Legal and Reference
LEGAL
Certification Conformity
| Wireless Device | Model | FCC ID | IC ID |
| Autonomy Experience Module | AXM 2.0 | 2AW3A-2NAT23AXM | 26958-2NAT23AXM |
EXPOSURE TO RADIO FREQUENCY ENERGY
Rivian vehicles use Wi-Fi®, Bluetooth® , and cellular radio (LTE/WCDMA/GSM) transmitters that emit radio frequency (RF) energy. Though these devices emit low levels of RF energy, keep a minimum specified distance from the table below between these devices and their antennas to the human body during operation to meet the guidelines for RF exposure from the Federal Communications Commission of the United States (FCC), Industry Canada and European Union.
The devices emitting RF energy used in Rivian vehicles are listed below based on their recommended Maximum Permissible Exposure (MPE) distance.
| Wireless Device | Model | MPE Distance | Antenna Location |
| Autonomy Experience Module |
AXM 2.0 | 20 cm | Instrument Panel |
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. And, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION
Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate this equipment.
Documents / Resources
 |
RIVIAN AXM 2.0 Autonomy Experience Module [pdf] User Guide AXM 2.0, AXM 2.0 Autonomy Experience Module, Autonomy Experience Module, Experience Module, Module |
