink a controller to that zone.

Specific Button Functions by Model

RC01RF/RC01RFB (Single Color Remote)

Figure 7: Single Color Remote Button Functions

RC02RF/RC02RFB (CCT Remote)

• Color Temperature Ring: Touch the slider to dim the brightness from 1%-100% and adjust color temperature.
• W (White): Press to switch between cool white, nature white, and warm white repeatedly.

Figure 8: CCT Remote Button Functions

Figure 9: Color Temperature Adjustment

RC03RF/RC03RFB (RGBCCT Remote)

• Inel de culoare: Atingeți inelul de culoare pentru a schimba culorile.
• Butoane de culoare: Short press to switch pure colors (orange, yellow, green, cyan, blue, purple, red) repeatedly. Long press to switch pure colors gradually.
• W (White): Press to get white light.
• W- / W+: Under white light mode, press to change white light to cold white or warm white. Under color light mode, press to reduce or add saturation.

Figure 10: RGBCCT Remote Button Functions

Figure 11: Multi-Color Adjustment

Figura 12: Reglarea luminozității

Figure 13: Separate Control in 4 Groups

Sfaturi pentru utilizatori

• For optimal control range, ensure there are no major obstructions between the remote and the LED controllers.
• Regularly check and replace the AAA batteries to ensure consistent performance.
• When setting up multiple zones, it's often easiest to pair one controller at a time to a specific zone before connecting others.
• Utilize the wall mount holder to keep your remote accessible and prevent misplacement.

Depanare

Telecomanda nu răspunde

• Verificați bateriile: Asigurați-vă că bateriile sunt introduse corect și nu sunt descărcate. Înlocuiți-le dacă este necesar.
• Gamă: Make sure the remote is within the 30-meter control distance of the LED controller.
• Obstrucții: Remove any large metal objects or walls that might be blocking the signal.
• Repara: Try re-pairing the remote with the LED controller as described in the 'Setup and Installation' section.

Lights Not Changing Color/Brightness

• Correct Remote Model: Ensure you are using the correct remote model (Single Color, CCT, or RGBCCT) for your LED strips and controllers. An RGBCCT remote cannot control a single color strip's color, for example.
• Compatibilitatea controlerului: Verify that your LED controllers are compatible with the remote's functions (e.g., a CCT remote requires a CCT-compatible controller).
• Cablaj: Double-check the wiring between the LED strips and the controller. Incorrect wiring can prevent certain functions from working.

Interferență

• If you experience intermittent control, other 2.4GHz devices in the vicinity might be causing interference. Try to minimize other wireless activity or reposition devices.

Întreţinere

• curatenie: Ștergeți telecomanda cu o lavetă moale și uscată. Nu folosiți substanțe de curățare abrazive sau solvenți.
• Depozitare: Store the remote in a cool, dry place when not in use for extended periods. Remove batteries if storing for several months to prevent leakage.
• Evitați umezeala: Keep the remote away from water and high humidity to prevent damage.

Garanție și suport

Acest produs vine cu un 2 an garanție de la data achiziției, acoperind defectele de fabricație. Vă rugăm să păstrați dovada achiziției pentru reclamațiile în garanție.

For technical support, troubleshooting assistance, or warranty inquiries, please contact the seller or retailer from whom you purchased the product. Provide your model number and a detailed description of the issue for faster service.