RISING E74GNA Controller
Specifications
- Power Supply: 24V+
- Communication Protocols: CAN, Modbus, RSP, E7
- Interface Pins:
- ID – 30PIN
- IF Desc – 21, 22, 23, 24 (POWER, GND, CAN_H, CAN_L)
Product Usage Instructions
Product Interface Description
| ID | IF Desc |
|---|---|
| 21 | POWER |
| 22 | GND |
| 23 | CAN_H |
| 24 | CAN_L |
After being powered on, this product can collect data via CAN communication and upload the collected data to the cloud platform.
Product Interface Description
| ID | IF Desc | Spec Desc |
| 21 | POWER | 24V+ |
| 22 | GND | V- |
| 23 | CAN_H | CAN |
| 24 | CAN_L | CAN |
| 30PIN | 4PIN | |
| 1 | 21 | 1 |
| 2 | 22 | 2 |
| 3 | 23 | 3 |
| 4 | 24 | 4 |
Lights Description
Bluetooth Light (Blue):
- Connected: Constantly lit
- Disconnected: Not lit
Positioning Light (Green):
- Positioned: Constantly lit
- Not Positioned: Flashing
Network Light (Red):
- Connected to Network and MQTT: Flashing
- No Network or Not Connected to MQTT: Not lit
Please take notice that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontroled environment. This equipment should be instaled and operated with minimum distance 20cm between the radiator & your body.
Documents / Resources
 |
RISING E74GNA Controller [pdf] User Manual E74GNA, E74GNA Controller, Controller |