RIOUSV BLK-1200Mbps Wireless Range Extender User Manual
Plug In your wlfl extender and walt for 30s
Until the 2 lights(2.4G and SG) both on means able to start setting
- If Abnormal, please reset: Press and hold the “Reset/WPS” or “Reset” key for 8 seconds and then release it. Wait until the 2.4G and 5G lights are on to indicate a successful reset.
Connect your extender SSID
Both 2.4G and 5G are available, choose 5G to setting
NOTE Please remember to turn off your mobile network data. You have no access to Internet until you finish all setting steps, If your phone prompts that the network cannot be connected, click to continue.
NOTE: Jump to step 3 after step 2 If you click connect on the phone, no jumping interface will appear. You can manually enter the URL • 192.168.188.1 • in the browser.
Scan and select your host router to connects
Entre the password of your host router
Note pls sure of the right password(special character are not allowed like ~’,blank <>.
Set your extender SSID and password
Note If you don’t want to modify you can proceed to the next step.
Documents / Resources
 |
RIOUSV BLK-1200Mbps Wireless Range Extender [pdf] User Manual BLK-1200Mbps Wireless Range Extender, BLK-1200Mbps, Wireless Range Extender, Range Extender, Extender |
