MSP 325N UHD 4K HDMI Video Encoder/Decoder
Product Information
Specifications
- Product Name: MSP 325N UHD 4K HDMI Video Encoder/Decoder
- Input Resolution: Up to 4K@60Hz
- Encoding/Decoding: H.265/H.264
- Protocols Supported: HTTP/SRT/RTMP/RTSP/NDI
- Power Supply: PoE & DC 12V
- Interface: HDMI, USB, Ethernet, USB-C
- Control: TAO Cloud integrated control
- Transmission Latency: Low latency transmission
Product Usage Instructions
Device Setup
- Connect the power cable to the DC power port using a 12V/2A
power adapter. - Connect the video source to the HDMI Input port.
- For network streaming, connect the Ethernet port to a router
supporting PoE. - If desired, connect a monitor to the HDMI Output port for
real-time preview.
Login to Device Management Page
- Power on the device and connect it to a router via
Ethernet. - Connect the HDMI OUT port to a display using an HDMI cable to
view the IP address assigned by the router. - Access the device management page by entering the IP address in
a web browser. Default login credentials are Username: admin,
Password: admin.
Video Input Checking
After connecting a video source, access the web management page
to preview the video in real-time. Click on the video preview
window to switch to video mode for smoother playback.
FAQ
Q: What should I do if the device indicators show abnormal
status?
A: If the indicators show abnormal status, check the power
connection, network settings, and device connections. Restart the
device if needed.
Q: Can I use a power adapter other than the one provided?
A: It is recommended to use the standard power adapter provided
with the device to avoid damage.
MSP 325N
UHD 4K HDMI Video Encoder/Decoder
Quick Start
Content
Product Overview …………………………………………………………………………….. 3
Key Features …………………………………………………………………………………………………… 3
In the Box ………………………………………………………………………………………… 3 Device Interface ………………………………………………………………………………..4 Device Indicators ………………………………………………………………………………4 Applications ……………………………………………………………………………………..5 Login to the device management page ……………………………………………….6
Video input checking ………………………………………………………………………………………..6 Streaming service …………………………………………………………………………………………….7
Restore factory settings …………………………………………………………………….8 Note …………………………………………………………………………………………………9
www.rgblink.com
2
Product Overview
Key Features
Small and compact, easy to carry H.265/H.264 high-performance encoding and decoding capability Input resolution up to 4K@60Hz HTTP/SRT/RTMP/RTSP/NDI protocols supported Multi-stream decoding capability Feature with one USB interface for recording PoE & DC 12V power supply TAO Cloud integrated control Low latency transmission
In the Box
MSP 325N
Power Cable DC 12V/2A
www.rgblink.com
3
Device Interface
Power Switch Power Port Line In HDMI Loop Out HDMI Input USB Port 1000M Ethernet Port HDMI Output USB-C
When powered on, push left to turn OFF, push right to turn ON Connect DC power plug (12V/2A or above) 3.5mm analog audio signal input port for connecting powered microphones Loops out the connected HDMI IN signal Connect HD cameras, computers, etc. Connect USB drives, external HDDs, or hubs for data storage/transfer For network live streaming, supports PoE power supply Connect monitors to view main picture switching Connect external UVC cameras
Device Indicators
Indicators
Name
Power LINK Run
Color
White White White
Status
Always on
Off Flashing
Off Flashing Always on
Off
Description
Power connected
Power off or failure Network connected Network disconnected/abnormal Working normally
Starting to work Working abnormal/not start
www.rgblink.com
4
Applications
Notes:
Please use the standard power adapter equipped in the package. Likewise, other unqualified power adaptor may damage the device.
Please make sure the camera is connected to the HDMI IN connector. If you wish, you can connect MSP 325N to your monitor for real time preview by HDMI
OUT. www.rgblink.com
5
Login to the device management page
The MSP 325N’s management page is accessed via its IP address. Setup steps: 1. Power on the MSP 325N and connect it to the router via Ethernet.
2. Connect the device’s HDMI OUT port to a display using an HDMI cable. The IP assigned by the router will appear on-screen (Example IP shown in the figure below. Use the actual router-assigned IP.).
ETH: 192.168.123.192
3. Open a browser and enter the IP address to access the web management page. The default username and password are: Username: admin Password: admin
Note:
To ensure your information security, it is recommended to revise your password after you log into for the first time.
Video input checking
After video source connected, you will be allowed to preview video in real time through web browser. Kindly note the video preview window is under “image” mode by default, and it is refreshed every 3 seconds. If your computer’s CPU performance is good, you can click the mouse to switch to the “video” mode, and the smoothness of the preview will be improved. www.rgblink.com
6
Streaming service
Click”+”on the right side of the stream service at the bottom of MSP 325N Web UI. Add a stream service, take RTSP protocol as an example.
Select RTSP, fill in the name, service port and session ID, the other setting parameters can remain default configuration, click “OK”.
www.rgblink.com
7
Notes:
The default RTSP port is 554, when add multiple RTSP service, different port number should be used.
Session ID can be any combination of numbers, letters and symbol.
After saving configurations, it will be displayed under the stream service, which is closed by default. Click switch to start the stream service, it will come up a RTSP stream address in the corresponding address.
Click icon
at the back of stream address, copy it and then check the encoded video stream by VLC.
Download VLC tool
Download and install VCL tool through official website https://www.videolan.org/vlc/, please follow the official VCL instructions for download method and installation process. VLC is a multimedia player and framework with free and open cross platform, which can play most of streaming media protocols.
Click media on the VLC – open network streaming – enter the URL address of RTSP over internet, click play at the lower right corner to start streaming.
Restore factory settings
If the device cannot work normally after modifies the parameters or forgot internet IP configuration and couldn’t search and find the device, please restore factory settings.
Two methods for restoring factory settings: 1) If you can login to web page, then via the WEB page, click “Settings–System settings–Restore factory
settings”.
www.rgblink.com
8
2) If you can’t login to web page, press the RESET button for 5 seconds in the bottom of device.
Note:
After restoring factory setting, below parameters will be turned to default value: Login username and password will be “admin”; IP address will be restored as 192.168.5.100, subnet mask will be 255.255.255.0;
All encoding parameters of video and audio will be restored to default value.
Note
To prolong the device lifeplease unplug the power and keep it properly if you do not use it for a long time.
www.rgblink.com
9
Xiamen RGBlink Science & Technology Co Ltd.
Tel: +86-592-5771197 Fax: +86-592-5788216 Customer Hotline: 4008-592-315 Web: http://www.rgblink.com E-mailsupport@rgblink.com Headquarter: The 6th floor, No. 37-3 Banshang Community,
Building 3, Xinke Plaza, Torch Hi-Tech Industrial Development Zone, Xiamen, China
©2025 RGBlink All rights reserved.
Documents / Resources
![]() |
RGBlink MSP 325N UHD 4K HDMI Video Encoder/Decoder [pdf] Instruction Manual MSP 325N UHD 4K HDMI Video Encoder Decoder, MSP 325N, UHD 4K HDMI Video Encoder Decoder, 4K HDMI Video Encoder Decoder, HDMI Video Encoder Decoder, Video Encoder Decoder, Encoder Decoder, Decoder |