RICE LAKE 68539, 68541 Remote I/O Interface
Remote I/O Interface
Part Number/Price (Limited Supply)
| Part # | Description | Est. Weight | Price |
| 68539 | Allen-Bradley remote I/O (internal), for 720i/920i indicators | 3 lb | Consult |
Options/Accessories
| Part # | Description | Price |
| 69950 | Additional operating manual | Consult |
Standard Features
- 115 or 230 VAC operation
- Discrete data transfer
- Block data transfer
- Onboard diagnostic LED
Specifications
- Power: 5 VDC, 140 mA
- Communication Ports: Twin axial cable attachment to network at 57.6, 115.2 or 230.4 Kbps Update rate is dependent on the configured baud rate and the number of network modes
- Fieldbus Interface: Pluggable screw connector
- Diagnostic LED: Link status and module status
- Dimensions: 2.13 × 3.38 × 0.59 in (86 × 54 × 15 mm)
- Temperature Range: 14 °F to 158 °F (-10 °C to 70 °C)
DeviceNet™ Interface
Part Number/Price
| Part # | Description | Est. Weight | Price |
| 68541 | DeviceNet interface kit for 720i/920i indicators | 3 lb | Consult |
Options/Accessories
| Part # | Description | Price |
| 69949 | Additional operating manual | Consult |
Standard Features
- DeviceNet communication adapter
- Compact size for internal installation in 720 and 920i indicators
- Polled I/O connection
- 125 Kbps, 250 Kbps, and 500 Kbps baud rate
- Onboard LED diagnostics
- Floating-point commands support decimal points
Specifications
- Power: 5 VDC, 270 mA Fieldbus connector requires 24 VDC, ±10%
- Communication Ports: Twisted-pair cabling at 125, 250, or 500 Kbps Update rate is dependent on the configured baud rate and the number of network modes
- Fieldbus Interface: Pluggable screw connector
- Diagnostic LEDs: Module status and network status
- Dimensions: 2.13 × 3.38 × 0.59 in (86 × 54 × 15 mm)
- Temperature Range: 14 °F to 158 °F (-10 °C to 70 °C)
- Galvanic Isolation: Bus power is separated from other electronics via DC/DC converter. The send and receive signals are isolated via opto couplers.
Product Information
FIELDBUS CARDS – Remote I/O Interface
Part Number/Price (Limited Supply)
- Part # Description 68539 Allen-Bradley remote I/O (internal),
for 720i/920i indicators
Options/Accessories
- Part # Description 69950 Additional operating manual
- Est. Weight: 3lb
- Price: Consult
Specifications
- Power: 5 VDC, 140 mA
- Communication Ports: Twin axial cable attachment to network at 57.6, 115.2 or 230.4 Kbps. The update rate is dependent on the configured baud rate and the number of network modes.
- Fieldbus Interface: Pluggable screw connector
- Diagnostic LED: Link status and module status
Product Usage Instructions
Installation
- Ensure the power supply is rated at 5 VDC and 140 mA.
- Connect the Fieldbus card using a twin axial cable to the network at the desired baud rate.
- Securely plug the Fieldbus card into the screw connector.
- Verify the diagnostic LEDs show appropriate links and module statuses.
Configuration
Refer to the operating manual for detailed configuration steps.
FAQ
Q: What is the power requirement for the Fieldbus card?
A: The Fieldbus card requires 5 VDC and 140 mA of power.
Q: How do I know if the Fieldbus card is properly connected to the network?
A: Check the diagnostic LEDs on the card for link status and module status indications.
- www.ricelake.com
- Phone: 800-472-6703
- An ISO 9001:2015 Accredited Company © 2024 Rice Lake Weighing Systems 1/24 Prices and specifications are subject to change without notice. Visit ricelake.com for current prices.
Documents / Resources
 |
RICE LAKE 68539, 68541 Remote I/O Interface [pdf] Owner's Manual 68539, 68541, 68539 68541 Remote I O Interface, 68539 68541, Remote I O Interface, Interface |
