HJSR81E Ble Remote Control Key Diagram
“
Product Information
Specifications:
- Model: HJSR81E
- Product Type: Remote Control Key
- Function: Motor one-click operation to ZG position, Multiplex
function, Flashlight control, Reuse function - Compliance: Part 15 of the FCC Rules
Product Usage Instructions:
1. Motor One-Click Operation:
To move the motor to the ZG position with the initial value,
press the corresponding key labeled ZG.
2. Multiplex Function:
Press and hold the flashlight key for about 5 seconds until the
backlight blinks. Within 2 seconds, press ZG. The buzzer will ring
3 times, recording the current motor position, massager, and light
bar status to ZG. This information is retained even after power
off.
3. Flashlight Control:
To turn the flashlight on or off (default 15 seconds), simply
press the flashlight key.
4. Reuse Function:
To enter the memorizable mode, hold down the button for 5
seconds until the backlight flashes. Press ZG within 2 seconds, and
the buzzer will beep sound, remembering the current motor position
and the status of the massager and light bar. Hold the flashlight
and LOCK (lock) simultaneously for about 3 seconds to have all keys
on the remote control enter the one-button mode.
5. Caution:
This device complies with Part 15 of the FCC Rules. Please
ensure that it does not cause harmful interference or be affected
by interference that may cause undesired operation. Any changes or
modifications not approved by the responsible party could void the
user’s authority to operate the equipment.
Frequently Asked Questions (FAQ):
Q: How do I reset the remote control key?
A: To reset the remote control key, you can perform a factory
reset by following these steps: 1. Press and hold the RESET button
for 10 seconds. 2. Release the button when the indicator lights
start flashing. 3. Your remote control key is now reset to its
default settings.
Q: What should I do if the backlight does not blink during
operation?
A: If the backlight does not blink as expected, check the
battery level and replace it if necessary. If the issue persists,
contact customer support for further assistance.
“`
HJSR81E Ble Remote control key diagram
Remote control function description
Key label
Feature
Motor one-click operation to ZG position (with initial
value)
Multiplex function: Press and hold the flashlight for
1
about 5s, the backlight blinks, press ZG within 2s, the
buzzer rings 3 times, and record the current motor
position, massager and light bar status to ZG. (Power off
does not clear)
Flashlight on/off (default 15s).
Reuse function: Hold down the button for 5s, the backlight flashes,
enter the memorizable mode, press ZG within 2s, the buzzer
2
“beep” sound, you can remember the current motor position
and the status of the massager and the light bar. Hold the flashlight +LOCK (lock) for about 3s at the
same time, the backlight flashes twice, and the keys in
all positions of the remote control enter the one-button
1
release mode, which can reset all memory positions to the factory default memory positions at the same time Press and hold the flashlight +FLAT for about 3s at the same time, the backlight flashes three times, the keys in all positions of the remote control enter the continuous press mode, release the key and stop the motor. Key lock function: Long press the key for 5 seconds, the backlight flashes 3 times, lock the remote control key, then the remote control key is unavailable, press the key other than the lock key, the backlight flashes 3 times 3 (power off and then power on to keep the lock state) Press the button again for 5 seconds, the backlight flashes 3 times, unlock the remote control button, then the remote control button can be used. Back rise: Hold down this key, the back motor starts to 4 rise, release this key, the back motor stops rising Leg rise: Hold down this key, the leg motor starts to rise, 5 release this key, the leg motor stops rising Back down: Hold down this key, the back motor starts to 6 fall, release this key, the back motor drop stops Leg drop: Hold down this key, leg motor start to drop, 7 release this key, leg motor drop stop FLAT one-button reset, all motors retracted to the minimum stroke position, turn off the massager, and keep 8 the lamp under the bed in the state before pressing the button (power-on without reset) Coding method: Keep pressing the head lift and foot drop buttons until the backlight flashes to clear the remote control code information; Power on the control box again, and the control box will be in the code alignment state within 60 seconds. Keep pressing the head down and foot up buttons of the remote control until the buzzer sounds and the backlight blinks, indicating that the code alignment is successful. Decoding mode: [remote control head up + foot down] The backlight flashes, indicating successful decoding * The control box has no reset function for code keys Note: Press any key over 50s, the remote control will enter sleep, release and press again to restore the function
2
Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: –Reorient or relocate the receiving antenna. –Increase the separation between the equipment and receiver. –Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. –Consult the dealer or an experienced radio/TV technician for help.
3
Documents / Resources
 |
Richmat HJSR81E Ble Remote Control Key Diagram [pdf] User Guide HJ8258, 2AJJGHJ8258, HJSR81E Ble Remote Control Key Diagram, HJSR81E, Ble Remote Control Key Diagram, Remote Control Key Diagram, Key Diagram, Diagram |