Riot MRR Functional Trainer Instruction Manual

Riot MRR Functional Trainer

ASSEMBLY CAUTION

Please carefully read the following information before installation.
Assembly requires at least two people.
Do not tighten all screws before assembly is complete.
Ensure that all accessories are complete. If not, please contact us via email.

If you are missing any parts, or otherwise have any warranty issues, please contact us first.

SHORTCUT:

To enhance your installation process for both speed and convenience, consider removing all accessories from the box, carefully opening the packaging, and arranging everything neatly on the floor. This preparation can streamline your setup experience.

The following tools might help you improve your installation experience

WARNING

Choking hazard. Small parts-Please exercise caution if small children or pets are present.

Sharp objects may be present. Use precautions and protection.

Heavy object. Use lifting aids and proper lifting techniques when moving.

Parts List

INSTRUCTION

STEP 1
Note: Do Not Tighten Screws Until The End.

STEP 2
Note: Do Not Tighten Screws Until The End.

STEP 3

Note: Do Not Tighten Screws Until The End.

STEP 4
Note: Do Not Tighten Screws Until The End.

STEP 5
Note: Do Not Tighten Screws Until The End.

STEP 6
Note: Do Not Tighten Screws Until The End.

STEP 7
Note: Cable Routing Diagram.

Attention:
Please fully straighten the steel cable before threading. If twisting occurs during installation, please re-thread the cable after ensuring it is completely straightened.

STEP 8
Note: Tighten The Screws And Nylon Lock Nuts With A Tool.