HJC11 Wireless Remote Control
“
Specifications:
- INPUT VOLTAGE: DC 29V
- Maximum current: 1A
- Installation size: 1.5m Wire harness
- Cooperate with the product: T85;C65;T79+T78A;SR96
- Color: Black (Leather Texture)
- Rated work schedule: 10% work schedule, working for 2 minutes
and resting for 20 minutes, totaling over 10000 hours - Usage environment: indoor environment, temperature 5-45°C,
humidity 45-75% RH, atmospheric pressure 86-106Kpa
Product Features:
- Simple structure and easy to use
- Flame retardant material, safe and reliable
- Multiple sockets, strong compatibility
- Side ear structure, easy to install
Product Usage Instructions:
- Ensure the input voltage is DC 29V.
- Connect the control box using the provided 1.5m wire
harness. - Make sure the product meets the compatibility requirements
(T85;C65;T79+T78A;SR96). - Install the control box in an indoor environment with
temperatures between 5-45°C and humidity of 45-75% RH. - Follow the rated work schedule of 10% work and rest intervals
as specified.
FAQ:
Q: What should I do if the product overheats?
A: The product is equipped with overheat protection. If it
overheats, the protection mechanism will activate to prevent any
damage. Allow the product to cool down before using it again.
Q: Can I use this product outdoors?
A: The product is designed for indoor use only. Using it
outdoors may affect its performance and longevity.
Q: How do I know if the product is compatible with my existing
setup?
A: Ensure that your existing setup aligns with the specified
cooperation products (T85;C65;T79+T78A;SR96) to ensure
compatibility.
“`
Document numberQ-HJ-C11-00
HJC11 Control box specification sheet
version
A
Changes
First release
Change of person Change date
Song Yukun
Reporter Song Yukun
reviewer
Approver
1 / 6
Product Features
Simple structure and easy to use; Flame retardant material, safe and reliable; Multiple sockets, strong compatibility; Side ear structure, easy to install
Specification parameters
INPUT VOLTAGEDC29V Maximum current1A Installation size1.5m Wire harness Cooperate with the productT85;C65;T79+T78A;SR96 Color: Black (Leather Texture) Rated work schedule, 10% work schedule, working for 2 minutes and resting for 20 minutes,
totaling over 10000 hours Usage environment: indoor environment, temperature 5-45 , humidity 45-75% RH, atmospheric
pressure 86-106Kpa The product meets the standards
Detailed socket
2 / 6
Mechanical properties
N Rev
o
project
Specification requirements
Is it notes
checked
1 Protectio IP20 NA
n grade
2 Body
Press the body with a vertical
strength pressure of 5Kgf for 15 seconds, with
the force surface being the entire
body and the front being the main
force. No mechanical damage, normal
function.
3 Bare
requirement:
machine There are no foreign objects inside
falling the machine;
No major appearance defects in the
manufacturing process;
Normal function;
Electrical control performance
N
Rev
project
o
1 Rated input
voltage
Specification requirements
AC 100-240V
3 / 6
Is it note checked s
2 maximum power 200W
3 Short circuit yes
protection
4 Overcurrent
yes
protection
5 Overheat
yes
protection
2.HJC11 Specification drawing
4 / 6
3.Specification code attachment1
5 / 6
Caution: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference. (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: –Reorient or relocate the receiving antenna. –Increase the separation between the equipment and receiver. –Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. –Consult the dealer or an experienced radio/TV technician for help.
6 / 6
Documents / Resources
 |
Richmat HJC11 Wireless Remote Control [pdf] User Manual HJC11 2AJJG, HJC11 2AJJG, HJC11, HJC11 Wireless Remote Control, HJC11, Wireless Remote Control, Remote Control, Control |