EAGLE 2 Gas Detector
Product Information
Specifications
- Model: 33-6015RK CO2 Scrubber
- Manufacturer: RKI Instruments, Inc.
- Replacement for: 33-6010RK CO2 Scrubber
- Compatibility: EAGLE & EAGLE 2
- Indicator of Usage: Filter material turns to powder with
diminishing CO2 absorption capacity
Product Usage Instructions
Compatibility
The 33-6015RK CO2 scrubber is compatible with both the EAGLE and
EAGLE 2 models.
Installation
- Ensure the instrument is powered off.
- Locate the CO2 scrubber compartment on the instrument.
- Remove the old CO2 scrubber if present.
- Insert the new 33-6015RK CO2 scrubber into the compartment
securely. - Close the compartment securely.
- Power on the instrument and check for proper functioning.
Mitigating Sensor Readings Interference
If installing a CO2 scrubber affects sensor readings, follow
these steps:
- Obtain a charcoal filter (Part # 33-6092).
- Install the charcoal filter between the CO2 scrubber and the
instrument inlet. - Ensure the charcoal filter is securely in place.
- Recheck sensor readings for accuracy.
Frequently Asked Questions (FAQ)
Q: Why was the 33-6010RK CO2 scrubber discontinued?
A: The 33-6010RK CO2 scrubber was discontinued due to
long-standing production challenges. It has been officially
replaced by the 33-6015RK scrubber.
Q: Is the 33-6015RK compatible with both the EAGLE & EAGLE
2?
A: Yes, the 33-6015RK is compatible with both the EAGLE and
EAGLE 2 models.
Q: Can installing a CO2 scrubber affect sensor readings?
A: Yes, installing a CO2 scrubber on an EAGLE or EAGLE 2 may
affect electrochemical (EC) sensor readings if an EC sensor is
installed in the instrument.
Q: What should be done if EC sensor readings are affected?
A: If sensor readings are impacted, a charcoal filter (Part #
33-6092) should be installed between the CO2 scrubber and the
instrument inlet to mitigate the interference.
RKI Instruments, Inc. 33248 Central Ave, Union City, CA
94587
Website: www.rkiinstruments.com
June 9, 2025
EAGLE 2 CO2 Scrubber Replacement
Why was the 33-6010RK CO2 scrubber discontinued? A: The 33-6010RK CO2 scrubber was discontinued due to long-standing production challenges. It has been officially replaced by the 33-6015RK scrubber.
What is different about the 33-6010RK CO2 scrubber? A: Unlike its predecessor, the 33-6015RK does not change color to indicate usage. Instead the filter material begins to turn to powder as its CO2 absorption capacity diminishes.
Is the 33-6015RK compatible with both the EAGLE & EAGLE 2?
· EAGLE: The 33-6015RK CANNOT be installed on the CO2 scrubber bracket of the original EAGLE.
· EAGLE 2: The 33-6015RK CAN be installed on the CO2 scrubber bracket.
Are all previous 33-6010RK configurations available with the new 33-6015RK? A: Yes, the 33-6015RK is available in all configurations previously offered by the 33-6010RK.
Can installing a CO2 scrubber affect sensor readings? A: Yes, installing a CO2 scrubber on an EAGLE or EAGLE 2 may affect electrochemical (EC) sensor readings if an EC sensor is installed in the instrument.
What should be done if EC sensor readings are affected? A: If sensor readings are impacted, a charcoal filter (Part # 33-6092) should be installed between the CO2 scrubber and the instrument inlet to mitigate the interference.
RKI Instruments, Inc. 33248 Central Ave, Union City, CA 94587
www.rkiinstruments.com
Documents / Resources
 |
RKI Instruments EAGLE 2 Gas Detector [pdf] Owner's Manual 33-6010RK, 33-6015RK, 33-6092, EAGLE 2 Gas Detector, EAGLE 2, Gas Detector, Detector |